To respond to the high demand for high dynamic range imaging suitable for moving objects with few artifacts, we have developed a single-exposure dynamic range image sensor by introducing a triple-gain pixel and a low noise dual-gain readout circuit. The developed 3 μm pixel is capable of having three conversion gains. Introducing a new split-pinned photodiode structure, linear full well reaches 40 ke−. Readout noise under the highest pixel gain condition is 1 e− with a low noise readout circuit. Merging two signals, one with high pixel gain and high analog gain, and the other with low pixel gain and low analog gain, a single exposure dynamic rage (SEHDR) signal is obtained. Using this technology, a 1/2.7”, 2M-pixel CMOS image sensor has been developed and characterized. The image sensor also employs an on-chip linearization function, yielding a 16-bit linear signal at 60 fps, and an intra-scene dynamic range of higher than 90 dB was successfully demonstrated. This SEHDR approach inherently mitigates the artifacts from moving objects or time-varying light sources that can appear in the multiple exposure high dynamic range (MEHDR) approach.
17 January 2022 in IEEE Transactions on Electron Devices
This article presents a global shutter (GS), stacked digital pixel sensor (DPS) to meet the ultra-low power, ultra high dynamic range (HDR) requirements for battery-powered, always-on mobile computer vision (CV) applications. The $4.6~\mu \text{m}$ DPS pixel is partitioned into two layers; a dual conversion gain (CG) pixel with a backside-illuminated photodiode (PD) on the top layer and an in-pixel ADC circuit with 10 bit SRAM on the bottom layer. A Cu-to-Cu hybrid-bonding (HB) technology is used to connect the two layers via pixel-level interconnect. The sensor features an overlapped triple quantization (3Q) scheme that performs a time-to-saturation (TTS) quantization and the dual-CG linear ADC mode sequentially in the same frame and extends the dynamic range (DR) with a small number of ADC bits. The DPS with a $512\times512$ pixel array has achieved an ultra-HDR of 127 dB and low power consumption of 5.75 mW at 30 frames per second. The nonlinear conversion characteristics of the TTS mode provide an equivalent full well capacity (FWC) of 9000 ke−, while the high CG linear ADC mode realizes a low noise floor of 4.2 e−.
In this paper, a prototype complementary metal-oxide-semiconductor (CMOS) image sensor with a 2.8-μm backside-illuminated (BSI) pixel with a lateral overflow integration capacitor (LOFIC) architecture is presented. The pixel was capable of a high conversion gain readout with 160 μV/e− for low light signals while a large full-well capacity of 120 ke− was obtained for high light signals. The combination of LOFIC and the BSI technology allowed for high optical performance without degradation caused by extra devices for the LOFIC structure. The sensor realized a 70% peak quantum efficiency with a normal (no anti-reflection coating) cover glass and a 91% angular response at ±20° incident light. This 2.8-μm pixel is potentially capable of higher than 100 dB dynamic range imaging in a pure single exposure operation.
A backside-illuminated complementary metal-oxide-semiconductor (CMOS) image sensor with 4.0 μm voltage domain global shutter (GS) pixels has been fabricated in a 45 nm/65 nm stacked CMOS process as a proof-of-concept vehicle. The pixel components for the photon-to-voltage conversion are formed on the top substrate (the first layer). Each voltage signal from the first layer pixel is stored in the sample-and-hold capacitors on the bottom substrate (the second layer) via micro-bump interconnection to achieve a voltage domain GS function. The two sets of voltage domain storage capacitor per pixel enable a multiple gain readout to realize single exposure high dynamic range (SEHDR) in the GS operation. As a result, an 80dB SEHDR GS operation without rolling shutter distortions and motion artifacts has been achieved. Additionally, less than −140dB parasitic light sensitivity, small noise floor, high sensitivity and good angular response have been achieved.
25 April 2022 in IEEE Transactions on Electron Devices
It is anticipated that ubiquitous computer vision (CV) and artificial intelligence (AI) applications used on mobile devices will grow significantly. Such applications require battery-powered, always-on mobile devices to support indoor/outdoor, day/night usages. A global shutter (GS), stacked digital pixel sensor (DPS) is a promising candidate to meet such requirements because of its potential for ultralow-power, ultrahigh dynamic range (HDR), and a small form factor. This article presents a prototype 4.0- ${\mu } \text{m}$ stacked DPS operating in its dual quantization (2Q) to realize HDR. The 4.0- ${\mu }\text{m}$ DPS pixel is formed with two layers, a backside illuminated pinned photodiode (PD) pixel on the top layer and an in-pixel analog-to-digital conversion (ADC) circuit with 9-bit static random access memory (SRAM) on the bottom layer. A Cu-to-Cu hybrid bonding (HB) technology is used to connect the two layers via pixel-level interconnect. In the 2Q scheme, a time-stamp (TS) quantization and a linear ADC are performed sequentially in the same frame, which extends the dynamic range (DR) with a small number of ADC bits of 9. The DPS with a 1024 $\times$ 832 pixel array has achieved a single-exposure ultra HDR of 107 dB in a single frame. The nonlinear conversion characteristic of the TS mode provides an equivalent full well capacity (FWC) of 2000ke−, while the noise floor in the linear ADC mode is 8.3e−.
In this paper, a Ku-band low-noise MMIC amplifier is presented, which is equipped with a bias circuit that compensates not only temperature dependence of the FETs' gain but also gain variation between chips due to process variations. The Ku-band low noise MMIC amplifier with proposed gate-bias circuit was designed and manufactured. It was proved that the proposed bias circuit reduced the temperature dependence of the two-stage MMIC amplifier's gain from 1.4 dB/100 K to 1.0 dB/100 K. The chip area consumed for the bias circuit is less than 10% of the total chip size of 1.17 mm/sup 2/. The gain variation between chips was reduced to 0.25 dB in RMS. This amplifier is suitable for active phased array applications.