In the course of increasing electric mobility, the effect of electricity on parts of machines is more significant than before. Rolling bearings and their lubrication, as a part of electric motors, are subjected to harmful currents, which lead to damage in the bearing in the long term. In order to avoid such damage, the influence of the lubricant in the bearing is becoming increasingly important. The electrical behaviour of the system can be investigated by analysing the discharge currents and the breakdown voltage in rolling bearings with lubricants of different compositions. This paper presents a procedure for characterizing the breakdown voltage at the rolling bearing and the influence of conductivity of the lubricants on harmful electrical phenomena.

The effect of variable DC bearing current amplitude, bearing current polarity, mechanical force, rotation speed, bearing temperature, and number of the balls on the fluting in an axial ball bearing type 51208 is investigated under DC currents. The results are obtained from two different test setups with two different lubricants (mineral-oil-based grease and polyglycol oil). The speed varies between 100 rpm and 2000 rpm, the axial bearing force between 200 N and 2400 N, the DC current amplitude between 0.5 A and 20 A, the bearing temperature between 29 °C and 80 °C, the number of steel balls per bearing between 3 and 15, and the test duration between 6 h and 168 h. The results show that with a higher bearing current density and/or a higher bearing speed, a lower bearing force and/or a lower bearing temperature, a bigger number of roller elements, but also at a negative polarity of a DC electric bearing current, the occurring of fluting is more probable and occurs at an earlier stage of operation.