The need to minimize surfactant adsorption on rock surfaces has been a challenge for surfactant-based, chemical-enhanced oil recovery (cEOR) techniques. Modeling of adsorption experimental data is very useful in estimating the extent of adsorption and, hence, optimizing the process. This paper presents a mini-review of surfactant adsorption isotherms, focusing on theories of adsorption and the most frequently used adsorption isotherm models. Two-step and four-region adsorption theories are well-known, with the former representing adsorption in two steps, while the latter distinguishes four regions in the adsorption isotherm. Langmuir and Freundlich are two-parameter adsorption isotherms that are widely used in cEOR studies. The Langmuir isotherm is applied to monolayer adsorption on homogeneous sites, whereas the Freundlich isotherm suites are applied to multilayer adsorption on heterogeneous sites. Some more complex adsorption isotherms are also discussed in this paper, such as Redlich–Peterson and Sips isotherms, both involve three parameters. This paper will help select and apply a suitable adsorption isotherm to experimental data.

Polymer flooding is one of the most promising techniques for the recovery of remaining oil from light oil reservoirs. Water soluble polymers are used to enhance the viscosity of displacing fluid and to improve the sweep efficiency. In this paper, water soluble polymers used for chemical enhanced oil recovery are reviewed. Conventional and novel modified polymers are discussed along with their limitations. The review covers thermal stability, rheology, and adsorption behavior of various polymer systems in sandstone and carbonate reservoirs. Field and laboratory core flooding data of several polymers are covered. The review describes the polymer systems that are successfully applied in low-temperature and low-salinity reservoirs. Comprehensive review of current research activities aiming at extending polymer flooding to high-temperature and high-salinity reservoirs is performed. The review has identified current and future challenges of polymer flooding.