In this paper, a new metamaterials-based hypersensitized liquid sensor integrating omega-shaped resonator with microstrip transmission line is proposed. Microwave transmission responses to industrial energy-based liquids are investigated intensively from both numerical and experimental point of view. Simulation results concerning three-dimensional electromagnetic fields have shown that the transmission coefficient of the resonator could be monitored by the magnetic coupling between the transmission line and omega resonator. This sensor structure has been examined by methanol–water and ethanol–water mixtures. Moreover, the designed sensor is demonstrated to be very sensitive for identifying clean and waste transformer oils. A linear response characteristic of shifting the resonance frequency upon the increment of chemical contents/concentrations or changing the oil condition is observed. In addition to the high agreement of transmission coefficients (S21) between simulations and experiments, obvious resonant-frequency shift of transmission spectrum is recognized for typical pure chemical liquids (i.e., PEG 300, isopropyl alcohol, PEG1500, ammonia, and water), giving rise to identify the type and concentration of the chemical liquids. The novelty of the work is to utilize Q factor and minimum value of S21 as sensing agent in the proposed structure, which are seen to be well compatible at different frequencies ranging from 1–20 GHz. This metamaterial integrated transmission line-based sensor is considered to be promising candidate for precise detection of fluidics and for applications in the field of medicine and chemistry.

The detection of branded and unbranded chemical materials is essential for the quality control assessment. In this work, a metamaterial inspired sensor is designed and fabricated, which incorporates oval-shaped wing resonators, in order to use to detect branded and unbranded diesels in the X-band frequency region. The simulation studies were carried out by using the Computer Simulation Technology (CST) Microwave studio. A transmission line was introduced into the sensor design and genetic algorithm was used to optimize the proposed structure. Parametric study was investigated by changing the permittivity, permeability of the sensor layer, width of the transmission line, materials of the substrate layer, and width of the resonator. Results showed that different factors can be considered to sense the chemical materials including the shift in resonant frequency and amplitude variation in the reflection or transmission spectrum. It was found that the sensible variation in the transmission value is about −3.2 dB, which is superior to that reported in literature. It was concluded that the sensor is highly sensitive to distinguish the branded diesel from the unbranded one, which makes it viable for detecting fluidics in the chemical industry and medicine.

Improvement in the antenna gain is usually achieved at the expense of bandwidth and vice versa. This is where the realization of this enhancement can be made through compromising the antenna profile. In this work, we propose a new design of incorporating periodic metasurface array to enhance the bandwidth and gain while keeping the antenna to a low-profile scheme. The proposed antenna was simulated and fabricated in order to validate the results in the operating frequency range from 10 MHz to 43.5 GHz. Computer simulation technology (CST) microwave studio software was used to design and simulate the proposed antenna, while LPKF prototyping PCB machine was utilized to fabricate the antenna. Results showed that the antenna generated a gain and bandwidth of 14.2 dB and 2.13 GHz, respectively. Following the good agreement between the numerical and measurement results, it is believed that the proposed antenna can be potentially attractive for the application of satellite communications in Ku-band electromagnetic wave.

In this work, the impact of substrate type and design dimensions on bow-tie microstrip antenna performance and bandwidth improvement is presented both numerically and experimentally at 4–8 GHz. The finite integration technique (FIT)-based high-frequency electromagnetic solver, CST Microwave Studio, was used for the simulation analysis. For this purpose, four bow-tie microstrip antennas were designed, fabricated, and measured upon using different materials and substrate thicknesses. Precise results were achieved and the simulated and experimental results showed a good agreement. The performance of each antenna was analyzed and the impact of changing material permittivity, antenna dimensions and substrate thicknesses on antenna performance were investigated and discussed. The measured results indicated that the slot bow-tie antenna, which is one of the novel aspects of this study, is well matched and a 2-GHz bandwidth [5–7 GHz] is obtained, which is about 50% bandwidth in comparison with the wideband applications [4–8 GHz]. The proposed structure is useful in ultra-wideband (UWB) applications. This study provides guidance in selecting material types and thicknesses for microstrip antennas based on desired applications.

In this research work, a symmetrical four-capacitance loaded complementary circular split ring resonator is proposed, which uses an ultra-thin Zinc Selenide (ZnSe) substrate to realize a low-profile triple-band metamaterial (MTM) perfect absorber for application in the terahertz (THz) frequency range. The electromagnetic properties of the proposed structure were calculated and investigated using the Finite Integration Technique (FIT). The proposed structure exhibited three highly absorptive (nearly perfect) peaks at the resonance frequencies of 15.68 THz, 37.48 THz, and 39.55 THz. Furthermore, the absorber was found to be insensitive to the polarization and incident wave angles, due to its symmetrical design. The effects of the conductor type, substrate thickness, unit cell dimension, resonator gap, and substrate type on the reflection and absorption spectra were investigated. To validate the numerical results, the proposed design was analyzed using High-Frequency Simulation Software (HFSS) and Advanced Design System (ADS). The surface current, electric field, and magnetic field distributions at the three-resonance frequency were analyzed. It was concluded that the overall performance of the proposed MTM structure was superior compared to those reported in the literature. The proposed design could be a good candidate for application in stealth technology, imaging, and thermal energy harvesting.

In this work, a new design for a real-time noninvasive metamaterial sensor, based on a corona-shaped resonator, is proposed. The sensor was designed numerically and fabricated experimentally in order to be utilized for efficient detection of glucose in aqueous solutions such as water and blood. The sensor was inspired by a corona in-plane-shaped design with the presumption that its circular structure might produce a broader interaction of the electromagnetic waves with the glucose samples. A clear shift in the resonance frequency was observed for various glucose samples, which implies that the proposed sensor has a good sensitivity and can be easily utilized to distinguish any glucose concentration, even though their dielectric coefficients are close. Results showed a superior performance in terms of resonance frequency shift (1.51 GHz) and quality factor (246) compared to those reported in the literature. The transmission variation level $∆\left|{\mathrm{S}}_{21}\right|$ was investigated for glucose concentration in both water and blood. The sensing mechanism was elaborated through the surface current, electric field and magnetic field distributions on the corona resonator. The proposed metamaterials sensor is considered to be a promising candidate for biosensor and medicine applications in human glycaemia monitoring.