Robert Smolarz

Mr. Robert Smolarz

AGH - University of Science and Technology
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2021 in IEEE Access
Verified
Journal Article
Open access
Robert SmolarzRobert Smolarz
Robert Smolarz
SGSlawomir Gruszczynski
Slawomir Gruszczynski
KWKrzysztof Wincza
Krzysztof Wincza
An ultra-broadband multisection directional coupler designed in Monolithic Microwave Integrated Circuit (MMIC) technology has been presented. It has been shown for the first time that it is possible to achieve bandwidths exceeding one frequency decade, simultaneously taking under account technological constrains. The proposed directional coupler is composed of three coupled-line sections having different values of electrical lengths and coupling coefficients. The strongest coupled section has been designed as an asymmetric three-strip coupled-line section, whereas the rest of the sections have been implemented as symmetric two-strip coupled-line structures. To improve electrical performance of the coupler, a compensation method has been implemented together with loss analysis which has to be considered in lossy inhomogeneous medium. The proposed 3-dB directional coupler has been designed in PH25 process based on gallium arsenide (GaAs) from United Monolithic Semiconductors (UMS), and fabricated. The measurement confirms applicability of the design method in monolithic technology for such networks operating in bandwidth exceeding one frequency decade.

2 November 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Robert SmolarzRobert Smolarz
Robert Smolarz
KWKrzysztof Wincza
Krzysztof Wincza
SGSlawomir Gruszczynski
Slawomir Gruszczynski
A new approach to the synthesis of broadband branch-line couplers with arbitrary coupling level was investigated in this paper. It was shown that the operational bandwidth of a classic branch-line coupler can be increased by utilizing N-section impedance transformers added to each of the coupler’s ports. Furthermore, the obtained response can be approximated by the Chebyshev polynomial. Moreover, it was proven that for such couplers a range of coupling coefficient values can be obtained by the modification of classic branch-line topology. The analysis of the electrical parameters of the proposed branch-line couplers was comprehensively investigated. To verify the correctness of the proposed design procedures, 3-dB, and 6-dB broadband branch-line couplers operating at the center frequency of 2 GHz having return losses greater than 20 dB were designed, fabricated, and measured.

19 February 2021 in IEEE Access
Verified
Journal Article
Open access
Robert SmolarzRobert Smolarz
Robert Smolarz
KSKamil Staszek
Kamil Staszek
KWKrzysztof Wincza
Krzysztof Wincza
SGSlawomir Gruszczynski
Slawomir Gruszczynski
A microwave sensor realized in monolithic technology, intended for permittivity estimation with the use of a highly sensitive coupled-line section, is presented in this paper. It also contains a dedicated measurement circuitry realized as a five-port correlator, therefore, a simple scalar power measurement can be utilized to obtain vector signal corresponding to the measured material without the usage of an external vector network analyzer. To suppress systematic measurement errors arising from the manufactured circuit's imperfections it is equipped with an integrated calibration block, the parameters of which can be simply tuned with two biasing voltages. The sensor is calibrated following a recently reported procedure, which requires neither known nor specific calibration values, in contrast to other methods with much stronger constraints. It is shown for the first time, that a measurement system incorporating a multiport correlator can be successfully calibrated with such arbitrarily chosen settings of the calibration block. To experimentally validate correctness of the calibration's convergence, the developed sensor is calibrated multiple times with different sets of the calibration block's settings, each time resulting in the same output values. It proves that the approach to calibration of measurement systems incorporating the multiport correlator can be significantly simplified with no impact on calibration accuracy. Finally, the measurement of the sensor's response for two dielectric samples clearly demonstrates the advantages of the utilized calibration.

1 October 2017
Verified
Conference Paper
Closed access
KJKonrad Janisz
Konrad Janisz
Robert SmolarzRobert Smolarz
Robert Smolarz
Artur RydoszArtur Rydosz
Artur Rydosz
KWKrzysztof Wincza
Krzysztof Wincza
SGSlawomir Gruszczynski
Slawomir Gruszczynski
An investigation on the design of Lange couplers in suspended microstrip technique is presented. The chosen realization technique allows for minimization of total losses in the coupler. The theoretical analysis shows that the Lange couplers can be compensated with the proper selection of dielectric stratification of the substrate, and by the proposed compensation both isolation and impedance match of the coupler can be enhanced. The presented theoretical investigation has been supported by measurements of a 3-dB directional coupler exhibiting good electrical properties and low total losses.

1 May 2019
Verified
Conference Paper
Closed access
Robert SmolarzRobert Smolarz
Robert Smolarz
KWKrzysztof Wincza
Krzysztof Wincza
SGSlawomir Gruszczynski
Slawomir Gruszczynski
In this paper, for the first time the design of a tandem directional coupler operating in differential mode has been shown. To equalize phase velocities, the proposed directional coupler has been realized in homogeneous multilayer structure. To verify applicability of such a concept the 3-dB differentially-fed tandem directional coupler, operating at 1 GHz center frequency has been designed, fabricated, and measured.

11 December 2019 in Electronics
Verified
Journal Article
Open access
PDF file
SGSlawomir Gruszczynski
Slawomir Gruszczynski
Robert SmolarzRobert Smolarz
Robert Smolarz
KWKrzysztof Wincza
Krzysztof Wincza
The problem of the realization of broadband quadrature directional couplers in UMS (United Monolithic Semiconductors) PH25 is thoroughly investigated. The limitations of the selected technology are discussed with respect to directional couplers’ design. It is shown that, in such technologies, two major problems have to be overcome to achieve the high-performance of the resulting integrated couplers, i.e., the realization of appropriate coupling together with appropriate characteristic impedances, and the equalization of inductive and capacitive coupling coefficients that are inherently different in inhomogeneous dielectric structures. Three different solutions that allow for achieving strong coupling in the selected UMS PH25 process were selected and experimentally investigated, showing the possibility of such circuits’ realization. In each of the presented integrated couplers, capacitive compensation techniques were applied for coupling coefficients’ equalization.