The current development of science and the contemporary market, combined with high demands from consumers, force manufacturers and scientists to implement new solutions in various industries, including the packaging industry. The emergence of new solutions in the field of intelligent packaging has provided an opportunity to extend the quality of food products and ensures that food will not cause any harm to the consumer’s health. Due to physical, chemical, or biological factors, the state of food may be subject to degradation. The degradation may occur because the packaging, i.e., the protective element of food products, may be damaged during storage, transport, or other logistic and sales activities. This is especially important since most food products are highly perishable, and the maintenance of the quality of a food product is the most critical issue in the entire supply chain. Given the importance of the topic, the main purpose of this article was to provide a general overview of the application of biosensors, sensors, and tags in intelligent packaging used for food products. A short history and the genesis of intelligent packaging are presented, and the individual possibilities of application of sensors, biosensors, gas sensors, and RFID tags, as well as nanotechnology, in the area of the packaging of food products are characterized.
The paper presents the results of an experiment on the effect of pre-sowing stimulation of seeds with atmospheric pressure plasma jet operating with dielectric barrier discharge (DBD plasma jet) on the process of germination of Thuringian Mallow (Lavatera thuringiaca L.). Five groups of seeds characterized by a different exposure times (1, 2, 5, 10 and 15 minutes) as well as untreated seeds—control were used. Pre-sowing plasma stimulation of seeds improved germination parameters such as: germination capacity and germination energy for all tested groups relative to control. The highest germination parameters were obtained for seeds stimulated with plasma for the exposure times of 2 and 5 min. The analysis of the contact surface angle indicated the decrease of its’ mean values upon seed stimulation while no statistical effects were observed. Analysis of the SEM scans revealed the increase in seed pattern intensity which could be attributed to removing of the surface parts of cuticle possibly covered with wax upon short time—2 and 5 min plasma treatment. Such a phenomenon can act similarly to mechanical scarification of seeds. Longer exposure of seeds to plasma resulted in affecting the deeper zone of cuticle and damage or fracture of some parts of the cuticle. Lower germination parameters of seeds upon longer exposure times to plasma may indicate mechanical damage of the seeds.
Functional foods include cold-pressed oils, which are a rich source of antioxidants and bioactive n-3 and n-6 polyunsaturated fatty acids. The aim of this study was to assess the quality of rapeseed oils supplemented with Spanish sage and cress oils. Seven oil mixtures consisting of 70% of rapeseed oil and 30% of sage and/or cress oil were prepared for the analyses. The oil mixtures were analyzed to determine their acid value, peroxide value, oxidative stability, and fatty acid composition. In terms of the acid value and the peroxide value, all mixtures met the requirements for cold-pressed vegetable oils. The enrichment of the rapeseed oil with α-linolenic acid-rich fats resulted in a substantially lower ratio of n-6 to n-3 acids in the mixtures than in the rapeseed oil. The mixture of the rapeseed oil with the sage and cress oils in a ratio of 70:10:20 exhibited higher oxidative stability than the raw materials used for enrichment and a nearly 20% α-linolenic acid content. The oils proposed in this study can improve the ratio of n-6:n-3 acids in modern diets. Additionally, mixing the cress seed oils with rapeseed oil and chia oil resulted in a reduction in the content of erucic acid in the finished product. This finding indicates that cress seeds, despite their high content of erucic acid, can be used as food components. The production of products with a positive effect on human health is one of the most important factors in the sustainable development of agriculture.
The paper presents the comparison of quality of six different commercial apple juices produced in Poland. The apple juices came from two different Polish companies. From each manufacturer three various juices were selected: two cloudy and clarified one produced as a mixture of different apple varieties. The following properties were evaluated: density, soluble solid content, viscosity, total phenolic contents, phenolic acid, and antiradical activity. The obtained results showed that three from fourth cloudy juices (M1Sz, M1A and M2A) differed from clarified juices. The highest differences were noticed for total phenolic contents, phenolic acids, antiradical activity and viscosity. The values of these properties ranged between 60.72–103.6 mg GAE·100−1 mL−1 for phenolic contents, 78.3–90.9% for antiradical activity and 2.68–5.79 mPa·s for viscosity. The remaining cloudy juice (M2Sz) was more similar to the clarified ones. The strong correlation between total phenolic content and antiradical activity of apple juices was found. The high correlation coefficient obtained between these features indicates that both producers do not apply excessive amounts of vitamin C during the production of cloudy apple juices. There was also a strong interrelation between the density of juice and solid soluble content. However, no correlation was found between the solid soluble content and the viscosity of the tested juices.
Cold Atmospheric pressure Plasma (CAP) is a non-thermal method used in food processing. CAP generated with the use of nitrogen in a Glide-arc device for 300 to 600 s exhibited high potential for microbial decontamination and did not induce substantial changes in the physicochemical properties of NFC tomato juice. Samples exposed to cold atmospheric plasma had mostly an intact structure, as revealed by digital microscopy. The investigations indicate that CAP can be applied for biological and chemical waste-free decontamination of food and extension of its shelf life.
Extending the shelf life of fruit and vegetable juices plays a key role in improving food security. Ultrasonic technology can be an effective method in the process of replacing traditional heat treatment. It offers a number of benefits, such as better product quality expressed as a higher content of bioactive substances and the preservation of the natural sensory characteristics of the juice: consistency, colour, taste and smell. This paper discusses the methods of ultrasound generation, the equipment used and advances in the construction of ultrasound devices. The influence of ultrasounds on the physical and chemical properties of juices was also analysed, with particular emphasis on bioactive substances and the effectiveness of ultrasonic treatment in the inactivation of microorganisms and enzymes. Prospects and trends in the development of ultrasonic techniques that can effectively increase the efficiency of the ultrasonic juice preservation process are also described. Sonication used alone or with other processing techniques makes it possible to achieve a positive effect on the quality of consumed fruit and vegetable juices.