Aluminum alloys such as AA2024 are popular in the automotive and aircraft industries. The application of artificial aging significantly improves their mechanical properties by precipitation hardening. However, commercial alloys very often contain different amounts of elements such as Si and Fe that make the evolution of the microstructure harder to control. Large intermetallic particles can influence the overall results of heat treatment and cause deterioration of material properties. The authors decided to examine changes in the microstructure of three commercial 2024 alloys with varying chemical compositions by applying three different types of aging treatments. The results show considerable differences in the amount, size and morphologies of the precipitates. Second-phase Al₂Cu and Al₂CuMg precipitates were identified in one of the alloys. Other interesting types of multiphase particles were discovered in alloys with higher Si contents. The results show that even small variations in the composition can lead to a completely different microstructure.

Nanoindentation tests are useful for determining the local mechanical properties of materials. However, the method has its limitations, and its accuracy is strongly influenced by the nano-scale geometry of the indented area. The authors chose to perform measurements of the hardness and elastic modulus of intermetallic particles in 2024 aluminium alloys. The objective of this study was to investigate the influence of the particles’ depth and shape on the accuracy of the nanoindentation result. Several simulations were performed with the use of the finite element method on different geometries mirroring possible real-life configurations of the particle and matrix. The authors compared the force vs. deformation curves for all of the variants. The results showed that the nanoindentation process is different for a particle with the same mechanical properties depending on its depth under the investigated surface. Therefore, the measured values of hardness and elastic modulus for intermetallic particles are partly the result of interaction with a matrix.

The Cellular Automata represent a universal method of modelling and simulation. They enable the performance of calculations for even the most complex processes and phenomena. They are also used successfully in mechanical and material engineering. In this paper, the concept of application of the...