Paulina Byczkowska

Ms. Paulina Byczkowska


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
Emila Brancewicz-SteinmetzEmila Brancewicz-Steinmetz
Emila Brancewicz-Steinmetz
Jacek SawickiJacek Sawicki
Jacek Sawicki
PBPaulina Byczkowska
Paulina Byczkowska
A 3D printer in FDM technology allows printing with two nozzles, which creates an opportunity to produce multi-material elements. Printing from two materials requires special consideration of the interface zone generated between their geometrical boundaries. This article aims to present the possibility of printing with PLA and TPU using commercially available filaments and software to obtain the best possible bond strength between two different polymers with respect to printing parameters, surface pattern (due to the material contact surface’s roughness), and the order of layer application. The interaction at the interface of two surfaces of two different filaments (PLA-TPU and TPU-PLA) and six combinations of patterns were tested by printing seven replicas for each. A total of 12 combinations were obtained. By analyzing pairs of samples (the same patterns, different order of materials), the results for the TPU/PLA samples were better or very close to the results for PLA/TPU. The best variants of pattern combinations were distinguished. Well-chosen printing parameters can prevent a drop in parts efficiency compared to component materials (depending on the materials combination).

28 August 2020 in International Journal of Occupational Safety and Ergonomics
Verified
Journal Article
Open access
PKPaulina Kropidłowska
Paulina Kropidłowska
EIEmilia Irzmańska
Emilia Irzmańska
PZPiotr Zgórniak
Piotr Zgórniak
PBPaulina Byczkowska
Paulina Byczkowska
The objective of the work was to examine the mechanical strength properties of polycarbonate toecaps designed for commercially available protective footwear, subjected to repeated impacts simulating workplace conditions. The effects of impacts on the toecaps were expressed as the height of toecap clearance, which has a direct bearing on the safe use of protective footwear. Changes in toecap geometry were evaluated using an originally developed methodology taking into consideration the requirements of the Standard No. EN ISO 22568-2. Additionally, the external and internal sides of toecaps were scanned in 3D after each impact and reversed engineering was used to analyze deformations in toecap geometry by comparing the shape of the toecaps before and after impacts. Three-dimensional scanning made it possible to measure the remaining safe distance for toes between the footwear sole and the impacted toecap surface, which is a indicator of the protective properties and safety of toecaps during use.

1 March 2018 in Archives of Materials Science and Engineering
Verified
Journal Article
Closed access
KKK. Krupanek
K. Krupanek
ASAnna Staszczyk
Anna Staszczyk
Jacek SawickiJacek Sawicki
Jacek Sawicki
PBPaulina Byczkowska
Paulina Byczkowska

3 September 2017 in Advances in Science and Technology Research Journal
Verified
Journal Article
Open access
PBPaulina Byczkowska
Paulina Byczkowska
Jacek SawickiJacek Sawicki
Jacek Sawicki
Bartłomiej JanuszewiczBartłomiej Januszewicz
Bartłomiej Januszewicz
MSMariusz Stegliński
Mariusz Stegliński
The bead blasting process is widespread in both the automotive and aerospace industry and is performed in order to improve the fatigue strength of various components. Bead blasting is a cold plastic forming process during which the surface of the material processed is hit by small, hard particles...

25 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
GBGrzegorz Bechcinski
Grzegorz Bechcinski
NKNorbert Kępczak
Norbert Kępczak
WPWitold Pawlowski
Witold Pawlowski
WSWojciech Stachurski
Wojciech Stachurski
PBPaulina Byczkowska
Paulina Byczkowska
The article reports the results of experimental study of vibratory surface grinding in the range of low excitation frequencies and variable directions of excited vibrations in the plane of the table, and investigates the effect of these directions on the roughness and waviness of the ground surface. The tests were conducted on a production surface grinder with a vibrating table on which the samples were mounted. The table made it possible to change the direction for the introduction of vibrations to the workpiece (longitudinally, transversely, and obliquely to the longitudinal feed of the table) and the parameters of the introduced vibrations, frequency and amplitude. In the course of the study, selected parameters of surface roughness and waviness of samples ground conventionally and with vibrations introduced on the workpiece were compared. The results show an improvement in the roughness and waviness parameters of the vibration-ground surfaces compared to surfaces ground without vibration (conventionally). The profile of the ground surface was subjected to Fourier analysis and the harmonic components of the surface shape of the ground samples were determined to characterize the effect of the introduced vibrations on the surface roughness. It was determined that the direction of vibration introduction, which is most favorable in terms of the parameters of the geometric structure of the ground surface, is the direction perpendicular to the longitudinal feed of the grinding table. In other directions of vibration introduction, the simultaneous effect of improving both parameters of the geometric structure of the ground surface profile was not obtained.

1 June 2016 in Archives of Metallurgy and Materials
Verified
Journal Article
Open access
PDF file
MSMariusz Stegliński
Mariusz Stegliński
PBPaulina Byczkowska
Paulina Byczkowska
Jacek SawickiJacek Sawicki
Jacek Sawicki
Łukasz KaczmarekŁukasz Kaczmarek
Łukasz Kaczmarek
Bartłomiej JanuszewiczBartłomiej Januszewicz
Bartłomiej Januszewicz
MKM. Klich
M. Klich
An improvement in fatigue strength is one of the main factors enabling the use of high-durability Al-Mg-Mn-Sc-Zr alloys in functional components of mobile robots. As part of this study, a computer simulation was carried out using ANSYS LS-DYNA software that involved the hybridization of high pressure torsion (HPT) and shot peening (SP) forming processes. The numerical analysis was aimed at determining residual stresses and strains that affect the durability and stress characteristics of the analyzed Al alloy. Results of the study indicate that tensile stresses of σ = 300 MPa generated as a result of HPT are transformed into a beneficial stress of σ = 25 MPa resulting from plastic strains caused by SP surface treatment.