Maria Margareth Silva

Prof. Maria Margareth Silva

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 November 2019 in Metals
Verified
Journal Article
Open access
PDF file
DDDavid Dias
David Dias
OSOsmar Sousa Santos
Osmar Sousa Santos
WAWellington Alves
Wellington Alves
MLMilton Sergio Fernandes Lima
Milton Sergio Fernandes Lima
MSMaria Margareth Silva
Maria Margareth Silva
The surface melting of a NiTi superelastic alloy using a high-power laser Yb:Fiber was investigated. The influence of this process on the microstructural and mechanical properties was also examined. The reference material was a 3 mm nitinol strip with a homogeneous austenitic B2 phase. For the laser surface melting process, input fluences were applied from 17.5 to 45 J/mm2. The morphology of the structure and the chemical composition of several regions were determined by optical microscopy, scanning electron microscopy, dispersive energy spectra, and X-ray diffraction techniques. The mechanical properties, such as modulus of elasticity and hardness, were determined using nanoindentation and microindentation techniques. The greatest surface finishing of the fusion zone was observed for the condition 35 J/mm2. Three well-defined regions (fusion zone (FZ), heat-affected zone (HAZ), base metal (BM)) could be observed and dimensions of grain size, width, and depth of the melted pool were directly affected by the laser fluence. The geometry of the molten pool could be controlled by the optimization of the laser parameters. High laser fluence caused preferential volatilization of nickel, dynamic precipitation of intermetallic phases, including Ti2Ni, Ni3Ti, and Ni4Ti3, as well as solubilization of TiC in the matrix, which led to grain refinement. Thus, high laser fluence is a suitable technique to enhance mechanical properties such as hardness and Young’s modulus.

1 March 2006 in Materials Research
Verified
Journal Article
Open access
PDF file
MSMaria Margareth Silva
Maria Margareth Silva
MUMário Ueda
Mário Ueda
COChoyu Otani
Choyu Otani
HRHelfried Reuther
Helfried Reuther
CLCarlos Maurício Lepienski
Carlos Maurício Lepienski
JOJorge Otubo
Jorge Otubo
Based on the fact that the Ti-6Al-4V alloy has good mechanical properties, excellent resistance to corrosion and also excellent biocompatibility, however with low wear resistance, this work aims to test plasma processes or combination of plasma and ion implantation processes to improve these characteristics. Two types of processing were used: two steps PIII (Plasma Immersion Ion Implantation) combined with PN (Plasma Nitriding) and single step PIII treatment. According to Auger Electron Spectroscopy (AES) results, the best solution was obtained by PIII for 150 minutes resulting in ~ 65 nm of nitrogen implanted layer, while the sample treated with PIII (75 minutes) and PN (75 minutes) reached ~ 35 nm implanted layer. The improvement of surface properties could also be confirmed by the nanoindentation technique, with values of hardness increasing for both processes. AFM (Atomic Force Microscopy) characterization showed that the single step PIII process presented greater efficiency than the duplex process (PIII + PN), probably due to the sputtering occurring during the second step (PN) removing partially the implanted layer of first step (PIII)

1 January 2021 in Materials Research
Verified
Journal Article
Open access
PDF file
RCR. Chales
R. Chales
ACA.S.M. Cardoso
A.S.M. Cardoso
JPJ.M. Pardal
J.M. Pardal
STSergio Souto Maior Tavares
Sergio Souto Maior Tavares
MSMaria Margareth Silva
Maria Margareth Silva
BGBreno Galizoni
Breno Galizoni
Maraging steels are ferrous alloys with Ni, Co, Mo, and Ti additions. These materials are a special class of ultra high mechanical strength steels with wide and special applications in strategic areas, which makes their knowledge very valuable. Computational advances allowed to analyze the behavior of these materials numerically, using the finite element method and developing mathematical models that can represent numerically its mechanical behavior. The present work has the objective of surveying the mechanical properties of maraging steels 300 and 350 by slow strain rate tensile (SSRT) tests, after the solution treatment at 1183K for 1h. Additionally, it was evaluated the hydrogen embrittlement in samples tested by SSRT under cathodic protection with a potential -1.2 VSCE in 3.5% NaCl solution. The study was complemented with detailed fractographic analysis. This work also presents the analysis of representative models by use of Hollomon, Swift, Voce and coupled Swift-Voce equations to describe the strain-hardening behavior. Compared to the others, the Voce’s model was the one which best fitted the experimental results, with values of R2 higher than 0.992. Through the variation of the chemical composition found in the different grades of maraging steels, this work contemplates the creation of a generalized Voce model based on the variation of the Ti content. The work concludes presenting the generalized Voce model proposed and a numerical analysis of the SSRT results with a good accuracy of the strain-hardening response.

11 January 2022 in International Journal of Fracture
Verified
Journal Article
Closed access
PDF file
RCRodrigo Chales
Rodrigo Chales
ACAndréia de Souza Martins Cardoso
Andréia de Souza Martins Cardoso
PGPedro Soucasaux Pires Garcia
Pedro Soucasaux Pires Garcia
HIHugo Ribeiro da Igreja
Hugo Ribeiro da Igreja
BABrígida Bastos de Almeida
Brígida Bastos de Almeida
MSMaria Margareth Silva
Maria Margareth Silva

23 February 2023 in Surface Topography: Metrology and Properties
Verified
Journal Article
Closed access
FRFabrícia Assis Resende
Fabrícia Assis Resende
MSMaria Margareth Silva
Maria Margareth Silva
RORogério de Moraes Oliveira
Rogério de Moraes Oliveira
CSCarla Silva
Carla Silva
LPLuc Pichon
Luc Pichon
BGBreno Galizoni
Breno Galizoni
Ti-6Al-4V alloy is ideal for use in the aeronautical and aerospace industries because of its excellent strength/weight ratio and corrosion resistance. However, its applications at high temperatures are vulnerable due to its high affinity for interstitial elements, such as nitrogen and oxygen. The plasma immersion ion implantation (PIII) technique, performed at high temperature, allows formation of modified layers that can improve the mechanical and tribological properties without compromising the corrosion resistance, which is a characteristic of this alloy. In this work, the samples were treated by PIII at three different temperatures (700, 800, and 900 °C) for 120 min of exposure to evaluate PIII on the mechanical behavior of Ti-6Al-4V alloy compared to data already available in the literature. The aim of this process is to improve surface mechanical properties of the Ti-6Al-4V alloy. The techniques used in this work were x-ray diffraction microhardness, glow discharge optical emission spectrometer, and wear testing in a ball-on-disk tribometer. The results indicate a significantly increased material resistance, with a reduced wear for all treated samples and a reduced friction coefficient for samples treated at 800 and 900 °C. The best results were for alloy treated at 800 and 900 °C, because they maintain the low coefficient throughout the test, which indicates better wear resistance.

5 February 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RDRegiane Gordia Drabeski
Regiane Gordia Drabeski
Daniele DiasDaniele Dias
Daniele Dias
RCRafael Fillus Chuproski
Rafael Fillus Chuproski
IRIsabel Borges da Rocha
Isabel Borges da Rocha
APAnderson Geraldo Marenda Pukasiewicz
Anderson Geraldo Marenda Pukasiewicz
GSGelson B. De Souza
Gelson B. De Souza
The growing need to utilize superalloys in challenging environments is driving ongoing advancements in effective coating systems. Within this framework, plasma nitriding can be evaluated as either a standalone solution or integrated with other methods. Applied to nickel-based Hastelloy X alloy, this surface processing represents an original aspect of the research, providing comprehensive analysis through compositional (via EDS), structural (XRD and micro-Raman), and microstructural (SEM) characterizations of both the surface and bulk material. Nitrogen diffusion and retention in the lattice compete with chromium depletion, resulting in various layer thicknesses (6.5 μm to 3.2 μm) and structures depending on the treatment temperatures: mainly expanded austenite γN at 400 °C; nitride phases (notably CrN, Cr2N) atop γN at 600 °C; and predominantly nitrides at 700 °C. Heat-induced carbide precipitation in the bulk has a limited impact on mechanical properties. Accordingly, the hardness-to-elastic modulus ratio ([[EQUATION]]), measured by nanoindentation, increases by a factor of 5.1 at the 400 ºC condition and 2.8 in the 700 ºC one. The unique features of the nitrided layers notably influence the material´s thermal diffusivity, determined by using the rear photoacoustic signal technique (sensitive to micrometer-scale layer contributions), achieving up to a 2.4-fold enhancement at 700 ºC. These findings indicate that plasma nitriding enables the tailoring of mechanically resistant surfaces with distinctive thermal properties on Hatelloy X.