In this study, a series of nuclear magnetic resonance (NMR) tests was conducted on calcareous sand, quartz sand, and glass bead with a wide range of grain sizes, to understand the effect of grain size on the micro-pore structure and fractal characteristics of the carbonate-based sand and silicate-based sand. The pore size distribution (PSD) of the tested materials were obtained from the NMR T₂ spectra, and fractal theory was introduced to describe the fractal properties of PSD. Results demonstrate that grain size has a significant effect on the PSD of carbonate-based sand and silicate-based sand. As grain size increases, the PSD of sands evolves from a binary structure with two peaks to a ternary structure with three peaks. The increase in the grain size can cause a remarkable increase in the maximum pore size. It is also found that the more irregular the particle shape, the better the continuity between the large and medium pores. In addition, grain size has a considerable effect on the fractal dimension of the micro-pore structure. The increase of grain size can lead to a significant increase in the heterogeneity and fractal dimension in PSD for calcareous sand, quartz sand and glass bead.

Crystalline admixtures (CAs) are new materials for promoting self-healing in concrete materials to repair concrete cracks. They have been applied to tunnel, reservoir dam, road, and bridge projects. The fundamental research and development of CAs are needed concerning their practical engineering applications. This paper reviews the current research progress of commercial CAs, including self-made CA healing cracks; the composition of CA; healing reaction mechanism; the composition of healing products; distribution characteristics of healing products; the influence of service environment and crack characteristics on the healing performance of CA; and coupling healing performance of CA with fiber, expansive agent, and superabsorbent polymers. The current research findings are summarized, and future research recommendations are provided to promote the development of high-performance cement matrix composites.

The major principal stress direction angle ( α_σ) experienced by granular soils varies widely in engineering, causing different strengths. However, how particle morphology affects the strength anisotropy behavior under different α_σ remains unclear. To address this gap, this study performed drained hollow cylinder torsional shear tests under different α_σ on six granular materials with distinct morphologies. Results highlight the significant dependence of peak strengths of granular materials on both particle morphology and α_σ. Increasing particle shape irregularity and surface roughness leads to a considerable enhancement in peak strength, while this peak strength significantly degrades with increasing α_σ. Materials with more irregular shapes were found to have a more pronounced strength anisotropy. Furthermore, the initial fabric of particle packings, derived from three-dimensional X-ray microtomography, was used to interpret microscopic mechanisms behind the morphology-dependent strength anisotropy. Irregular-shaped materials display broader preferred particle orientations and higher initial fabric anisotropy compared to relatively regular-shaped materials. This higher morphology-induced fabric anisotropy contributes to strength anisotropy, and a correlation was established for describing this trend. Additionally, an anisotropic failure criterion incorporating fabric anisotropy was developed to characterize the strength envelope for granular materials with diverse shapes.