Thibaut De Rességuier

Dr. Thibaut De Rességuier


Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2017 in Journal of Applied Physics
Verified
Journal Article
Closed access
TRThibaut De Rességuier
Thibaut De Rességuier
SHS. Hemery
S. Hemery
ELE. Lescoute
E. Lescoute
PVP. Villechaise
P. Villechaise
GKG. I. Kanel
G. I. Kanel
SRSergey Razorenov
Sergey Razorenov
As a major failure process in materials subjected to dynamic loading, spall fracture is one of the most widely studied issues in shock physics. To investigate its dependence on the microstructure, including both initial and shock-induced features, laser shock experiments were performed on single crystal magnesium. Shock loading was applied in directions parallel and perpendicular to the c-axis of the crystals. Both the spall strength and the fracture surface morphology are found to depend on the direction of the shock application with respect to crystal orientations. The results complement data obtained previously over ranges of lower strain rates. A detailed analysis of the residual microstructure and crack patterns in the recovered samples shows strong correlations between damage localization and twins, both pre-existing and shock-induced. Thus, cracks match specific twinning directions, which is discussed on the basis of deformation mechanisms reported under quasi-static loading conditions, either prismatic slip or twinning depending on local orientations.

10 August 2018 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
TRThibaut De Rességuier
Thibaut De Rességuier
GPG. Prudhomme
G. Prudhomme
CRC. Roland
C. Roland
EBE. Brambrink
E. Brambrink
DLD. Loison
D. Loison
ASA. Sollier
A. Sollier
Material ejection upon the breakout of a shock wave at a rough surface is a key safety issue for various applications, including pyrotechnics and inertial confinement fusion. For a few years, we have used laser driven compression to investigate microjetting from calibrated grooves in the free surface of shock-loaded specimens. Fast transverse optical shadowgraphy, time-resolved measurements of planar surface and jet tip velocities, and post-shock analysis of some recovered material have provided data over ranges of small spatial and temporal scales, short loading pulses (ns-order), and extremely high strain rates. In the new experiment reported here, picosecond laser irradiation of a thin copper wire generates an ultrashort x-ray burst which is used to radiograph the microjets expanding from plane wedged-shape grooves in tin and copper samples shock-loaded by a longer, nanosecond laser pulse. Such ultrafast radiography provides estimates of the density gradients along the jets and of the total ejected mass at different times after shock breakout. Furthermore, it reveals regions of low density inside the samples deep beneath the grooves, associated with subsurface damage due to tension induced by the interaction of rarefaction waves. Thus, combining this x-ray probe with our former experimental techniques provides a more complete insight into the physics of microjetting at very high loading rates and the ballistic properties of the resulting ejecta.

4 December 2012 in Physical Review B
Verified
Journal Article
Closed access
TRThibaut De Rességuier
Thibaut De Rességuier
ELE. Lescoute
E. Lescoute
DLD. Loison
D. Loison
Laser shock experiments have been performed on preheated iron samples to address the role of initial temperature on the elastic limit, wave propagation, and spall fracture in this metal over the temperature range 300\char21{}1000 K at very high expansion rates of the order of 3\ifmmode\times\else\texttimes\fi{}106 s$-${}1. Time-resolved measurements of the free-surface velocity indicate a slight, roughly linear decrease of the spall strength with increasing temperature, accompanied by a clear change from brittle to ductile fracture behavior evidenced from post-shot examination of the recovered samples. The results are discussed on the basis of simulations accounting for laser-matter interaction, pressure wave propagation, and subsequent polymorphic transformations throughout the sample thickness. Over the explored range of loading conditions, the occurrence of such transformations prior to spallation, which takes place near the free-surface under tensile loading after reversion to the $\alpha${} phase, does not seem to strongly affect dynamic fracture.

27 November 2023 in Physical Review B
Verified
Journal Article
Closed access
PDF file
NANourou Amadou
Nourou Amadou
TRThibaut De Rességuier
Thibaut De Rességuier
Nonequilibrium molecular dynamics simulations have been used to investigate phase transformations and plasticity in single-crystal iron from shock compression to dynamic tension and subsequent spall fracture. In consistence with experimental observations, the unloading wave following the compression front is found to evolve into a rarefaction shock at the reverse hexagonal-close-packed to body-centered-cubic (bcc) phase transformation, and a pressure hysteresis between the direct and reverse phase transformations is evidenced. The interaction of this unloading wave with the rarefaction wave reflected from the sample free surface classically induces tension within the crystal, which is found to drive a bcc to face-centered-cubic (fcc) phase transformation in agreement with very recent experimental observation under subnanosecond laser shock loading. At the atomic scale, the mechanism governing this bcc to fcc phase transformation is consistent with a Bain transformation path. The spall fracture process is observed to occur through voids nucleation and growth either at favorable sites (twin boundaries, bcc-fcc grain boundaries after partial transformation) or within the defect-free fcc crystal (after full transformation). Thus, the spall strength increases with the fcc phase fraction near the plane of maximum tension. An amorphous microstructure is observed around the voids, likely due to significant heating upon severe plastic deformation, in consistence with experimental clues from the literature.

30 October 2014 in Metals
Verified
Journal Article
Open access
PDF file
TRThibaut De Rességuier
Thibaut De Rességuier
DLDidier Loison
Didier Loison
ADAndré Dragon
André Dragon
ELEmilien Lescoute
Emilien Lescoute
High pressure shock compression induces a large temperature increase due to the dissipation within the shock front. Hence, a solid sample subjected to intense shock loading can melt, partially or fully, either on compression or upon release from the shocked state. In particular, such melting is expected to be associated with specific damage and fragmentation processes following shock propagation. In this paper, we show that laser driven shock experiments can provide a procedure to investigate high pressure melting of metals at high strain rates, which is an issue of key interest for various engineering applications as well as for geophysics. After a short description of experimental and analytical tools, we briefly review some former results reported for tin, then we present more recent observations for aluminum and iron.

3 November 2010 in Physical Review B
Verified
Journal Article
Closed access
PDF file
GMGuillaume Morard
Guillaume Morard
TRThibaut De Rességuier
Thibaut De Rességuier
TVT. Vinci
T. Vinci
ABA. Benuzzi-Mounaix
A. Benuzzi-Mounaix
ELE. Lescoute
E. Lescoute
FGF. Guyot
F. Guyot
High-power laser shots were performed on 100−μm-thick iron foils, leading to shock loading pressures ranging from about 100 to 300 GPa. Free surface velocities were measured by interferometry. Ejected fragments recovered on polycarbonate shields were analyzed using scanning electron microscopy. Particle-size distributions were extracted from backscattered electrons images. These distributions, as well as the morphologies of fragments and the values of the tensile strength, change abruptly with increasing laser intensity. One-dimensional hydrodynamic simulations were performed in order to interpret these evolutions. By comparison with recent static measurements and calculations of the iron phase diagram, the BLF (Bushman, Lomonosov and Fortov) equation of state was inferred to provide more realistic predictions than SESAME 2150 at the highest pressures investigated. The calculated decompression paths show that spall fracturation took place in the solid state, either in α or in γ iron, this phase difference being the simplest hypothesis for explaining the changes observed in the fragmentation behavior.