Backfill mining is the most environmentally friendly mining method at present, which can effectively control the surface subsidence, improve the recovery rate, and has good social and economic benefits. The purpose of this study is to solve the environmental problems caused by solid waste, combined with the rich geographical advantages of aeolian sand in the Yushenfu mining area of China. The rheological properties of the aeolian sand-fly ash-based filling slurry with different fly ash content are studied by experiments, and the strength development law of the filling body under different age and fly ash content are studied from the macroscopic and microscopic points of view. The rheological experiments showed that the increase of the amount of fly ash has a significant effect on the thixotropy, plastic viscosity, and yield stress of the filling slurry. Additionally, rheological properties of aeolian sand-fly ash-based filling slurry conform to the Bingham model. With the increase of the amount of fly ash, the performance of the filling slurry has been significantly improved. Uniaxial test and scanning electron microscope observation showed that the influence of fly ash on the strength of the filling body was mainly reflected in the late stage of maintenance, but was not obvious in the middle stage. Fly ash particles mainly bear the role of “water reduction” and a physical filling effect, which makes the filling slurry thicker and the internal structure more closely spaced. The volcanic ash reaction of fly ash is lagging behind the hydration reaction of cement; the secondary product of the delayed reaction is filled in the pores of cement hydrates, which can greatly reduce the porosity of the backfill body and increase the later strength of the backfill body. It provides a guarantee for the safe replacement of coal pillars in the working face.

Fly ash–cement composite backfill slurry, prepared by partially replacing cement with fly ash, has been demonstrated to effectively reduce the mine backfill costs and carbon emissions associated with cement production. However, the use of fly ash often results in insufficient early and medium-term strength of the backfill material. To address the demand for high medium-term strength in backfill materials under continuous mining and backfilling conditions, this study developed a silica fume–fly ash–cement composite backfill slurry. The effects of varying silica fume contents on the slurry’s flowability, uniaxial compressive strength, microstructure, and pore characteristics were systematically investigated. The results showed that increasing the silica fume content significantly reduced the slurry’s flowability. However, at a silica fume content of 5%, the slurry achieved optimal medium-term strength, with a 14-day uniaxial compressive strength of 3.98 MPa, representing a 25% improvement compared to the control group. A microstructural analysis revealed that a moderate silica fume content promoted the formation of calcium silicate hydrate gel, filled micropores, and optimized the pore structure, thereby enhancing the overall strength and durability of the material. Conversely, an excessive silica fume content above 5% led to a marked decrease in both flowability and strength. Based on a comprehensive evaluation of silica fume’s effects on the flowability, strength, and microstructure, the optimal silica fume content was determined to be 5%. This study provides a theoretical basis and practical guidance for improving the efficiency of continuous mining and backfilling operations, and for designing high-performance backfill materials suitable for continuous mining and filling conditions.

During strip backfilling mining in coal mines, the backfilling material is the main support structure. Therefore, studying the pressure law of the backfilling material is essential for the safe and efficient mining of coal resources. Based on research into strip backfilling mining at working face number 3216 of the Shanghe Coal Mine, and to smooth transition of overlying strata loads to the backfilling material, this study proposes a three-stage strip backfilling mining method. Based on thin-plate theory, an elastic thin-plate model, a reasonable spacing of strip mining is constructed, and the reasonable mining parameters of “mining 7 m to retain 8 m” at working face number 3216 of the Shanghe Coal Mine are determined. The law of backfilling pressure in three-stage strip backfilling mining is studied through numerical simulation and physical simulation experiments. The results show that field measurement results are basically consistent with the experimental results and numerical simulation results. When three-stage strip backfilling mining is adopted, the stage-one backfilling material is the main bearing body to which the overlying rock load transfers smoothly and gradually, and the structure of the “overburden-coal pillar (or backfilling strip)” in the stope remains stable. In three-stage strip backfilling mining, the overlying rock load is ultimately transferred to the stage-one backfilling material, the stage-two backfilling material is the auxiliary bearing body, and the stage-three backfilling material mainly provides long-term stable lateral support for the stage-one backfilling material.