Mohd Fauzi Bin Zanil

Mr. Mohd Fauzi Bin Zanil


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 November 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Faisal AbnisaFaisal Abnisa
Faisal Abnisa
SSShafferina Dayana Anuar Sharuddin
Shafferina Dayana Anuar Sharuddin
MZMohd Fauzi Bin Zanil
Mohd Fauzi Bin Zanil
WDWan Mohd Ashri Wan Daud
Wan Mohd Ashri Wan Daud
T M Indra MahliaT M Indra Mahlia
T M Indra Mahlia
The conversion of plastic waste into fuel by pyrolysis has been recognized as a potential strategy for commercialization. The amount of plastic waste is basically different for each country which normally refers to non-recycled plastics data; consequently, the production target will also be different. This study attempted to build a model to predict fuel production from different non-recycled plastics data. The predictive model was developed via Levenberg-Marquardt approach in feed-forward neural networks model. The optimal number of hidden neurons was selected based on the lowest total of the mean square error. The proposed model was evaluated using the statistical analysis and graphical presentation for its accuracy and reliability. The results showed that the model was capable to predict product yields from pyrolysis of non-recycled plastics with high accuracy and the output values were strongly correlated with the values in literature.

1 April 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
MLM J Lau
M J Lau
MZMohd Fauzi Bin Zanil
Mohd Fauzi Bin Zanil
SCS Y Choong
S Y Choong
JTJ Tan
J Tan
Heat pump is a device which being used to transfer heat energy from one or more heat sources at low temperature to one or more heat sinks at high temperature simultaneously through pumping. The heat pump system used in swimming pool is an air –to-water heat pump that made up of four elements, which are evaporator, compressor, condenser and expansion valve. The overall efficiency of the heat pump in recovering the heat energy with the least of work done needed is defined as Coefficient of Performance (COP). A calculation software interface is designed using programming language of Visual Basic in Microsoft Visual Studio software to model, simulate the operation of heat pump product in actual industrial application and aid the optimization of heat pump system. The calculation software interface developed generates high accuracy COP value at 4.90, which has only 0.62% difference compared to actual COP of the heat pump product at 4.87. In order to optimize the performance of heat pump, the number of turns of outer and inner coil in condenser and the water flow rate pumped into the condenser are changed to maximize the COP within allowable cost increment. The COP is improved from 4.90 to 5.52, 5.13 and 6.89 based on each respective optimizations with cost increment controlled in between 0.5 to 2%. The final COP improved is obtained at 8.06 through combined optimization.

1 March 2020 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
MZMohd Fauzi Bin Zanil
Mohd Fauzi Bin Zanil
KLKIAT MOON LEE
KIAT MOON LEE
RARadin Diana R. Ahmad
Radin Diana R. Ahmad
SZSazalina Zakaria
Sazalina Zakaria
RRRaja Shazrin Shah Res
Raja Shazrin Shah Res
Machine learning can be a game-changer for a global warming prediction. About 75% global greenhouse gas (GHG) emissions cause by energy sector and this indicate a major concern to global warming community. In this study, non-supervisory machine learning technique has been used to predict the GHG effect relate to net calorific value based on intergovernmental panel on climate change (IPCC) standard. The study focuses on the characteristic of coal that is used in power generation sector and its chemical effluent that obtained from ultimate analysis (dried basis; Carbon, Hydrogen, Oxygen, Nitrogen, Sulphur and Ash) as gas emissions is concerned. The dataset shows, coal from different origin and type produce GHG emissions range approximately between 86.95 and 108.23 k-tonne CO2/TJ with the net calorific value of 19.77 to 27.17 MJ/kg-coal. While, for ultimate analysis, the percentage of Carbon, Hydrogen, Oxygen, Nitrogen, Sulphur and Ash are in the range of [65.05 – 73.3], [1.46 – 5.49], [1.2 – 19.06], [0.3 – 1.20] and [4.82 – 15.96] respectively. In this study, principal component analysis is used to screen the training dataset and feed forward structure from artificial neural networks are used which allows the trained model to determine the GHG emission factor based on the given input data. The network relative errors of year 2017 dataset were used to adjust the weight value and as a result, the networks give r-square of 0.91678, which subsequently the trained networks are simulated for GHG emissions prediction for year 2018 at accuracy of r-square 0.82191. Furthermore, the study also shows, they are significant effect from coal characteristic towards GHS emissions and study proposed an optimal solution to simultaneously maximise power generation (in net calorific value per consumption weight) and reducing GHG value (k-tonne CO2/TJ) of coal plant.