The Lu Dila hydropower station has a complex geologic structure, given that it has a larger fault scale, exhibits large dam-site orientation changes, and has a more developed fissure in the dam foundation and riverbed. The present study established a three-dimensional seepage-field model of the Lu Dila hydropower station to analyze the seepage field and assess the reasonability and effectiveness of the seepage-control measures. The free surface was determined by an iterative algorithm, and the drainage hole was simplified as a line to simulate the function of the drainage hole. The present study analyzed the seepage field under different conditions, with focus placed on assessing and demonstrating the reasonability and effectiveness of the dam foundation’s impervious curtain and the drainage system. The results indicate a relationship between the large seepage discharge and the construction quality of the upstream left-bank curtain, the dam foundation fissure, and the fault connectivity. Reasonable references and suggestions are offered for project operation. In addition, the simulation method of the drainage hole was proven to be effective.
20 February 2019 in International Journal of Civil Engineering
The concrete face of a rockfill dam is a long and thin slab structure, which is highly susceptible to fracture when subjected to the settlement of the dam. The study of the generation and propagation of cracks in the concrete face of rockfill dams is of great significance to dam construction and face crack prevention. In this study, the initiation and propagation of cracks in the concrete face of a rockfill dam are investigated using an extended finite element method (XFEM) and ABAQUS software for the Gongboxia concrete-face rockfill dam. A numerical model for this dam is established using a finite element method, and the face stress and deformation distributions are obtained. Based on the results, a numerical model is built to find the location where cracks are initiated in the face. The displacement of the entire model is treated as the equivalent displacement for the numerical model. XFEM is utilized throughout the modeling process to obtain the stress concentration, crack initiation, and crack propagation in the concrete face, and an analysis of crack initiation and propagation is conducted. Finally, the effects of the thickness of concrete covers and reinforcement layers on the stress intensity of crack tips are also discussed using the established numerical model, and techniques for controlling the fracturing of the concrete face have been proposed in this paper.
Mass concrete structures are prone to suffer temperature destruction during construction and operation because of their own mechanical properties and the role of cement hydration; therefore, the law of temperature field and temperature stress changes is crucial. This paper is based on the heat conduction theory and contact friction element theory under general external load. The heat conduction matrix, node thermal load vector, equivalent stiffness-constraint matrix and equivalent load vector of the contact friction element are each added to the whole heat conduction matrix, thermal load vector and total stiffness matrix, and the total load vector according to the finite element integration rule to establish the thermal-stress calculation model of the contact friction element. Combined with the Qi River inverted siphon project, this paper analyzed the temperature field and temperature stress using the three-dimensional finite element method, considering the changes of concrete thermodynamic parameters with age and the outside air temperature and other conditions, and obtained the distribution and variation in temperature field and temperature stress during the construction of an inverted siphon. The research results are of great significance for temperature control and crack prevention of inverted siphon structures. The thermal-stress calculation model of the contact friction element overcomes the limitations that it is difficult to use the current contact surface model to perform the temperature field simulation and further improves the application of the contact friction element model in the simulation of the temperature field and the temperature stress of mass concrete.