Drilling volumes should be increased in order to increase hydrocarbon production, but this is impossible without the usage of high-quality drilling tools made of modern structural materials. The study has to analyze the design, technological and operational methods to increase the performance of drilling tools made of various materials and has highlighted prospects of technological method applications. The scientific novelty of the study consists in the development of a new analytical model of PDC drill bit–well interaction. The developed model takes into account the drill bit manufacturing errors in the form of bit body–nipple axes misalignment on the drill bit strength. This result makes it possible to determine the permissible manufacturing errors to provide safe operation of the drill bit. It is established that there is an additional transverse force that presses the drill bit to the well wall in the rock due to manufacturing errors. It is determined that the magnitude of this clamping force can be significant. The material effect has been analyzed on additional clamping force. It is established that geometric imperfection of the drill bit causes the minimal effect for the elastic system of the pipe string, which includes a calibrator and is composed of drill pipes based on composite carbon fiber material, and the maximal effect—for steel drill pipes. Polycrystalline diamond compact (PDC) drill bit and well wall contact interaction during operation in non-standard mode is considered. Non-standard stresses are determined, and the strength of the blades is estimated for different values of drilling bit manufacturing error.

Phenomena occurring in the contact area between two mating bodies are characterised by high complexity and variability. Comparisons are usually made between parameters such as the coefficient of friction, friction force, wear and temperature in relation to time and friction path. Their correct measurement enables the proper evaluation of tribological properties of materials used in the friction pair. This paper concerns the measurements of basic tribological parameters in the friction of selected polymer composites. Knowing the tribological properties of these composite materials, it will be possible to create proper operating conditions for kinematic friction pairs. This study investigated the coefficients of friction, friction force and temperatures of six polymer composites: cast polyamide PA6 G with oil, PA6 G with MoS₂, polyoxymethylene POM with aluminium, polyethylene terephthalate PET with polytetrafluoroethylene PTFE, PTFE with bronze, and PTFE with graphite. The friction surface was also examined using an optical system and computer software for 3D measurements. As a result, PA6-G with oil was found to be the best choice as a composite material for thin sliding coatings.

The paper presents the results of an X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) study of chemical and phase composition of the friction surfaces Fe–Mn–C–B–Si–Ni–Cr hardfacing coatings. The alloy was used as a core mixture to produce flux-cored wire of 2.4 mm in diameter. The coating was deposited by gas metal arc welding using CO2 as a shielding gas. The tribological examination was conducted in a ball on disk system with a load of 20 N under dry friction conditions. A XPS were used to examine the structures on the friction surface and depend on depth 5, 10, 15, 20, 50, 100, 200, and 6000 nm. The segregation of C, B, and Si atoms was observed in the process of the friction. The presence of compounds such as oxides (B2O3, SiO2, Cr2O3), carbides (Fe3C, Cr7C3), and borides (FeB, Fe2B) was detected on the surface and in the subsurface layer of the Fe–Mn–C–B–Si–Ni–Cr coating. The formation of these structures increases the wear resistance of composite coatings.

Currently, drilling of directional oil and gas wells under complex technical-technological and mining-geological conditions requires the use of drill pipes made of various materials. In turn, to choose rational modes of strengthening drill pipes and drill string layouts, information on the contact forces and friction forces of the drill string pipes on boreholes is necessary. Drill pipe curved sections friction with boreholes and drill bit resistance moment changes are the main causes of uneven rotation of a drill string during rotary or combined drilling methods and the occurrence of parametric oscillations. To reduce the cost of mechanical energy for well wiring, it is necessary to take into account the “drill string–borehole rocks” force interaction to estimate the magnitude of the frictional forces and their influence on the technological parameters of the drilling process. To solve this problem, mathematical models of “conventionally vertical and inclined drill string sections–borehole” were built. Based on the industrial data, an analysis of the force interaction of a deformed drill string composed of pipes made of different materials (aluminum, titanium, steel) was carried out. Analytical dependences were obtained for determining the contact forces and friction of the pipes on boreholes. A numerical study of the change of these power factors depending on the depth of the well under conditions of intensive vibration loading was carried out. The amplitude values of these forces, the frequency of their change for good sections, as well as the places for the most rational installation of drill pipes in the layout of the drill string were estimated. It was established that the intensity of contact and friction forces for steel drill pipes is greater than for titanium or aluminum ones. It is shown that the greater impact of a solid steel string on contact forces and frictional forces compared to a layout with sections of titanium or aluminum pipes in the range of vibration frequencies of 8–22 Hz corresponds to a bit rotation frequency of 70–80 rpm. The practical application of the obtained research results will contribute to the improvement of technical and economic indicators of the well drilling process.

— The results of the tribotesting of polyamide composites dispersely filled with glass (PA6-L-CV30-1) and carbon (UPA-6130UV) fibers, which are promising for the production of metal-polymer...