Andrii Velychkovych

Dr. Andrii Velychkovych

Ivano-Frankivsk National Technical University of Oil and Gas
orcid

Research Focus & Metrics

Academic Career Length

33Years (1994-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
Oleg BazalukOleg Bazaluk
Oleg Bazaluk
Andrii VelychkovychAndrii Velychkovych
Andrii Velychkovych
Liubomyr RopyakLiubomyr Ropyak
Liubomyr Ropyak
MPMykhaylo Pashechko
Mykhaylo Pashechko
TPTetiana Pryhorovska
Tetiana Pryhorovska
Vasyl LozynskyiVasyl Lozynskyi
Vasyl Lozynskyi
Drilling volumes should be increased in order to increase hydrocarbon production, but this is impossible without the usage of high-quality drilling tools made of modern structural materials. The study has to analyze the design, technological and operational methods to increase the performance of drilling tools made of various materials and has highlighted prospects of technological method applications. The scientific novelty of the study consists in the development of a new analytical model of PDC drill bit–well interaction. The developed model takes into account the drill bit manufacturing errors in the form of bit body–nipple axes misalignment on the drill bit strength. This result makes it possible to determine the permissible manufacturing errors to provide safe operation of the drill bit. It is established that there is an additional transverse force that presses the drill bit to the well wall in the rock due to manufacturing errors. It is determined that the magnitude of this clamping force can be significant. The material effect has been analyzed on additional clamping force. It is established that geometric imperfection of the drill bit causes the minimal effect for the elastic system of the pipe string, which includes a calibrator and is composed of drill pipes based on composite carbon fiber material, and the maximal effect—for steel drill pipes. Polycrystalline diamond compact (PDC) drill bit and well wall contact interaction during operation in non-standard mode is considered. Non-standard stresses are determined, and the strength of the blades is estimated for different values of drilling bit manufacturing error.

10 January 2023 in Ceramics
Verified
Journal Article
Open access
PDF file
Liubomyr RopyakLiubomyr Ropyak
Liubomyr Ropyak
TSThaer Abdulwahhab Shihab
Thaer Abdulwahhab Shihab
Andrii VelychkovychAndrii Velychkovych
Andrii Velychkovych
VBVitalii Bilinskyi
Vitalii Bilinskyi
VMVolodymyr Malinin
Volodymyr Malinin
MRMykola Romaniv
Mykola Romaniv
The prospects of plasma electrolytic oxidation (PEO) technology applied for surface hardening of aluminum alloys are substantiated. The work aims to optimize the technological process of PEO for aluminum in flowing electrolyte. The design of the equipment and the technological process of the PEO for aluminum deformed alloy D16T in flowing silicate–alkaline electrolyte have been developed. Oxide coatings were formed according to various technological parameters of the PEO process. The properties of the oxide coatings were evaluated, respectively, by measurements of coating thickness, geometric dimensions of the samples, microhardness, wear tests, and optical and scanning electron microscopy. To study the influence of the technological parameters of the PEO process of forming oxide coatings on geometrical, physical, and mechanical properties, planning of the experiment was used. According to the results of the conducted experiments, a regression equation of the second order was obtained and the response surfaces were constructed. We determined the optimal values of the technological parameters of the PEO process: component concentration ratio (Na2SiO3/KOH), current density, flow rate, and electrolyte temperature, which provide the oxide coating with minimal wear and sufficiently high physical and mechanical properties and indicators of the accuracy of the shape of the parts. The research results showed that the properties of oxide coatings mainly depend on almost all constituent modes of the PEO process. Samples with Al2O3 oxide coating were tested during dry friction according to the “ring–ring” scheme. It was established that the temperature in the friction zone of aluminum samples with an oxide coating is lower compared to steel samples without a coating, and this indicates high frictional heat resistance of the oxide coating.

9 August 2024 in Vibration
Verified
Journal Article
Open access
PDF file
SLSerhii Landar
Serhii Landar
Andrii VelychkovychAndrii Velychkovych
Andrii Velychkovych
Liubomyr RopyakLiubomyr Ropyak
Liubomyr Ropyak
AAAndriy Andrusyak
Andriy Andrusyak
Optimization of drilling processes for oil and gas and geothermal wells requires the effective use of mechanical energy for the destruction of rocks. When constructing a well, an important indicator of the drilling stage is the mechanical speed. Therefore, when performing drilling operations, operators usually use blade bits of an aggressive design and often use forced drilling modes. Drill bits under forced operation modes generate a wide range of vibrations in the drilling tools; in turn, a drill string, being a long-dimensional deformable body, causes the development, amplification, and interconnection of vibrations of different types. Vibration loads reduce the technical and economic indicators of drilling, with destructive effects on drill string elements, and cause complications and emergencies. The authors initiated the creation of an informational and analytical database on emergency situations that occurred as a result of excessive vibrations of the drill string during the construction of deep wells in the deposits of the Dnipro–Donetsk Basin. For the first time, the suitability and effectiveness of using the Smart 4 controller (“Innova Power Solutions”, Calgary, Canada) for monitoring the vibration load of the drilling tool was tested in industrial conditions, while the controller was used as a separate element in the drill string. A special module was developed for the reliable installation of the Smart 4 controller, with a power battery in the layout of the lower part of the drill string. During the testing of the proposed device for measuring vibrations in the process of drilling an inclined well, verification of the registered data was carried out with the help of a high-cost telemetry system. The implementation of the proposed innovation will allow each operator to assess the significance of the impact of vibrations and shocks on the production process and, if necessary, adjust the drilling modes or apply vibration protection devices. In addition, service departments that operate and repair drilling equipment will be able to obtain an evidence base for resolving warranty disputes or claims.

13 June 2021 in Energies
Verified
Journal Article
Open access
PDF file
Oleg BazalukOleg Bazaluk
Oleg Bazaluk
Orest SlabyjOrest Slabyj
Orest Slabyj
VVVasyl Vekeryk
Vasyl Vekeryk
Andrii VelychkovychAndrii Velychkovych
Andrii Velychkovych
Liubomyr RopyakLiubomyr Ropyak
Liubomyr Ropyak
Vasyl LozynskyiVasyl Lozynskyi
Vasyl Lozynskyi
The paper proposes a new technology for fluid production intensification, in particular hydrocarbons, which is implemented via significant increasing of the local wellbore diameter in the interval, where the productive stratum is present. The proposed technology improves the well productivity by increasing the filtration surface area and opening new channels for filtering fluids into the well. The innovative, technical idea is to drill large diameter circular recesses in planes perpendicular to the well axis. After that, the rock mass located between the circular recesses are destroyed by applying static or dynamic axial loads. The required value of the axial force is provided by the weight of the standard drilling tool. As a result of the study, the analytical relations to specify the admissible radius of circular recesses and admissible thickness of rock mass between two adjacent circular recesses from the condition of safe operation are obtained. The numerical analysis carried out for typical reservoir rocks substantiated the possibility of well diameter local reaming twenty times. A special tool for circular recess drilling is developed and the principle of its operation is described. The advantage of the proposed approaches is the low energy consumption for well diameter reaming. Our technology will have special economic expediency for the intensification of production from hydrodynamically imperfect wells and under the condition of fluid filtration according to the expressed nonlinear law.

3 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
Maciej DutkiewiczMaciej Dutkiewicz
Maciej Dutkiewicz
Andrii VelychkovychAndrii Velychkovych
Andrii Velychkovych
ISIvan Shatskyi
Ivan Shatskyi
VSVasyl Shopa
Vasyl Shopa
The results of a study of the contact interaction of an open shell and a chrome-plated shaft with elastomeric filler installed coaxially are presented. The considered contact system is a model of the original design of the shell damper of dry friction. The design feature is the following: the bearing link of the damper is a thin-walled cylindrical shell with a cut along the generatrix; the working body of the damper is elastomeric filler; a hollow chrome-plated shaft centers the damper elements and allows it to be used in technological processes with the presence of aggressive and abrasive-containing media. The mechanical-mathematical modeling of the behavior of the presented damper under the conditions of operational loads has been carried out. The idea of identifying the properties of a cut isotropic shell, which bends under the conditions of a nonaxisymmetric contact load, and a strongly orthotropic continuous shell is applied. As a result, dependences were obtained to determine the rigidity and the maximum allowable load of the damper. The effect of the coefficient of friction of the contact pairs elastomer-shell and elastomer-shaft on the damper performance properties has been studied. A technique for the quasi-static analysis of structural damping in non-mobile, non-conservative shell systems with deforming filler has been developed. The hysteresis loops of the damper under a nonmonotonic load are constructed, the dependence of the amount of dissipated energy on the cycle asymmetry coefficient is found. An analysis of the results obtained showed that the use of open shells in friction shock absorbers can significantly reduce their rigidity compared to solid shells and thereby reduce the resonant frequencies of the dynamic system. This circumstance makes such vibration isolators particularly attractive for use in superresonance vibrators as working modules of drilling shock absorbers and elastic hangers of sucker rods in oil and gas production.

12 November 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Maciej DutkiewiczMaciej Dutkiewicz
Maciej Dutkiewicz
TDTaras Dalyak
Taras Dalyak
ISIvan Shatskyi
Ivan Shatskyi
TVTetyana Venhrynyuk
Tetyana Venhrynyuk
Andrii VelychkovychAndrii Velychkovych
Andrii Velychkovych
This paper studied the distribution of stresses near damage in the form of axial surface cracks in a pipeline reinforced with a spiral-wound composite coating. The authors applied the homogenization method to determine the effective elastic characteristics of a structurally anisotropic layered package. By means of the classical momentless theory of shells, it was established that the stress state of the coated intact pipe under the pressure of the pumped product depends on the parameters of the geometry of the capacity strip, as well as on the component composition of the heterogeneous coating. The finite element method was applied to solve the problem of plane deformation of a piecewise homogeneous ring with an internal crack perpendicular to the interface. This problem assumes the linearity of the materials and the ideal mechanical contact with the layers. The effect of the composite coating and the size of the damage on the magnitudes of the energy flow into the crack tip, and on the stress intensity factor, was studied in detail. Various variants of the coating were considered, namely, winding of the coating on an unloaded pipe and reinforcement of the pipe under repair pressure.