For realizing neural networks with binary memristor crossbars, memristors should be programmed by high-resistance state (HRS) and low-resistance state (LRS), according to the training algorithms like backpropagation. Unfortunately, it takes a very long time and consumes a large amount of power in training the memristor crossbar, because the program-verify scheme of memristor-programming is based on the incremental programming pulses, where many programming and verifying pulses are repeated until the target conductance. Thus, this reduces the programming time and power is very essential for energy-efficient and fast training of memristor networks. In this paper, we compared four different programming schemes, which are F-F, C-F, F-C, and C-C, respectively. C-C means both HRS and LRS are coarse-programmed. C-F has the coarse-programmed HRS and fine LRS, respectively. F-C is vice versa of C-F. In F-F, both HRS and LRS are fine-programmed. Comparing the error-energy products among the four schemes, C-F shows the minimum error with the minimum energy consumption. The asymmetrical coarse HRS and fine LRS can reduce the time and energy during the crossbar training significantly, because only LRS is fine-programmed. Moreover, the asymmetrical C-F can maintain the network’s error as small as F-F, which is due to the coarse-programmed HRS that slightly degrades the error.

Hierarchical Temporal Memory (HTM) has been known as a software framework to model the brain’s neocortical operation. However, mimicking the brain’s neocortical operation by not software but hardware is more desirable, because the hardware can not only describe the neocortical operation, but can also employ the brain’s architectural advantages. To develop a hybrid circuit of memristor and Complementary Metal-Oxide-Semiconductor (CMOS) for realizing HTM’s spatial pooler (SP) by hardware, memristor defects such as stuck-at-faults and variations should be considered. For solving the defect problem, we first show that the boost-factor adjustment can make HTM’s SP defect-tolerant, because the false activation of defective columns are suppressed. Second, we propose a memristor-CMOS hybrid circuit with the boost-factor adjustment to realize this defect-tolerant SP by hardware. The proposed circuit does not rely on the conventional defect-aware mapping scheme, which cannot avoid the false activation of defective columns. For the Modified subset of National Institute of Standards and Technology (MNIST) vectors, the boost-factor adjusted crossbar with defects = 10% shows a rate loss of only ~0.6%, compared to the ideal crossbar with defects = 0%. On the contrary, the defect-aware mapping without the boost-factor adjustment demonstrates a significant rate loss of ~21.0%. The energy overhead of the boost-factor adjustment is only ~0.05% of the programming energy of memristor synapse crossbar.

A real memristor crossbar has defects, which should be considered during the retraining time after the pre-training of the crossbar. For retraining the crossbar with defects, memristors should be updated with the weights that are calculated by the back-propagation algorithm. Unfortunately, programming the memristors takes a very long time and consumes a large amount of power, because of the incremental behavior of memristor’s program-verify scheme for the fine-tuning of memristor’s conductance. To reduce the programming time and power, the partial gating scheme is proposed here to realize the partial training, where only some part of neurons are trained, which are more responsible in the recognition error. By retraining the part, rather than the entire crossbar, the programming time and power of memristor crossbar can be significantly reduced. The proposed scheme has been verified by CADENCE circuit simulation with the real memristor’s Verilog-A model. When compared to retraining the entire crossbar, the loss of recognition rate of the partial gating scheme has been estimated only as small as 2.5% and 2.9%, for the MNIST and CIFAR-10 datasets, respectively. However, the programming time and power can be saved by 86% and 89.5% than the 100% retraining, respectively.

In this paper, we propose a new time-shared twin memristor crossbar for pattern-recognition applications. By sharing two memristor arrays at different time, the number of memristor arrays can be reduced by half, saving the crossbar area by half, too. To implement the time-shared twin memristor crossbar, we also propose CMOS time-shared subtractor circuit, in this paper. The operation of the time-shared twin memristor crossbar is verified using 3 × 3 memristor array which is made of aluminum film and carbon fiber. Here, the crossbar array is programmed to store three different patterns. When we apply three different input vectors to the array, we can verify that the input vectors are well recognized by the proposed crossbar. Moreover, the proposed crossbar is tested for the recognition of complicated gray-scale images. Here, 10 images with 32 × 32 pixels are applied to the proposed crossbar. The simulation result verifies that the input images are recognized well by the proposed crossbar, even though the noise level of each image is varied from −10 to +10 dB.

As a software framework, Hierarchical Temporal Memory (HTM) has been developed to perform the brain’s neocortical functions, such as spatial and temporal pooling. However, it should be realized with hardware not software not only to mimic the neocortical function but also to exploit its architectural benefit. To do so, we propose a new memristor-CMOS (Complementary Metal-Oxide-Semiconductor) hybrid circuit of temporal-pooling here, which is composed of the input-layer and output-layer neurons mimicking the neocortex. In the hybrid circuit, the input-layer neurons have the proximal and basal/distal dendrites to combine sensory information with the temporal/location information from the brain’s hippocampus. Using the same crossbar architecture, the output-layer neurons can perform a prediction by integrating the temporal information on the basal/distal dendrites. For training the proposed circuit, we used only simple Hebbian learning, not the complicated backpropagation algorithm. Due to the simple hardware of Hebbian learning, the proposed hybrid circuit can be very suitable to online learning. The proposed memristor-CMOS hybrid circuit has been verified by the circuit simulation using the real memristor model. The proposed circuit has been verified to predict both the ordinal and out-of-order sequences. In addition, the proposed circuit has been tested with the external noise and memristance variation.

Static random-access memory (SRAM) technology is utilized in designing cache memory to enhance the processing performance of computer systems. The sense amplifier (SA) circuit, a crucial component of memory design, significantly impacts data access time and power consumption. In comparison to conventional differential sense amplifiers (DSA) designs, latch-based sense amplifiers (LSA) used in memory-based computing platforms have specific requirements, including robust noise resistance in harsh working environments and low power consumption, particularly for internet of thing (IoT) embedded computing applications. However, the performance can be degraded due to various factors that arise during the layout, such as conductor resistance or the development of parasitic capacitance. Therefore, this study employs low-voltage 22 nm UMC CMOS technology for LSA design layout and analyzes the factors influencing design performance post-layout process. Layout design optimization techniques are applied to mitigate the impact of parasitic capacitance on important signal lines such as data line/data line bar (DLL/DLLB). Based on the performance analysis results, it is possible to achieve a reduction in power consumption of up to 15% and a 5% decrease in read delay time by implementing circuit layout LSA design optimization techniques.