The most efficient way to create novel materials that may be used in a variety of optoelectronic applications is thought to be doped mixed polymers with appropriate fillers. Undoped and doped PVC polymers with ZnS/Mn formed at different temperatures were fabricated using the casting method. The Rietveld method was used to discover the structure and microstructure of Zn0.95Mn0.05S prepared at T = 300, 400, and 500 °C. The distribution and existence of the nanofiller over the PVC matrix were determined via XRD, FTIR, EDS, and SEM techniques. The effect of the preparation temperatures of the ZnS/Mn nanofiller on the absorption, transmittance, reflectance, refractive index, extinction coefficient, dielectric constant, AC conductivity, electrical modulus, and DC conductivity activation energy data of the PVC polymer was studied using the diffused reflectance technique. Doping PVC with ZnS/Mn (prepared at 300 °C) lowered the direct and indirect optical band gaps from 5.4 and 4.52 eV to minimum values of 4.55 and 3.63 eV. The fluorescence intensity of pure PVC is greatly enhanced upon loading with ZnS/Mn. The PVC exhibited two near UV peaks, one violet and one blue color, while, in addition, the doped polymers exhibited green and orange colors. The corresponding CIE diagram for all the samples was also determined.
The 70% polyvinyl alcohol/30% polyvinyl pyrrolidone (PVA/PVP) polymer blends, with different weight ratios of tetrapropylammonium iodide (TPAI) or tetrahexylammonium iodide (THAI) salt, were prepared using dimethyl sulfoxide (DMSO) as a solvent. The X-ray diffraction technique was used to trace the crystalline nature of the formed blends. The SEM and EDS techniques were applied to figure out the morphology of the blends. The variation in the FTIR vibrational bands was used to investigate the chemical composition and the effect of different salt doping on the functional groups of the host blend. The influence of the salt type (TPAI or THAI) and its ratio on the linear and nonlinear optical parameters for the doped blends were investigated in detail. Absorbance and reflectance are highly enhanced in the UV region reaching a maximum for the blend with 24% TPAI or THAI; so, it can be employed as shielding materials for UVA and UVB types. The direct (5.1 eV) and indirect (4.8 eV) optical bandgaps were reduced continuously to (3.52, 3.63 eV) and (3.45, 3.51 eV) while increasing the content of TPAI or THAI, respectively. The blend doped with 24% wt TPAI exhibited the highest refractive index (around 3.5 in 400–800 nm). The DC conductivity is affected by the content and type of salt, its dispersion, and blend-salt interaction. The activation energies of different blends were obtained by applying the Arrhenius formula.
9 September 2023 in Optical and Quantum Electronics
Undoped and doped polyvinyl pyrrolidone/ carboxymethyl cellulose (PVP/CMC: 50/50%) blended polymers with melanin were formed. X-ray diffraction analysis confirmed the amorphous nature of all blends. Scanning electron microscopy results confirmed the smooth and homogeneous surface of the undoped and doped PVP/CMC blend with melanin. The optical parameters and fluorescence spectra of the PVP/CMC blend were investigated as functions of melanin content. The direct optical band gap (Eg) for the used melanin is 2.86 eV. The direct and indirect Eg values for the PVP/CMC blend are 5.1 and (4.9, 3.2) eV, respectively. The direct and indirect Eg values were reduced to (4.5, 3.23) and (2.2, 1.33) eV as the amount of melanin became 3 wt % in the doped blend. The effect of melanin doping on the dielectric constant, dielectric loss, AC conductivity, complex impedance, Nyquist plot of the complex impedance, and electric modulus of the PVP/CMC blend was also studied.