Cyanobacterial water blooms represent toxicological, ecological and technological problems around the globe. When present in raw water used for drinking water production, one of the best strategies is to remove the cyanobacterial biomass gently before treatment, avoiding cell destruction and cyanotoxins release. This paper presents a new method for the removal of cyanobacterial biomass during drinking water pre-treatment that combines hydrodynamic cavitation with cold plasma discharge. Cavitation produces press stress that causes Microcystis gas vesicles to collapse. The cyanobacteria then sink, allowing for removal by sedimentation. The cyanobacteria showed no signs of revitalisation, even after seven days under optimal conditions with nutrient enrichment, as photosynthetic activity is negatively affected by hydrogen peroxide produced by plasma burnt in the cavitation cloud. Using this method, cyanobacteria can be removed in a single treatment, with no increase in microcystin concentration. This novel technology appears to be highly promising for continual treatment of raw water inflow in drinking water treatment plants and will also be of interest to those wishing to treat surface waters without the use of algaecides.

Solid particles (SP) suspended in water represent a common contamination that degrades the water quality, not only in drinking water sources. Particles differ in size, nature, and related features like surface charge. Thus, various methods can be utilized for their removal—physical approaches including settling or filtration, chemical coagulation/flocculation, biological microbial degradation, and others. This paper aims to summarize currently available methods for SP removal with special attention devoted to alternative, cost-effective, sustainable, and eco-friendly approaches with low energetic demands where the power of renewable energy sources can be utilized. Besides SP properties, the selection of the proper method (or a sequence of methods) for their separation also depends on the purpose of water treatment. Drinking water production demands technologies with immediate effect and high throughputs, like conventional filtration and coagulation/flocculation (electro- or chemical with alternative coagulant/flocculant agents) or some hybrid approaches to ensure quick and cost-effective decontamination. Such technologies usually imply heavy machinery with high electricity consumption, but current progress allows the construction of smaller facilities powered by solar or wind power plant systems. On the other hand, water decontamination in rivers or ponds can include slower processes based on phytoremediation, being long-term sustainable with minimal energy and cost investments.

Efficient treatment of contaminated water in industrially viable volumes is still a challenging task. The hydrodynamic cavitation plasma jet (HCPJ) is a promising plasma source for industrial-scale generation of biologically active environments at high flow rates of several m³/h. The combined effect of a hydro-mechanical phenomenon consisting of hydrodynamic cavitation and electrical discharge in cavitation voids was found to be highly efficient for large-volume generation of reactive oxygen species, ultraviolet (UV) radiation, and electro-mechanical stress in a liquid environment. Here, the persistence of biocidal properties of HCPJ-activated water (i.e., plasma-activated water (PAW)) was tested by the study of algae and cyanobacteria inactivation. Algae and cyanobacteria cultivated in media containing PAW (1:1) were completely inactivated after 72 h from first exposure. The test was performed at a total power input of up to 0.5 kWh/m³ at the treated liquid flow rate of 1 m³/h. A beneficial modification of our previous HCPJ design is described and thoroughly characterized with respect to the changes of hydrodynamic flow conditions as well as discharge performance and its optical characteristics. The modification proved to provide high biocidal activity of the resulting PAW, which confirms a strong potential for further design optimization of this promising water (liquid) plasma source.