Cyanobacterial water blooms represent toxicological, ecological and technological problems around the globe. When present in raw water used for drinking water production, one of the best strategies is to remove the cyanobacterial biomass gently before treatment, avoiding cell destruction and cyanotoxins release. This paper presents a new method for the removal of cyanobacterial biomass during drinking water pre-treatment that combines hydrodynamic cavitation with cold plasma discharge. Cavitation produces press stress that causes Microcystis gas vesicles to collapse. The cyanobacteria then sink, allowing for removal by sedimentation. The cyanobacteria showed no signs of revitalisation, even after seven days under optimal conditions with nutrient enrichment, as photosynthetic activity is negatively affected by hydrogen peroxide produced by plasma burnt in the cavitation cloud. Using this method, cyanobacteria can be removed in a single treatment, with no increase in microcystin concentration. This novel technology appears to be highly promising for continual treatment of raw water inflow in drinking water treatment plants and will also be of interest to those wishing to treat surface waters without the use of algaecides.

The swirling flow exiting the runner of a hydraulic turbine is further decelerated in the discharge cone of the draft tube to convert the excess of dynamic pressure into static pressure. When the turbine is operated far from the best efficiency regime, particularly at part load, the decelerated swirling flow develops a self-induced instability with a precessing helical vortex and the associated severe pressure fluctuations. This phenomenon is investigated numerically in this paper, for a swirl apparatus configuration. The unsteady three-dimensional (3D) flow field is analyzed using a proper orthogonal decomposition (POD), and within this framework we examine the effectiveness of an axial jet injection for mitigating the flow instability. It is shown that a limited number of modes can be used to reconstruct the flow field. Moreover, POD enables to reveal influence of the jet injection on the individual modes of the flow and illustrates continuous suppression of the modes from higher-order modes to lower-order modes as the jet discharge increases. Application of POD offers new view for the future control effort aimed on vortex rope mitigation because spatiotemporal description of the flow is provided. Thereby, POD enables better focus of the jets or other flow control devices.

Efficient treatment of contaminated water in industrially viable volumes is still a challenging task. The hydrodynamic cavitation plasma jet (HCPJ) is a promising plasma source for industrial-scale generation of biologically active environments at high flow rates of several m³/h. The combined effect of a hydro-mechanical phenomenon consisting of hydrodynamic cavitation and electrical discharge in cavitation voids was found to be highly efficient for large-volume generation of reactive oxygen species, ultraviolet (UV) radiation, and electro-mechanical stress in a liquid environment. Here, the persistence of biocidal properties of HCPJ-activated water (i.e., plasma-activated water (PAW)) was tested by the study of algae and cyanobacteria inactivation. Algae and cyanobacteria cultivated in media containing PAW (1:1) were completely inactivated after 72 h from first exposure. The test was performed at a total power input of up to 0.5 kWh/m³ at the treated liquid flow rate of 1 m³/h. A beneficial modification of our previous HCPJ design is described and thoroughly characterized with respect to the changes of hydrodynamic flow conditions as well as discharge performance and its optical characteristics. The modification proved to provide high biocidal activity of the resulting PAW, which confirms a strong potential for further design optimization of this promising water (liquid) plasma source.

Hydrodynamic cavitation represents complex physical phenomenon undesirably affecting operation as well as lifespan of many hydraulic machines from small valves to the large hydro power plants. On the other hand, the same phenomenon and its concomitants such as pressure pulsations can be exploited in many positive ways. One of them which seems to be very promising and perspective is the cavitation utilization for reduction of the microorganisms such as cyanobacteria within large bulks of water. Mutual effect of the swirl induced by the upstream mounted generator and flow constriction in converging–diverging nozzle has been experimentally investigated. The analysis of the hydraulic losses in the wide range of the cavitation regimes has been done as well as the investigation of the pipe wall acceleration induced by the fluctuations of the cavitating structures. The dynamics of the cavitation was studied using the proper orthogonal decomposition (POD) of the captured video records. The main scope of this paper is numerical investigation complementing the experimental results. The multiphase simulations were carried out using the OpenFOAM 1606+ and its interPhaseChangeFoam solver. The present study focuses on computational fluid dynamics results of the cavitating velocity field within the nozzle and analysis of the loss coefficient within the nozzle. The results of the numerical analysis were utilized for the further discussion of the experimental results.