Precisely evaluating the systematic error induced by the quadratic Zeeman effect is important for developing atom interferometer gravimeters aiming at an accuracy in the regime (). This paper reports on the experimental investigation of Raman spectroscopy-based magnetic field measurements and the evaluation of the systematic error in the gravimetric atom interferometer (GAIN) due to quadratic Zeeman effect. We discuss Raman duration and frequency step-size-dependent magnetic field measurement uncertainty, present vector light shift and tensor light shift induced magnetic field measurement offset, and map the absolute magnetic field inside the interferometer chamber of GAIN with an uncertainty of 0.72 nT and a spatial resolution of 12.8 mm. We evaluate the quadratic Zeeman-effect-induced gravity measurement error in GAIN as . The methods shown in this paper are important for precisely mapping the absolute magnetic field in vacuum and reducing the quadratic Zeeman-effect-induced systematic error in Raman transition-based precision measurements, such as atomic interferometer gravimeters.
15 December 2016 in The European Physical Journal D
We present the derivation of the frequency-dependent scalar, vector, and tensor dynamical polarizabilities for the two hyperfine levels of the atom ground state. Based on the characterization of the dynamical polarizabilities, we analyze and measure the differential vector and tensor light shift between the ground-state sublevels with near-resonant, stimulated Raman transitions. These results clarify that the tensor polarizabilities for the ground states of alkali atoms are absent when the light field is far detuned from the atomic resonance and the total electronic angular momentum is a good quantum number. In the near-resonant case, the light shifts are nontrivial and the determination of the frequency-dependent vector and tensor dynamic polarizabilities will help to achieve higher fidelities for applications of neutral atoms in quantum information and precision measurements.
We present a compact, low-noise, and inexpensive optical phase-lock loop (OPLL) system to synchronize the frequency and the phase between two external cavity diode lasers. Based on a direct digital synthesizer technique, a programmable radio-frequency generator is implemented as the reference signal source. The OPLL has a narrow beat note linewidth below 1 Hz and a residual mean-square phase error of 0.06 rad2 in a 10 MHz integration bandwidth. The experimental test results prove the competent performance of the system, which is promising as a low-budget choice in atomic physics applications.
In order to achieve accurate prediction of subsurface damage (SSD) in ultra-precision grinding of high-performance ultra-violet laser-irradiated fused silica optics, the paper combines damage precursor multimodal measurement technology with magnetorheological finishing spot method detection. Various methods such as photothermal weak absorption and fluorescence confocal imaging are used for measuring the surface roughness and subsurface damage depth of a series of fused silica samples prepared under different ultra-precision grinding parameters. The correlation between surface roughness and subsurface damage depth in ultra-precision grinding based on laser damage performance is established using curve fitting. The results indicate that there is a metamorphic layer below the subsurface crack layer, which can cause additional photothermal absorption. Subsurface damage is constituted of the subsurface crack layer and metamorphic layer. Under ultra-precision grinding conditions, the maximum depth of subsurface damage is generally 2.00–4.22 times the depth of the subsurface damage cluster. The roughness Ra and the subsurface damage cluster depth correspond to SSD(cluster) = 195 × Ra − 0.13. The maximum depth of subsurface damage can be predicted by measuring the Ra value, by which accurate prediction of defect depth in ultra-precision grinding and guiding the high-performance manufacturing of ultra-violet laser-irradiated fused silica optics can be achieved.