Shakhawat Hossain

Dr. Shakhawat Hossain

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
WRWasim Raza
Wasim Raza
SHShakhawat Hossain
Shakhawat Hossain
Kwang-Yong KimKwang-Yong Kim
Kwang-Yong Kim
A wide range of existing passive micromixers are reviewed, and quantitative analyses of ten typical passive micromixers were performed to compare their mixing indices, pressure drops, and mixing costs under the same axial length and flow conditions across a wide Reynolds number range of 0.01–120. The tested micromixers were selected from five types of micromixer designs. The analyses of flow and mixing were performed using continuity, Navier-Stokes and convection-diffusion equations. The results of the comparative analysis were presented for three different Reynolds number ranges: low-Re (Re ≤ 1), intermediate-Re (1 < Re ≤ 40), and high-Re (Re > 40) ranges, where the mixing mechanisms are different. The results show a two-dimensional micromixer of Tesla structure is recommended in the intermediate- and high-Re ranges, while two three-dimensional micromixers with two layers are recommended in the low-Re range due to their excellent mixing performance.

8 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Mosab KaseemMosab Kaseem
Mosab Kaseem
ZRZeeshan Ur Rehman
Zeeshan Ur Rehman
SHShakhawat Hossain
Shakhawat Hossain
ASAshish Kumar Singh
Ashish Kumar Singh
Burak DikiciBurak Dikici
Burak Dikici
Polylactic acid (PLA)/silica composites as multifunctional high-performance materials have been extensively examined in the past few years by virtue of their outstanding properties relative to neat PLA. The fabrication methods, such as melt-mixing, sol–gel, and in situ polymerization, as well as the surface functionalization of silica, used to improve the dispersion of silica in the polymer matrix are outlined. The rheological, thermal, mechanical, and biodegradation properties of PLA/silica nanocomposites are highlighted. The potential applications arising from the addition of silica nanoparticles into the PLA matrix are also described. Finally, we believe that a better understanding of the role of silica additive with current improvement strategies in the dispersion of this additive in the polymer matrix is the key for successful utilization of PLA/silica nanocomposites and to maximize their fit with industrial applications needs.

25 July 2021 in Metals
Verified
Journal Article
Open access
PDF file
TZTehseen Zehra
Tehseen Zehra
Mosab KaseemMosab Kaseem
Mosab Kaseem
SHShakhawat Hossain
Shakhawat Hossain
Young Gun KoYoung Gun Ko
Young Gun Ko
This work examined the influence of dual incorporation of MoO2 and SiO2 on the corrosion behavior of pure titanium treated via plasma electrolytic oxidation (PEO). To achieve this purpose, pure titanium substrate was treated via PEO in an alkaline-molybdate electrolyte without and with SiO2 nanoparticles. The microstructural observation revealed that the addition of SiO2 nanoparticles into the electrolyte during PEO helped to seal the structural defects in the PEO coating so that a rougher, thicker, and denser coating rich in SiO2 was successfully obtained. From the electrochemical measurements in a 3.5 wt.% NaCl solution, the TiO2-MoO2-SiO2 hybrid coating exhibited a higher corrosion resistance than the TiO2-MoO2 coating which was attributed to the sealing effect by stable SiO2 nanoparticles.

19 February 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Mosab KaseemMosab Kaseem
Mosab Kaseem
KRKarna Ramachandraiah
Karna Ramachandraiah
SHShakhawat Hossain
Shakhawat Hossain
Burak DikiciBurak Dikici
Burak Dikici
This review presents an overview of the recent developments in the synthesis of layered double hydroxide (LDH) on the anodized films of Mg alloys prepared by either conventional anodizing or plasma electrolytic oxidation (PEO) and the applications of the formed composite ceramics as smart chloride traps in corrosive environments. In this work, the main fabrication approaches including co-precipitation, in situ hydrothermal, and an anion exchange reaction are outlined. The unique structure of LDH nanocontainers enables them to intercalate several corrosion inhibitors and release them when required under the action of corrosion-relevant triggers. The influences of different variables, such as type of cations, the concentration of salts, pH, and temperature, immersion time during the formation of LDH/anodic film composites, on the electrochemical response are also highlighted. The correlation between the dissolution rate of PEO coating and the growth rate of the LDH film was discussed. The challenges and future development strategies of LDH/anodic films are also highlighted in terms of industrial applications of these materials.

17 January 2022 in Coatings
Verified
Journal Article
Open access
PDF file
RRRakesh Roy
Rakesh Roy
SGSourav Kumar Ghosh
Sourav Kumar Ghosh
TKTanvir Ibna Kaisar
Tanvir Ibna Kaisar
TATazim Ahmed
Tazim Ahmed
SHShakhawat Hossain
Shakhawat Hossain
Md Mahfuzur RahmanMd Mahfuzur Rahman
Md Mahfuzur Rahman
The effect of four controllable input process parameters of AISI 4140 steel, cross-feed, workpiece velocity, wheel velocity, and the depth of cut were experimentally investigated under dry and wet conditions. Three responses, contact temperature, material removal rate (MRR), and machining cost during surface grinding of AISI 4140 steel, were considered. The process was optimized using a recently developed combined methodology based on response surface methodology (RSM) and desirability functional approach (DFA). RSM generated the models of the responses for prediction while DFA solved these multi-response optimization problems. The DFA approach employed an objective function known as the desirability function, which converts an estimated response into a scale-free value known as desirability. The optimum parameter was attained at the maximum overall desirability. An analysis of variance (ANOVA) was conducted to confirm the model adequacy. From the results of the study, for equal weights of responses, the corresponding optimal values of the input parameters cross-feed, workpiece velocity, the wheel or cutting velocity and the depth of cut were found to be 6 mm/pass, 12 m/min, 15 m/s, and 0.095 mm respectively in wet conditions. The corresponding predicted output responses were: 134.55 °C for the temperature, and 7.366 BDT (Taka, Currency of Bangladesh) for the total cost with an overall desirability of 0.844. Confirmation testing of optimized parameters, i.e., checking the validity of optimal set of predicted responses with the real experimental run were conducted, and it was found that the experimental value for temperature and total cost were 140.854 °C and 8.36 BDT, respectively, with an overall desirability of 0.863. Errors of the predicted value from the experimental value for equal weightage scheme were 4.47% for the temperature and 7.37% for the total cost. It was also found that if the temperature was prioritized, then the wet condition dominated the overall desirability, which was expected. However, if the cost was given high weightage, dry condition achieved the highest overall desirability. This can be attributed to the cutting in the wet condition which was more expensive due to the application of cutting fluid. The proposed model was found to be new and highly flexible in the sense that there was always an option at hand to focus on a particular response if needed.

19 November 2021 in Coatings
Verified
Journal Article
Open access
PDF file
Md. Reazuddin ReponMd. Reazuddin Repon
Md. Reazuddin Repon
Tarikul IslamTarikul Islam
Tarikul Islam
HSHalima Tus Sadia
Halima Tus Sadia
Daiva MikucionieneDaiva Mikucioniene
Daiva Mikucioniene
SHShakhawat Hossain
Shakhawat Hossain
Mosab KaseemMosab Kaseem
Mosab Kaseem
Multifunctional fabrics using conventional processes have piqued increasing global interest. The focus of this experiment was to assess the modification of the cotton fabric surface by utilizing silver nanoparticles (AgNPs) and introducing functional properties along with sustainable dyeing performance. A single-jersey knitted fabric composed of cellulose-enriched 100% natural fiber (cotton) with an areal density of 172 GSM was used in this study. The standard recipe and test methods were employed. FTIR-ATR spectra were used to determine the fixing of AgNPs onto the fiber surface. A comparative assessment was conducted in response to the distribution of color, color fastness to wash, water, perspiration, rubbing, and light. Scanning electron microscopy (SEM) was used to characterize the surface of nano-Ag-deposited specimens. In terms of functional properties, antimicrobial activity was scrutinized. Our findings reveal that the nanoparticles impart remarkable antibacterial effects to cellulose-enriched fabric against S. aureus (Gram-positive) and E. coli (Gram-negative). Direct dyes were used for dyeing the proposed samples, resulting in enhanced dyeing performance. Except for light fastness, the samples dipped with AgNPs showed outstanding color levelness and color durability characteristics. The developed fabrics can be applied in a wide range of functions, including protective clothing, packaging materials, and healthcare, among others.