Yunbing Hou

Yunbing Hou


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
LDLili Du
Lili Du
YHYunbing Hou
Yunbing Hou
SZShuheng Zhong
Shuheng Zhong
KQKai Qu
Kai Qu
Resource exploitation and rapid urbanization in coal mining areas with a high groundwater table (CMA-HGT) have created double pressure on regional ecological security and increased the vulnerability of the ecological environment. Ecological restoration should be carried out to balance the relationship between economic development and ecological and environmental protection. An ecological security pattern (ESP) can identify key locations that are critical to maintaining ecosystem service stability and landscape connectivity, with territories displaying relatively high vulnerability identified as priority areas for ecological restoration. The Jining planning area (JPA), a typical representative of CMA-HGT, was taken as the study area. To construct the integrated ESP, ecological sources were identified by measuring the importance of multiple ecosystem services and landscape connectivity. Then, the ecological resistance surface was constructed, and the ecological corridors, pinch points, and barriers were determined using circuit theory. Ecological vulnerability (EV) evaluation was performed from the perspectives of natural factors and human activities. The study results showed that the spatial superposition of ESP and EV can effectively identify priority areas for ecological restoration. The ecological restoration priority areas for ecological sources, ecological corridors, and ecological pinch points were 44.56 km2, 11.7 km2, and 9.96 km2, respectively, and corresponding restoration strategies were proposed. Some valuable references were provided for the identification and restoration of priority areas for ecological restoration in CMA-HGT.

27 March 2022 in Minerals
Verified
Journal Article
Open access
PDF file
PDPengchu Ding
Pengchu Ding
YHYunbing Hou
Yunbing Hou
DHDong Han
Dong Han
XZXing Zhang
Xing Zhang
SCShuxiong Cao
Shuxiong Cao
Chun Quing LiChun Quing Li
Chun Quing Li
In China, more than 10,000 Tailings storage facilities (TSF) have been created on the ground surface through mineral mining processes, these TSF occupy a large amount of land. The strength of the tailings is too low to be able to stand on its own without strengthening. In order to save land resources and alleviate the damage to the environment caused by mineral mining, it is necessary to reinforce the TSF so that they can store more tailings. China is one of the countries with the largest area of permafrost and seasonal frozen regions, accounting for about 75% of the country’s total land area. The problem can be exacerbated in these regions where the freeze–thaw effect can further degrade the strength of tailings. A review of the literature suggests that there is little research on the mechanical and microstructural properties of tailings reinforced with cement-based materials under freeze–thaw conditions, especially when the tailings are to be discharged to land for sustainable development. This study investigates the effect of freeze–thaw cycles on the mechanical properties and microstructural changes of tailings reinforced with cement-based materials to mitigate environmental hazards. Unconfined compressive strength (UCS) tests, scanning electron microscopic images, X-Ray Diffraction tests, thermogravimetry tests and mercury intrusion porosimetry tests were conducted on samples of tailings. The results from this study show that freeze–thaw cycles reduce the UCS of all the tested samples eventually, but the frozen temperature does not significantly affect the UCS. The larger number of freeze–thaw cycles, the more damage is to the surface morphology and the matrix of the tailings. The results presented in the paper can help engineers and managers to effectively transport the TSF to other locations to minimize environmental hazards to achieve sustainable production of mineral mining processes.

17 January 2019 in Processes
Verified
Journal Article
Open access
PDF file
YHYunbing Hou
Yunbing Hou
PDPengchu Ding
Pengchu Ding
DHDong Han
Dong Han
XZXing Zhang
Xing Zhang
SCShuxiong Cao
Shuxiong Cao
Blast furnace slag (BFS) is often used as a cement-based raw material for underground filling and surface cemented paste discharge of tailings during mining processes. This paper studied a new cement-based material (NCM) with BFS to replace ordinary Portland cement (OPC). A uniaxial compressive strength (UCS) experiment was used to test the mechanical strength of samples; X-ray diffraction and thermal gravity experiments were used to test the crystalline phases and amount of hydration products by samples; a scanning electron microscope experiment was used to observe the influence of the hydration products morphology by samples; mercury intrusion porosimetry experiment was used to analyze the pore size distribution of samples. The samples with NCM had an optimum UCS; the crystalline phases of the hydration products were similar in OPC and NCM. However, the amount of product formed in OPC was less than that in NCM at the same curing time; more ettringite and calcium silicate hydrate were produced in samples with NCM, which filled the pores and enhanced the UCS of the samples. The final mercury intrusion volume of the samples with NCM were lower than the samples with OPC at the same curing time, which showed that samples with NCM had lower porosities. For the samples with NCM and OPC cured from 7 days to 28 days, the mercury intrusion volume was reduced by 18% and 13%, and the most common pore size of the samples reduced by 53% and 29%, respectively. This showed after 21 days curing time, the pores of all the samples getting smaller; however, the samples with NCM were more compact. The main ingredients of the NCM were clinker, lime, gypsum and BFS, and its ratio was 14:6:10:70. The content of additives to NCM was 0.4%, and the ratio of sodium sulfate: alum: sodium fluorosilicate was 2:1:1.

29 August 2022 in Energies
Verified
Journal Article
Open access
PDF file
YHYunbing Hou
Yunbing Hou
JCJunqi Cui
Junqi Cui
RLRuipeng Liu
Ruipeng Liu
Gas control in the heading face of a coal roadway is an important and difficult point in coal mining in China. On the basis of analyzing the disadvantages of high gas control cost and long drainage period in the existing mine heading face, a long-distance pre-drainage method of long-distance drilling is proposed to control the gas in the heading face so as to improve the tunneling speed. Applied to the engineering geological conditions of Changcun coal mine, the technology is studied in detail. First, a gas migration model considering permeability changing with time is established, and the model is put into the numerical simulation software to study the variation law of permeability and gas pressure under the conditions of single borehole and multi-borehole drainage. The results show that with the increase of drainage time, the permeability around the borehole increases gradually, the gas pressure decreases gradually, and the permeability at the borehole boundary increases the most, reaching 1.2 times the initial permeability. In the process of multi-borehole drainage, there will be mutual influence between boreholes, but with the increase of borehole spacing, the degree of this influence gradually decreases. Second, according to the results of numerical simulation, a reasonable gas drainage scheme is designed and applied in the field. The field application shows that the technology has a good gas drainage effect, the gas drainage concentration and flow are at a high level for a long time, the drilling cuttings quantity is always lower than the critical value, and the excavation length of roadway increases by more than 50 m per month. These results indicate that this technology is a promising method to realize the safe and rapid excavation of a mine coal roadway.

6 August 2025 in iScience
Verified
Journal Article
Open access
YWYaxian Wang
Yaxian Wang
JLJizhe Li
Jizhe Li
XZXian Zhang
Xian Zhang
KLKai Li
Kai Li
JFJing-Li Fan
Jing-Li Fan
YHYunbing Hou
Yunbing Hou
Carbon capture and storage (CCS) plays a pivotal role in China’s low-carbon power transition but faces high costs and multiple uncertainties related to technology, policy, and economics. CCS clusters, along with the associated hubs, offer an opportunity to tackle this issue. Therefore, a CCS cluster source-sink matching model was developed based on fuzzy possibility programming and interval linear programming methods under multiple uncertainties. The cluster layout, shared pipeline network, and cost reduction potential were explored. Results show that the North China, Northwest China, East China, and South China regions will be prioritized for the development of CCS cluster projects. Compared to “point-to-point” projects, CCS clusters have great potential to reduce pipeline lengths by [81.5%, 81.8%], and lower the plant-level levelized cost of CCS by [35.7%, 86.9%]. This study provides a system-wide insight for CCS cluster development and cost reduction assessment under multiple uncertainties.

10 September 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
YHYunbing Hou
Yunbing Hou
SXShiyu Xi
Shiyu Xi
HLHuaqing Li
Huaqing Li
YFYudong Fan
Yudong Fan
FLFuchun Li
Fuchun Li
JHJunwei Hao
Junwei Hao
This paper innovatively constructs a comprehensive material cycle network framework for the circular economy system of the coal industry and evaluates the circular economy efficiency of China’s provincial coal industry from 2011 to 2021 using a comprehensive evaluation model that integrates emergy analysis and dynamic network data envelopment analysis (DEA). The research delves into the evolutionary characteristics of the coal industry’s circular economy and identifies the underlying causes of inefficiency. The results reveal that the circular economy in China’s coal industry has gone through three stages: the transformation period, the reinforcement period, and the growth period, with the inefficiency of waste reutilization being the key factor restricting the overall improvement in efficiency. The circular economy model in the production phase is gradually shifting from an extensive linear model to a clean, closed-loop model, while a significant gap remains between the high-emission linear model and the low-pollution closed-loop model in the utilization phase. Furthermore, regional heterogeneity mainly arises from imbalances in the operational efficiency of the circular economy system. This study not only reveals the deep-seated reasons for the low efficiency of circular economy in China’s coal industry but also provides strategies and directions for achieving a more efficient circular economy and carbon mitigation goals.