As the Internet of Things (IoT) continues to expand, the demand for the use of energy-efficient circuits and battery-less devices has grown rapidly. Battery-less operation, zero maintenance and sustainability are the desired features of IoT devices in fifth generation (5G) networks and green Industry 4.0 wireless systems. The integration of energy harvesting systems, IoT devices and 5G networks has the potential impact to digitalize and revolutionize various industries such as Industry 4.0, agriculture, food, and healthcare, by enabling real-time data collection and analysis, mitigating maintenance costs, and improving efficiency. Energy harvesting plays a crucial role in envisioning a low-carbon Net Zero future and holds significant political importance. This survey aims at providing a comprehensive review on various energy harvesting techniques including radio frequency (RF), multi-source hybrid and energy harvesting using additive manufacturing technologies. However, special emphasis is given to RF-based energy harvesting methodologies tailored for battery-free wireless sensing, and powering autonomous low-power electronic circuits and IoT devices. The key design challenges and applications of energy harvesting techniques, as well as the future perspective of System on Chip (SoC) implementation, data digitization in Industry 4.0, next-generation IoT devices, and 5G communications are discussed.

A wristwatch-based wireless sensor platform for IoT wearable health monitoring applications is presented. The paper describes the platform in detail, with a particular focus given to the design of a novel and compact wireless sub-system for 868 MHz wristwatch applications. An example application using the developed platform is discussed for arterial oxygen saturation (SpO₂) and heart rate measurement using optical photoplethysmography (PPG). A comparison of the wireless performance in the 868 MHz and the 2.45 GHz bands is performed. Another contribution of this work is the development of a highly integrated 868 MHz antenna. The antenna structure is printed on the surface of a wristwatch enclosure using laser direct structuring (LDS) technology. At 868 MHz, a low specific absorption rate (SAR) of less than 0.1% of the maximum permissible limit in the simulation is demonstrated. The measured on-body prototype antenna exhibits a −10 dB impedance bandwidth of 36 MHz, a peak realized gain of −4.86 dBi and a radiation efficiency of 14.53% at 868 MHz. To evaluate the performance of the developed 868 MHz sensor platform, the wireless communication range measurements are performed in an indoor environment and compared with a commercial Bluetooth wristwatch device.

For the first time, this paper reports a smart museum archive box that features a fully integrated wireless powered temperature and humidity sensor. The smart archive box has been specifically developed for microclimate environmental monitoring of stored museum artifacts in cultural heritage applications. The developed sensor does not require a battery and is wirelessly powered using Near Field Communications (NFC). The proposed solution enables a convenient means for wireless sensing with the operator by simply placing a standard smartphone in close proximity to the cardboard archive box. Wireless sensing capability has the advantage of enabling long-term environmental monitoring of the contents of the archive box without having to move and open the box for reading or battery replacement. This contributes to a sustainable preventive conservation strategy and avoids the risk of exposing the contents to the external environment, which may result in degradation of the stored artifacts. In this work, a low-cost and fully integrated NFC sensor has been successfully developed and demonstrated. The developed sensor is capable of wirelessly measuring temperature and relative humidity with a mean error of 0.37 °C and ±0.35%, respectively. The design has also been optimized for low power operation with a measured peak DC power consumption of 900 μW while yielding a 4.5 cm wireless communication range. The power consumption of the NFC sensor is one of the lowest found in the literature. To the author’s knowledge, the NFC sensor proposed in this paper is the first reporting of a smart archive box that is wirelessly powered and uniquely integrated within a cardboard archive box.

The concept of optical transparency in antennas for epidermal electronics is demonstrated in this work as a means of improving the long-term comfort-of-wear level and possibly opening up a wider range of applications. In contrast to previous attempts, the epidermal antenna transparency is achieved by employing dielectric and conductive materials that are both transparent and flexible (i.e., polydimethylsiloxane transparent conductive textile composite) via a nonclean room procedure that is relatively simpler and less expensive. To demonstrate the concept, a modified rectangular loop epidermal antenna for an arm-worn wireless sensing system operating at 868-MHz ultra high-frequency (UHF) band is designed. Through a systematic numerical investigation, an interesting radiation response of the loop epidermal antenna as the result of two opposing mechanisms of radiation and loss is revealed, which dictates a specific design guideline for the loop when attached to the body compared to that in free space. Two antenna prototypes were fabricated with the developed transparent composite and its nontransparent counterpart. Then, comprehensive characterizations comparing both epidermal antenna prototypes were carried out, including antenna return loss and far-field tests on a human forearm phantom, and indoor wireless connectivity tests using a human test subject. By showing similar performance between the two prototypes, the study provides a convincing demonstration of the applicability of the developed transparent composite for the class of epidermal antenna and the capability of a transparent antenna to enable wireless connectivity in the context of epidermal electronics.

With recent advances in wearable wrist-worn wireless sensing applications, the demand for smartwatches and wristbands is rapidly increasing due to their widespread adoption in applications such as smart health monitoring, security, and fitness tracking. Currently, these devices primarily operate in the 2.45 GHz band, leveraging the availability of Bluetooth and Wi-Fi wireless technologies. However, the use of Sub-GHz frequencies (e.g., 433 MHz, 868 MHz, 915 MHz, 923 MHz) for wearable systems has also gained interest due to the emergence of wireless technologies like long-range wide area network (LoRaWAN), narrowband-IoT (NB-IoT) and Sigfox, which offer the potential for long-range wireless communications and sensing applications. In recent times, there has been a notable surge in the commercial production of a variety of Sub-GHz wrist-worn wireless sensing devices for health monitoring and tracking applications. Nevertheless, communications at Sub-GHz frequencies present significant challenges in antenna design, primarily due to the practical size constraints of wrist-worn devices and the necessity for using electrically small antennas. This paper meticulously reviews wrist-worn Sub-GHz antennas reported in the literature, analyzing key antenna parameters such as antenna topology, size, impedance bandwidth, peak realized gain, radiation efficiency, and specific absorption rate (SAR). Additionally, it underlines antenna design challenges, limitations, current trends, and presents potential future perspectives. To the best of the author’s knowledge, there is currently no existing literature comprehensively reviewing Sub-GHz wrist-worn antennas. Therefore, this paper represents the inaugural effort to provide a comprehensive review in this specific domain.

In this letter, the design and modeling of a bandwidth-enhanced 915 MHz wristwatch antenna is presented. This letter extends previous work by the authors, with a key focus on significantly improving the impedance bandwidth of the antenna. The antenna proposed here achieves a measured 107% bandwidth improvement compared to the previously reported work. This is achieved by optimizing the feed structure to excite two closely located resonant modes that can be independently tuned to maximize the impedance bandwidth. Conceptual equivalent circuit models for the previous and proposed antennas are derived to explain the bandwidth enhancement. In addition, an equivalent transmission line model is, then, presented in order to accurately explain and analyze the impedance characteristics of the antenna. On-body measurements of the prototype antenna show a –10 dB impedance bandwidth of 62 MHz, a peak realized gain of –4.6 dBi, and a simulated radiation efficiency of 17.8% at 915 MHz. This antenna exhibits a low specific absorption rate value of 0.02 W/kg with 11 dBm input power. The previous performance makes the antenna a suitable candidate for 915 MHz wristwatch-based wireless applications.