In this paper, the authors give a new model of squirrel-cage induction motors under stator and rotor faults. First, they study an original model that takes into account the effects of interturn faults resulting in the shorting of one or more circuits of stator-phase winding. They introduce, thus, additional parameters to explain the fault in the three stator phases. Then, they propose a new faulty model dedicated to broken rotor bars detection. The corresponding diagnosis procedure based on parameter estimation of the stator and rotor faulty model is proposed. The estimation technique is performed by taking into account prior information available on the safe system operating in nominal conditions. A special three-phase induction machine has been designed and constructed in order to simulate true faulty experiments. Experimental test results show good agreement and demonstrate the possibility of detection and localization of previous failures.
1 July 2008 in Simulation Modelling Practice and Theory
This paper proposes an original, simple, and fast permanent magnet synchronous generator model implemented with a new conception on the graphic interface of MATLAB/Simulink environment. The obtained physical model suggests a new way to easily carry out different types of stator faults such as interturns short-circuit faults, phase-to-phase faults, and phase-to-ground faults, as well as simultaneous multifaults. This is handled by connecting the two desired points in the stator on the graphic interface of Simulink exactly as they can be carried out in the experimental tests. This model has the originality to take into account the arrangement of the stator windings of a multipole machine by differentiating between the windings under the same pole-pair and those under different pole-pairs. A comparison between the simulated and the experimental results is done to verify the behavior of the proposed model in both healthy and faulty modes under different operating speeds. The good comparison results lead to validate the correct behavior of the proposed model with a satisfactory accuracy.
1 October 2010 in Simulation Modelling Practice and Theory