To explore the effect of airflow on water atomization mechanism in mine exhaust heat recovery system, an experimental study of the dispersed phase fraction for droplets is conducted by Malvern laser particle size analyzer. This paper focuses on the influence of gas disturbance on water atomization in a curved diffuser in a ventilation system. With the theory of liquid breakup, it shows how liquid sheet occurs in primary breakup under different operating conditions. In case that the spray flows in the same direction as the airflow, the dominant factor affecting the breakup length of liquid film near the atomizing nozzle is the injection pressure. At a long distance from the nozzle, the droplet goes through vibrational shape oscillation and eventually further breakup in the complete atomization area. The main conclusions are as follows: (1) the dispersed phase fraction for droplets reaches maximum when the airflow is 3.2 m3/s; (2) droplets achieve the optimal atomization effect of the spray; (3) the heat and moisture should be fully exchanged.
The flux performance of ceramic membranes is the basis for their efficient use. To study ceramic membrane flux variation, different filtration operating conditions were tested and the functional relationship between the membrane's clean water flux and the operating pressure within a given range obtained. The membrane's critical pressure and flux were determined by using pressure increments, and the flux variation law under different pressures determined experimentally. Analysis of the flux law and the membrane parameters enabled establishment of the flux model of filtration process and a model of flux stabilization after the deposition layer formed. The applicability of the model was proved by comparing and verifying the experimental data.