This paper reports the experimental results of a study investigating the effect of CFRP strengthening of metallic structures for increasing fatigue life. In the study, samples made form puddled steel and mild S235 grade steel strengthened with CFRP strips were examined. Samples were subjected to...
1 November 2025 in Advances in Science and Technology Research Journal
The main objective of the study was to comparatively analyse the cavitation erosion resistance and dry sliding wear resistance of two hardfacing alloys: NiCrBSi (a self-fluxing alloy) and CoCrWC (Stellite 6), as well as two popular steels—S235JR mild steel (approx. 0.17% C) and stainless steel...
The paper presents the results of research on the suitability of externally bonded composite strips of carbon fibre-reinforced polymer (CFRP) for post-strengthening of steel structures. Specimens with the strips applied on both sides (double cover joints) were prepared and subjected to axial tension tests to find which of the eight different configurations of end detailing provides the strongest bond. The strengthening effect of externally bonded composite strips was tested on sixteen steel I-beams, including determination of the effective bond length and the effects of the thickness of adhesive layer and modulus of the CFRP strip on the load capacity of the steel-adhesive-CFRP strip assembly. The research showed that externally adhered CFRP strips can increase the bending strength of steel structures (an 8% increase was obtained in the experiments) and the shape of spew fillet can have a significant influence on the strength of the strengthened system (the difference reaching up to 57%).
Article describes experiments on the effect of steel – FRP bond end shaping on bond strength. The influence of changing the bond end geometry on behavior of axially loaded steel elements reinforced by CFRP double patch joints with varying overlap length was analyzed. Bond failure at steel-adhesive interface was dominant failure mode. The test results showed clearly that geometry change of the bond end of strengthening CFRP plate and adhesive in composite plate region can significantly increase bond capacity. Conclusions and plan of further works on CFRP strengthening of steel elements were described.