Bauxite residue, known as red mud, is a by-product of alumina production using the Bayer process. Currently, its total global storage amounts to over 4.6 billion tons, including about 600 million tons in Russia. The total global storage of red mud occupies large areas, leading to environmental damage and increasing environmental risks. Moreover, it contains a significant amount of sodium, which is easily soluble in subsoil water; therefore, a sustainable approach for comprehensive recycling of red mud is necessary. The bauxite residue contains valuable elements, such as aluminum, titanium, and scandium, which can be recovered using liquid media. In recent years, many methods of recovery of these elements from this waste have been proposed. This paper provides a critical review of hydrometallurgical, solvometallurgical, and complex methods for the recovery of valuable components from red mud, namely, aluminum, titanium, sodium, and rare and rare-earth elements. These methods include leaching using alkaline or acid solutions, ionic liquids, and biological organisms, in addition to red mud leaching solutions by extraction and sorption methods. Advantages and disadvantages of these processes in terms of their environmental impact are discussed.

Red mud is a by-product of alumina production from bauxite ore by the Bayer method, which contains considerable amounts of valuable components such as iron, aluminum, titanium, and scandium. In this study, an approach was applied to extract iron, i.e., carbothermic reduction roasting of red mud with sodium and potassium carbonates followed by magnetic separation. The thermodynamic analysis of iron and iron-free components’ behavior during carbothermic reduction was carried out by HSC Chemistry 9.98 (Outotec, Pori, Finland) and FactSage 7.1 (Thermfact, Montreal, Canada; GTT-Technologies, Herzogenrath, Germany) software. The effects of the alkaline carbonates’ addition, as well as duration and temperature of roasting on the iron metallization degree, iron grains’ size, and magnetic separation process were investigated experimentally. The best conditions for the reduction roasting were found to be as follows: 22.01% of K₂CO₃ addition, 1250 °C, and 180 min of duration. As a generalization of the obtained data, the mechanism of alkaline carbonates’ influence on iron grain growth was proposed.

Red mud is a hazardous waste of the alumina industry that contains high amounts of iron, aluminum, titanium and rare-earth elements (REEs). One of the promising methods for the extraction of iron from red mud is carbothermic reduction with the addition of sodium salts. This research focuses on the process of hydrochloric high-pressure acid leaching using 10 to 20% HCl of two samples of non-magnetic tailings obtained by 60 min carbothermic roasting of red mud at 1300 °C and the mixture of 84.6 wt.% of red mud and 15.4 wt.% Na₂SO₄ at 1150 °C, respectively, with subsequent magnetic separation of metallic iron. The influence of temperature, leaching duration, solid-to-liquid-ratio and acid concentration on the dissolution behavior of Al, Ti, Mg, Ca, Si, Fe, Na, La, Ce, Pr, Nd, Sc, Zr was studied. Based on the investigation of the obtained residues, a mechanism for passing valuable elements into the solution was proposed. It has shown that 90% Al, 91% Sc and above 80% of other REEs can be dissolved under optimal conditions; Ti can be extracted into the solution or the residue depending on the leaching temperature and acid concentration. Based on the research results, novel flowsheets for red mud treatment were developed.

The processing of electric arc furnace dust by the Waelz process forms the iron-containing residue called Waelz slag. In the paper, best practices for recycling of Waelz slag from electric...

Red mud is an iron-containing waste of alumina production with high alkalinity. A promising approach for its recycling is solid-phase carbothermic roasting in the presence of special additives followed by magnetic separation. The crucial factor of the separation of the obtained iron metallic particles from gangue is sufficiently large iron grains. This study focuses on the influence of Na₂SO₄ addition on iron grain growth during carbothermic roasting of two red mud samples with different (CaO + MgO)/(SiO₂ + Al₂O₃) ratio of 0.46 and 1.21, respectively. Iron phase distribution in the red mud and roasted samples were investigated in detail by Mössbauer spectroscopy method. Based on thermodynamic calculations and results of multifactorial experiments, the optimal conditions for the roasting of the red mud samples with (CaO + MgO)/(SiO₂ + Al₂O₃) ratio of 0.46 and 1.21 were duration of 180 min with the addition of 13.65% Na₂SO₄ at 1150 °C and 1350 °C followed by magnetic separation that led to 97% and 83.91% of iron recovery, as well as 51.6% and 83.7% of iron grade, respectively. The mechanism of sodium sulfate effect on iron grain growth was proposed. The results pointed out that Na₂SO₄ addition is unfavorable for the red mud carbothermic roasting compared with other alkaline sulfur-free additives.