A surface-emitting distributed feedback (DFB) laser with second-order gratings typically excites an antisymmetric mode that has low radiative efficiency and a double-lobed far-field beam. The radiative efficiency could be increased by using curved and chirped gratings for infrared diode lasers, plasmon-assisted mode selection for mid-infrared quantum cascade lasers (QCLs), and graded photonic structures for terahertz QCLs. Here, we demonstrate a new hybrid grating scheme that uses a superposition of second and fourth-order Bragg gratings that excite a symmetric mode with much greater radiative efficiency. The scheme is implemented for terahertz QCLs with metallic waveguides. Peak power output of 170 mW with a slope-efficiency of 993 mW A⁻¹ is detected with robust single-mode single-lobed emission for a 3.4 THz QCL operating at 62 K. The hybrid grating scheme is arguably simpler to implement than aforementioned DFB schemes and could be used to increase power output for surface-emitting DFB lasers at any wavelength.

Plasmonic lasers suffer from low output power and divergent beams due to their subwavelength metallic cavities. We developed a phase-locking scheme for such lasers to significantly enhance their radiative efficiency and beam quality. An array of metallic microcavities is longitudinally coupled through traveling plasmon waves, which leads to radiation in a single spectral mode and a diffraction limited single-lobed beam in the surface normal direction. We implemented our scheme for terahertz plasmonic quantum-cascade lasers (QCLs) and measured peak output power in excess of 2 W for a single-mode 3.3 T H z QCL radiating in a narrow single-lobed beam, when operated at 58 K in a compact Stirling cooler. We thereby demonstrated an order of magnitude increase in power and thirty-times higher average intensity for monolithic single-mode terahertz QCLs compared to prior work. The number of photons radiated from the cavity outnumber those absorbed within its claddings and semiconductor medium, which constitutes > 50 % radiative efficiency and is significantly greater than that achieved for previous single-mode mid-infrared or terahertz QCLs.

Plasmonic lasers (spasers) generate coherent surface plasmon polaritons (SPPs) and could be realized at subwavelength dimensions in metallic cavities for applications in nanoscale optics. Plasmonic cavities are also utilized for terahertz quantum-cascade lasers (QCLs), which are the brightest available solid-state sources of terahertz radiation. A long standing challenge for spasers that are utilized as nanoscale sources of radiation, is their poor coupling to the far-field radiation. Unlike conventional lasers that could produce directional beams, spasers have highly divergent radiation patterns due to their subwavelength apertures. Here, we theoretically and experimentally demonstrate a new technique for implementing distributed feedback (DFB) that is distinct from any other previously utilized DFB schemes for semiconductor lasers. The so-termed antenna-feedback scheme leads to single-mode operation in plasmonic lasers, couples the resonant SPP mode to a highly directional far-field radiation pattern, and integrates hybrid SPPs in surrounding medium into the operation of the DFB lasers. Experimentally, the antenna-feedback method, which does not require the phase matching to a well-defined effective index, is implemented for terahertz QCLs, and single-mode terahertz QCLs with a beam divergence as small as $4°\times 4°$ are demonstrated, which is the narrowest beam reported for any terahertz QCL to date. Moreover, in contrast to a negligible radiative field in conventional photonic band-edge lasers, in which the periodicity follows the integer multiple of half-wavelengths inside the active medium, antenna-feedback breaks this integer limit for the first time and enhances the radiative field of the lasing mode. Terahertz lasers with narrow-beam emission will find applications for integrated as well as standoff terahertz spectroscopy and sensing. The antenna-feedback scheme is generally applicable to any plasmonic laser with a Fabry–Perot cavity irrespective of its operating wavelength and could bring plasmonic lasers closer to practical applications.

The potentiality of a phoxonic crystal for sensing of biodiesel in a binary mixture of diesel and biodiesel is theoretically investigated. Using the transfer matrix method, the transmission of acoustic and optical waves through a periodic one-dimensional crystal of Si–SiO₂ layers is studied. A pass band is created in the band gap region by introducing a cavity in the considered one-dimensional crystal structure. This pass band can also be considered as a defect mode, and it is found that its position is highly dependent on mole concentration of binary mixture of biodiesel and diesel present in the cavity. The sensitivity of the sensor for a binary mixture of biodiesel and diesel in the cavity with various mole concentrations is estimated. Simulated results provide a valuable guidance for designing a phoxonic crystal sensor consisting of a defect layer.

A new tuning mechanism is demonstrated for single-mode metal-clad plasmonic lasers, in which the refractive-index of the laser’s surrounding medium affects the resonant-cavity mode in the same vein as the refractive-index of gain medium inside the cavity. Reversible, continuous, and mode-hop-free tuning of $\sim 57\mathrm{GHz}$ is realized for single-mode narrow-beam terahertz plasmonic quantum-cascade lasers (QCLs), which is demonstrated at a much more practical temperature of $78\mathrm{K}$ . The tuning is based on post-process deposition/etching of a dielectric (silicon-dioxide) on a QCL chip that has already been soldered and wire-bonded onto a copper mount. This is a considerably larger tuning range compared to previously reported results for terahertz QCLs with directional far-field radiation patterns. The key enabling mechanism for tuning is a recently developed antenna-feedback scheme for plasmonic lasers, which leads to the generation of hybrid surface-plasmon-polaritons propagating outside the cavity of the laser with a large spatial extent. The effect of dielectric deposition on QCL’s characteristics is investigated in detail including that on maximum operating temperature, peak output power, and far-field radiation patterns. Single-lobed beam with low divergence ($<7^{\mathrm{°}}$ ) is maintained through the tuning range. The antenna-feedback scheme is ideally suited for modulation of plasmonic lasers and their sensing applications due to the sensitive dependence of spectral and radiative properties of the laser on its surrounding medium.

To elucidate the secretary function of immune cells, we develop a nanoplasmonic circular interferometric biosensor based on intensity interrogation for label-free and dynamic sensing of molecular secretion. Exceptional sensitivity has been demonstrated through coupling free light and surface plasmon polariton (SPPs) waves, which generates a constructive and deconstructive interference pattern with high contrast and narrow linewidth when illuminated by white light. Alternatively, by adopting a narrow-band LED source and a CCD camera in this work, the transmission intensity of multiple sensing units is monitored simultaneously with a simple collinear optical setup. This intensity-modulated sensing platform yields a resolution of 4.1 × 10⁻⁵ refractive index unit (RIU) with a high temporal resolution of 1 s and a miniaturized footprint as small as 9.8 × 9.8 μm² for a single sensing unit. By integrating the signals from multiple sensor units, the resolution of a 12 × 12 sensor array was found to reach 7.3 × 10⁻⁶ RIU. We apply this sensor array to detect matrix metalloproteinase 9 (MMP-9) secretion from human monocytic cells, THP-1, at different time points after lipopolysaccharide (LPS) simulation and the results are in good agreement with enzyme-linked immunosorbent assay (ELISA) tests, but without the need for labeling. The spatial, temporal and mass resolutions of the sensor array are found to exceed other label-free technologies. These biomolecular arrays, incorporated in a microfluidic sensor platform, hold great potential for the study the dynamics and interplay of cell secretion signals and achieving a better understanding of single cell functions.