Shot peening is one of the most famous mechanical surface treatments to improve fatigue performance of metallic components, which is attributed to high amplitude compressive residual stresses. A numerical approach is developed to analyze the residual stresses in 301LN metastable austenitic stainless steel by shot peening. The material behavior is described by a proposed constitutive model in which strain-induced martensitic transformation, isotropic hardening and kinematic hardening effects are taken into account properly. Both single shot and random multiple shots peening were simulated and analyzed. A numerical method is presented with the Python programming language to make the multiple shots follow a random probability distribution. Results demonstrate that the simulated equivalent plastic strains and martensitic volume fractions agree well with the experimental ones, which verify the validity of the constitutive model. Besides, the numerical method is effective at achieving a realistic surface coverage. The maximum compressive residual stress by the Johnson–Cook model is 12% higher than that of the proposed model. Additionally, each hardening effect has an effect on the simulated residual stress. The developed numerical approach can provide a feasible simulation of the shot-peening process and makes an accurate prediction of the residual stress field in 301LN steel.
The fatigue crack propagation of 304 austenitic stainless steel was studied both by experiments and numerical simulations. Two methods were applied to simulate the crack propagation: the extended finite element method (XFEM) and the cohesive zone model (CZM). Based on the XFEM, the direct cyclic solver was used to simulate the fatigue crack propagation. Based on the CZM, the VUMAT subroutine was used to describe the crack tip constitutive equation during fatigue crack propagation, and the mechanical properties of the crack tip were simulated. The effects of different frequency, f, and stress ratio, R, on the fatigue crack growth life were studied by XFEM and CZM separately and compared with the experimental results. Results show that the crack propagation path simulated by the XFEM agrees well with the experimental result, but the deviation of the fatigue life between the simulated results and the experimental results is large. The CZM model can predict the crack propagation life very well in comparison with the experimental data, but it has certain limitations because the crack propagation path is preset.