In small Alpine catchments, floods are mostly triggered by surface runoff generation during convective heavy precipitation events. Their magnitude also depends on the antecedent soil moisture content, which was shown in several previous studies. This study aims at understanding (a) which sites change their surface runoff response to rainfall events with high precipitation intensity under very moist pre-conditions to what extent and (b) on which site characteristics this depends on. Therefore, we conducted repeated rainfall simulation experiments (40–80 m², 1 h, 100 mm h⁻¹) at 20 sites in five Eastern Alpine areas and analyzed their results on the basis of soil-physical parameters derived from collected soil samples.

The Brixenbach valley is a small Alpine torrent catchment (9.2 km², 820–1950 m a.s.l., 47.45°, 12.26°) in Tyrol, Austria. Intensive hydrological research in the catchment since more than 12 years, including a hydrogeological survey, pedological and land use mapping, measurements of precipitation, runoff, soil moisture and infiltration as well as the conduction of rainfall simulations, has contributed to understand the hydrological response of the catchment, its subcatchments and specific sites. The paper presents a synthesis of the research in form of runoff process maps for different soil moisture states and precipitation characteristics, derived with the aid of a newly developed Soil‐hydrological model. These maps clearly visualize the differing runoff reaction of different subcatchments. The pasture dominated areas produce high surface flow rates during short precipitation events (1 h, 86 mm) with high rainfall intensity, whilst the forested areas often develop shallow subsurface flow. Dry preconditions lead to a slight reduction of surface flow, long rainfall events (24 h, 170 mm) to a dominance of deep subsurface flow and percolation.