Compositions of polylactide (PLA) and poly(3-hydroxybutyrate) (PHB) thermoplastic polyesters originated from the nature raw have been obtained by blending under shear deformations and electrospinning methods in the form of films and nanofibers as well as unwoven nanofibrous materials, respectively. The degrees of crystallinity calculated on the base of melting enthalpies and thermal transition temperatures for glassy state, cold crystallization, and melting point for individual biopolymers and ternary polymer blends PLA-PHB- poly(ethyleneglycol) (PEG) have been evaluated. It has been shown that the mechanical properties of compositions depend on the presence of plasticizers PEG with different molar masses in interval of 400–1000. The experiments on the action of mold fungi on the films have shown that PHB is a fully biodegradable polymer unlike PLA, whereas the biodegradability of the obtained composites is determined by their composition. The sorption activity of PLA–PHB nanofibers and unwoven nanofibrous PLA–PHB composites relative to water and oil has been studied and the possibility of their use as absorbents in wastewater treatment from petroleum products has been demonstrated.

Plasma treatment is one of the most promising tools to control surface properties of materials tailored for biomedical application. Among a variety of processing conditions, such as the nature of the working gas and time of treatment, discharge type is rarely studied, because it is mainly fixed by equipment used. This study aimed to investigate the effect of discharge type (direct vs. alternated current) using air as the working gas on plasma treatment of poly(ethylene terephthalate) films, in terms of their surface chemical structure, morphology and properties using X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and contact angle measurements. The effect of the observed changes in terms of subsequent chitosan immobilization on plasma-treated films was also evaluated. The ability of native, plasma-treated and chitosan-coated films to support adhesion and growth of mesenchymal stem cells was studied to determine the practicability of this approach for the biomedical application of poly(ethylene terephthalate) films.

The morphologies and local electronic structures of titanium coatings deposited on the surfaces of highly oriented pyrolytic graphite were determined. Chemical compositions of the oxides formed on the coating surfaces were established. A theoretical model was developed describing the changes in the TiO_x oxides (1.75 < x < 2) band gap depending on the duration and temperature of the titanium film annealing procedure in oxygen. The effective activation energy of oxygen diffusion in TiO_x (1.75 < x < 2) was determined, and the pre-exponential factor of the diffusion coefficient was estimated.

The features of deuterium adsorption on the surface of gold nanoparticles deposited on highly oriented pyrolytic graphite (HOPG) were determined. The results showed that deuterium adsorption on gold nanoparticles takes place at room temperature. The results also showed that the filling of the nanoparticles’ surfaces with the adsorbate occurs from the graphite–gold interface until the entire surface is covered by deuterium. The results of quantum chemical simulations are used to explain the experimental data. A simple model of the observed effects is proposed.

An experimental study of molecular hydrogen adsorption on single gold nanoparticles of various sizes deposited on the surface of highly oriented pyrolytic graphite (HOPG) was carried out by means of scanning tunneling microscopy and spectroscopy. The effect of size on the HOPG/Au system was established. Hydrogen was dissociatively chemisorbed on the surface of gold nanoparticles with an average size of 5–6 nanometers. An increase in the size of nanoparticles to 10 nm or more led to hydrogen chemisorption being inhibited and unable to be detected.

The physicochemical properties of nanoparticles (NPs) of aluminum, gold, nickel, and platinum have been determined by methods of scanning tunneling microscopy and spectroscopy, Auger spectroscopy, and mass spectrometry. The geometric sizes, electronic structure, and surface chemical composition of the NPs have been established. The adsorption heat and the effective activation energy have been determined using the example of the interaction between hydrogen and gold, nickel, and platinum NPs.