The article considers principles of constructing kinetic models of an adsorptive collector layer at sulfide mineral surface and explains the physics of the models that consists in the connection betwe
1 August 2011 in Russian Journal of Non-Ferrous Metals
Thermodynamic studies of the PbS-H2O-O2-CO2-C4H9OCSS−-CrO 42− system and potentiometric measurements of the electrode potential of the galena electrode are performed in alkali solutions of potassium bichromate and potassium butyl xanthate. As a result of an analysis of the probable summary half-reactions of the interaction between galena and the chromate and xanthate ions in alkali media while allowing for various oxidation depths of the sulfide sulfur of galena, new dependences are revealed. It is established that the relation between the concentrations of chromate and xanthate ions at which their interaction with the galena surface is thermodynamically equiprobable is independent of the degree of oxidation of sulfide sulfur of the mineral to S0, S2O 32− , and SO 42− . The dependence of the electrochemical potential on pH and concentration of chromate and xanthate ions in the liquid phase is revealed. The acquired results revealed the potential-determining character of chromate and hydroxide ions on galena.
The flotation recovery of sphalerite depends on the inorganic reagents concentrations in the liquid phase of suspension and pH. This paper presents the results of studies of the interactions of iron (II) containing ions with the sphalerite surface in water solutions at different pH levels. The thermodynamic and electrochemical studies were carried out to analyze possible interactions of sphalerite with iron (II) sulfate in a water environment and relate them to sphalerite flotation with potassium butyl xanthate and sodium dibutyl dithiophosphate. The results of the thermodynamic calculations revealed the possibility of interaction of the sphalerite surface with iron (II) hydrolysis products. The effect of the hydroxide ions concentration on precipitation of iron (II) hydroxides was examined. The findings showed that at pH = 8 there were no precipitates observed in water solutions of FeSO4. Increasing pH of the solutions from 8 to 12 resulted in the formation of iron (II) hydroxides. The potentiometric studies revealed that in slightly alkaline solutions the Fe2+ and FeOH+ cations are potential-determining. In conclusion, the flotation tests with thiol collectors show the activation effect of iron (II) sulphate on sphalerite at low dosage and pH 12. This is evident by a higher flotation recovery of sphalerite at these conditions.
Using the formal kinetics method, the authors have analyzed kinetics of galena and alkali metal xanthate interaction in strong alkaline conditions and explained the existence of the mixed-composition sorptive layer on galena surface.
The paper presents the results of the Gayskoye deposit sulfide ore copper-zinc flotation. The collecting reagents used were as follows: potassium butyl xanthate; sodium butyl dithiophosphate (Af); collector, composed of thionocarbamate-dithiophosphate (CDT) mixture; and аlso mixtures of these collectors in different ratios. Copper-zinc concentrate production efficiency was calculated by the flotation experiments’ results. Hancock criteria were determined, as well as copper and zinc total recovery into concentrate (froth product), and also copper and zinc recovery into copper-zinc concentrate, taking into consideration pyrite recovery. Kinetic criteria of copper-zinc flotation process selectivity were calculated as ratios of copper-and-iron and zinc-and-iron flotation rates constants. Sulfide copper-zinc ore flotation selectivity criterion was proposed taking into consideration copper and zinc processing recovery into copper-zinc concentrate and flotation recovery kinetics. It was revealed that differences between processing and kinetic flotation beneficiation results were observed with different compositions of collectors. The highest selectivity criterion in the Gayskoye deposit sulfide ore copper-zinc flotation was achieved with application of Af–CDT composition of collectors. The work was performed with the financial support from the Federal Targeted Programme «Research and development in the trends of priority growth areas of the science and technology sector of the Russian Federation for 2014–2020», Project RFMEF157514X0085.
1 November 2013 in Russian Journal of Non-Ferrous Metals
The results of thermodynamic calculations and an analysis of the CuFeS2-H2O-O2-CO2-C4H9OCSS−-CrO 42− system, which characterizes the surface state of chalcopyrite in conditions of the selective flotation of copper-lead concentrates according to bichromate technology in the alkali medium, are presented. The electrode potentials of chalcopyrite are measured experimentally in solutions of potassium bichromate and potassium butyl xanthate with alkali pH. Due to the investigations, the mechanism of formation of the sorption layer of the collector on chalcopyrite is considered in the depression conditions of galenite by chromate ions. It is shown theoretically that the degree of oxidation of sulfide sulfur should not affect the competitive reactions of the formation of butyl xanthate on the chalcopyrite surface. It is established from the results of measuring the potential of the chalcopyrite electrode that chromate ions are not potential-deter-mining for chalcopyrite in their broad concentration range. The chalcopyrite surface in alkali solutions of butyl xanthate and potassium bichromate should preferentially hydrophobize due to the formation of butyl copper xanthate, and the sorption layer of the collector of a mixed composition in a form of copper(I) butyl xanthate and dixanthogenide can form only in a narrow range of the values of the redox potential and pH.