Karina Nurgalieva

Mx. Karina Nurgalieva

St. Petersburg Mining University
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AAAbdullah K. Alanazi
Abdullah K. Alanazi
SASeyed Mehdi Alizadeh
Seyed Mehdi Alizadeh
KNKarina Nurgalieva
Karina Nurgalieva
SNSlavko Nešić
Slavko Nešić
JGJohn William Grimaldo Guerrero
John William Grimaldo Guerrero
INIgor M. Narozhnyy
Igor M. Narozhnyy
One of the factors that significantly affects the efficiency of oil and gas industry equipment is the scales formed in the pipelines. In this innovative, non-invasive system, the inclusion of a dual-energy gamma source and two sodium iodide detectors was investigated with the help of artificial intelligence to determine the flow pattern and volume percentage in a two-phase flow by considering the thickness of the scale in the tested pipeline. In the proposed structure, a dual-energy gamma source consisting of barium-133 and cesium-137 isotopes emit photons, one detector recorded transmitted photons and a second detector recorded the scattered photons. After simulating the mentioned structure using Monte Carlo N-Particle (MCNP) code, time characteristics named 4th order moment, kurtosis and skewness were extracted from the recorded data of both the transmission detector (TD) and scattering detector (SD). These characteristics were considered as inputs of the multilayer perceptron (MLP) neural network. Two neural networks that were able to determine volume percentages with high accuracy, as well as classify all flow regimes correctly, were trained.

14 October 2021 in Energies
Verified
Journal Article
Open access
PDF file
KNKarina Nurgalieva
Karina Nurgalieva
LSLiliya Albertovna Saychenko
Liliya Albertovna Saychenko
MRMasoud Riazi
Masoud Riazi
A number of difficulties may be encountered in the final stages of oil field exploitation, including the formation of asphalt–resin–paraffin deposits (ARPDs). It is expedient to use complex technologies to remove the already formed deposits and prevent the formation of ARPDs. This paper focuses on the complex technology of oil field exploitation. This technology combines both the removal of organic deposits and the prevention of the formation of these deposits in the well bottomhole formation zone (BHFZ) system. The calculations for determining the process parameters of selling the ARPD inhibitor solution into the BHFZ are presented in this article. This complex technology includes the process of ARPD removal by flushing the well and the subsequent injection of the developed ARPD solvent into the BHFZ. In addition, the technology is complemented by a method of preventing the formation of these deposits. This method consists of squeezing the ARPD inhibitor and then pumping it by the selling fluid from five to ten times of the volume. This article contains a detailed calculation of the methodology and provides the diagrams for the solvent and inhibitor injection.

9 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
AMAbdulilah Mayet
Abdulilah Mayet
SASeyed Mehdi Alizadeh
Seyed Mehdi Alizadeh
KNKarina Nurgalieva
Karina Nurgalieva
Robert HanusRobert Hanus
Robert Hanus
Ehsan NazemiEhsan Nazemi
Ehsan Nazemi
INIgor M. Narozhnyy
Igor M. Narozhnyy
In the current paper, a novel technique is represented to control the liquid petrochemical and petroleum products passing through a transmitting pipe. A simulation setup, including an X-ray tube, a detector, and a pipe, was conducted by Monte Carlo N Particle-X version (MCNPX) code to examine a two-by-two mixture of four diverse petroleum products (ethylene glycol, crude oil, gasoline, and gasoil) in various volumetric ratios. As the feature extraction system, twelve time characteristics were extracted from the received signal, and the most effective ones were selected using correlation analysis to present reasonable inputs for neural network training. Three Multilayers perceptron (MLP) neural networks were applied to indicate the volume ratio of three kinds of petroleum products, and the volume ratio of the fourth product can be feasibly achieved through the results of the three aforementioned networks. In this study, increasing accuracy was placed on the agenda, and an RMSE < 1.21 indicates this high accuracy. Increasing the accuracy of predicting volume ratio, which is due to the use of appropriate characteristics as the neural network input, is the most important innovation in this study, which is why the proposed system can be used as an efficient method in the oil industry.

20 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
RSRahmad Syah
Rahmad Syah
SASeyed Mehdi Alizadeh
Seyed Mehdi Alizadeh
KNKarina Nurgalieva
Karina Nurgalieva
JGJohn William Grimaldo Guerrero
John William Grimaldo Guerrero
Mahyuddin K. M. NasutionMahyuddin K. M. Nasution
Mahyuddin K. M. Nasution
AMAhmed S. M. Metwally
Ahmed S. M. Metwally
Supercritical carbon dioxide injection in tight reservoirs is an efficient and prominent enhanced gas recovery method, as it can be more mobilized in low-permeable reservoirs due to its molecular size. This paper aimed to perform a set of laboratory experiments to evaluate the impacts of permeability and water saturation on enhanced gas recovery, carbon dioxide storage capacity, and carbon dioxide content during supercritical carbon dioxide injection. It is observed that supercritical carbon dioxide provides a higher gas recovery increase after the gas depletion drive mechanism is carried out in low permeable core samples. This corresponds to the feasible mobilization of the supercritical carbon dioxide phase through smaller pores. The maximum gas recovery increase for core samples with 0.1 mD is about 22.5%, while gas recovery increase has lower values with the increase in permeability. It is about 19.8%, 15.3%, 12.1%, and 10.9% for core samples with 0.22, 0.36, 0.54, and 0.78 mD permeability, respectively. Moreover, higher water saturations would be a crucial factor in the gas recovery enhancement, especially in the final pore volume injection, as it can increase the supercritical carbon dioxide dissolving in water, leading to more displacement efficiency. The minimum carbon dioxide storage for 0.1 mD core samples is about 50%, while it is about 38% for tight core samples with the permeability of 0.78 mD. By decreasing water saturation from 0.65 to 0.15, less volume of supercritical carbon dioxide is involved in water, and therefore, carbon dioxide storage capacity increases. This is indicative of a proper gas displacement front in lower water saturation and higher gas recovery factor. The findings of this study can help for a better understanding of the gas production mechanism and crucial parameters that affect gas recovery from tight reservoirs.

26 September 2016
Verified
Conference Paper
Closed access
PDF file
KNKarina Nurgalieva
Karina Nurgalieva
At the moment, most of the oil fields of the Russian Federation are in their late stage of development. This stage is accompanied by a number of complications for oil, including those associated with the formation of asphaltene, resin and paraffin deposits (ARPD) in downhole equipment. These deposits significantly affect the geological, physical and technological conditions of the oil fields development. They reduce the flow rate of the wells, increase water cut production and produce organic depositions, such as the ARPD There are two methods to struggle with the ARPD in oil production: 1- remove the formed deposits and prophylaxis (prevention) by applying thermal and chemical methods. 2- prevent the formation of the ARPD – by using the inhibitors of these deposits (dispersants, depressant, wetting agents and modifiers). One of the most effective and advanced methods for the removal of the ARPD in the wells is the use of hydrocarbon solvents, the selection of which is usually done experimentally. For selecting an effective solvent in order to remove the paraffin, the composition and type of ARPD are needed to be known. The samples are selected from the oil field of the Orenburg region and ARPD analysis of the samples was conducted. The method of analysis is based on the different solubility of the components in the sediments of certain solvents. Determining the composition of the ARPD has done with the residual oil method by Marcusson. In th result of our experiments we recognized that the type of deposites are the Paraffin. To operate the process of the dissolution and removal of paraffin deposits, we find out that it is better to make a solvent with the composition of aromatic and aliphatic hydrocarbons, with the addition of surfactants. With adding a nonionic surfactant to the solvent can be improved the detergency and dispersancy of the solvent. The results of our experiments showed that with using the created solvent with the composition of aromatic, aliphatic hydrocarbons and surfactants, it is possible to remove the orgnic deposits specially paraffin effectively.

13 August 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
AMAbdulilah Mayet
Abdulilah Mayet
KNKarina Nurgalieva
Karina Nurgalieva
AAAli Awadh Alqahtani
Ali Awadh Alqahtani
INIgor M. Narozhnyy
Igor M. Narozhnyy
HAHala Hashim Alhashim
Hala Hashim Alhashim
IIIlya Indrupskiy
Ilya Indrupskiy
Setting up pipelines in the oil industry is very costly and time consuming. For this reason, a pipe is usually used to transport various petroleum products, so it is very important to use an accurate and reliable control system to determine the type and amount of oil product. In this research, using a system based on the gamma-ray attenuation technique and the feature extraction technique in the frequency domain combined with a Multilayer Perceptron (MLP) neural network, an attempt has been made to determine the type and amount of four petroleum products. The implemented system consists of a dual-energy gamma source, a test pipe to simulate petroleum products, and a sodium iodide detector. The signals received from the detector were transmitted to the frequency domain, and the amplitudes of the first to fourth dominant frequency were extracted from them. These characteristics were given to an MLP neural network as input. The designed neural network has four outputs, which is the percentage of the volume ratio of each product. The proposed system has the ability to predict the volume ratio of products with a maximum root mean square error (RMSE) of 0.69, which is a strong reason for the use of this system in the oil industry.