This study aims to test the performances of a low-cost and automatic phenotyping platform, consisting of a Red-Green-Blue (RGB) commercial camera scanning objects on rotating plates and the reconstruction of main plant phenotypic traits via the structure for motion approach (SfM). The precision of this platform was tested in relation to three-dimensional (3D) models generated from images of potted maize, tomato and olive tree, acquired at a different frequency (steps of 4°, 8° and 12°) and quality (4.88, 6.52 and 9.77 µm/pixel). Plant and organs heights, angles and areas were extracted from the 3D models generated for each combination of these factors. Coefficient of determination (R²), relative Root Mean Square Error (rRMSE) and Akaike Information Criterion (AIC) were used as goodness-of-fit indexes to compare the simulated to the observed data. The results indicated that while the best performances in reproducing plant traits were obtained using 90 images at 4.88 µm/pixel (R² = 0.81, rRMSE = 9.49% and AIC = 35.78), this corresponded to an unviable processing time (from 2.46 h to 28.25 h for herbaceous plants and olive trees, respectively). Conversely, 30 images at 4.88 µm/pixel resulted in a good compromise between a reliable reconstruction of considered traits (R² = 0.72, rRMSE = 11.92% and AIC = 42.59) and processing time (from 0.50 h to 2.05 h for herbaceous plants and olive trees, respectively). In any case, the results pointed out that this input combination may vary based on the trait under analysis, which can be more or less demanding in terms of input images and time according to the complexity of its shape (R² = 0.83, rRSME = 10.15% and AIC = 38.78). These findings highlight the reliability of the developed low-cost platform for plant phenotyping, further indicating the best combination of factors to speed up the acquisition and elaboration process, at the same time minimizing the bias between observed and simulated data.

Improving the tolerance of crop species to abiotic stresses that limit plant growth and productivity is essential for mitigating the emerging problems of global warming. In this context, imaged data analysis represents an effective method in the 4.0 technology era, where this method has the non-destructive and recursive characterization of plant phenotypic traits as selection criteria. So, the plant breeders are helped in the development of adapted and climate-resilient crop varieties. Although image-based phenotyping has recently resulted in remarkable improvements for identifying the crop status under a range of growing conditions, the topic of its application for assessing the plant behavioral responses to abiotic stressors has not yet been extensively reviewed. For such a purpose, bibliometric analysis is an ideal analytical concept to analyze the evolution and interplay of image-based phenotyping to abiotic stresses by objectively reviewing the literature in light of existing database. Bibliometricy, a bibliometric analysis was applied using a systematic methodology which involved data mining, mining data improvement and analysis, and manuscript construction. The obtained results indicate that there are 554 documents related to image-based phenotyping to abiotic stress until 5 January 2023. All document showed the future development trends of image-based phenotyping will be mainly centered in the United States, European continent and China. The keywords analysis major focus to the application of 4.0 technology and machine learning in plant breeding, especially to create the tolerant variety under abiotic stresses. Drought and saline become an abiotic stress often using image-based phenotyping. Besides that, the rice, wheat and maize as the main commodities in this topic. In conclusion, the present work provides information on resolutive interactions in developing image-based phenotyping to abiotic stress, especially optimizing high-throughput sensors in image-based phenotyping for the future development.

Olive tree cultivation is currently a dominant agriculture activity in the Mediterranean basin, where the increasing impact of climate change coupled with the inefficient management of olive groves is negatively affecting olive oil production and quality in some marginal areas. In this context, satellite imagery may help to monitor crop growth under different environmental conditions, thus providing useful information for optimizing olive grove management and final production. However, the spatial resolution of freely-available satellite products is not yet adequate to estimate plant biophysical parameters in complex agroecosystems such as olive groves, where both olive trees and grass cover contribute to the vegetation indices (VIs) signal at pixel scale. The aim of this study is therefore to test a disentangling procedure to partition the VIs signal among the different components of the agroecosystem to use this information for the monitoring of olive growth processes during the season. Specifically, five VIs (GEMI, MCARI2, NDVI, OSAVI, MCARI2/OSAVI) as recorded by Sentinel-2 at a spatial resolution of 10 m over five olive groves in the Montalbano area (Tuscany, Central Italy), were tested as a proxy for olive tree intercepted radiation. The olive tree volume per pixel was initially used to linearly rescale the VIs signal into the relevant value for the grass cover and olive trees. The models, describing the relationship between rescaled VIs and observed fraction of Photosynthetically Active Radiation (fPAR), were fitted and then validated against independent datasets. While in the calibration phase, a greater robustness at predicting fPAR was obtained using NDVI (r = 0.96 and RRMSE = 9.86), the validation results demonstrating that GEMI and MCARI2/OSAVI provided the highest performances (GEMI: r = 0.89 and RRMSE = 21.71; MCARI2/OSAVI: r = 0.87 and RRMSE = 25.50), in contrast to MCARI2 that provided the lowest (r = 0.67 and RRMSE = 36.78). These results may be related to the VIs’ intrinsic features (e.g., lower sensitivity to atmosphere and background effects), which make some of these indices, compared to others, less sensitive to saturation effects by improving fPAR estimation (e.g., GEMI vs. NDVI). On this basis, this study evidenced the need to improve the current methodologies to reduce inter-row effects and select appropriate VIs for fPAR estimation, especially in complex agroecosystems where inter-row grass growth may affect remote sensed-derived VIs signal at an inadequate pixel resolution.

Relative soil water content (RSWC) is widely used to characterize the impact of water stress (WS) on vegetation. In bi-layer ecosystems, such as olive groves, this impact must be primarily estimated for the tree component, which, having greater rooting depth, responds more slowly to WS than understory grass. This complicates the application of methods for RSWC prediction, which must be properly adapted to consider the deeper soil layer influential on olive trees. The current study investigates the modification of a recently proposed RSWC simulation method based on a combination of meteorological and satellite-derived normalized difference vegetation index (NDVI) data. The application of the method to an olive grove in Central Italy requires the estimation of both weather and NDVI contributions affecting solely olive trees, which is carried out through the use of appropriate data processing techniques. The RSWC estimates obtained reasonably reproduce the ground RSWC observations referred to the 1 m soil layer, which are representative of the WS affecting olive trees (r² = 0.795, RMSE = 0.15 and MBE = −0.09). The limits and prospects of this method are finally discussed with particular reference to the possible integration of the RSWC estimates within more complex ecosystem models.