Semiempirical equations of state (EoS) of Au, Pt, MgO, NaCl-B1, and NaCl-B2 based on expanded Mie–Grüneisen–Debye approach, which are consistent both with the Mie–Grüneisen–Bose–Einstein approach and the thermochemical, X-ray, ultrasonic and shock-wave data in a wide pressure-temperature range, have been constructed. It is shown that to determine the volume dependence of the Grüneisen parameter, not only shock-wave and static compression data, but also experimental information on heat capacity, bulk moduli, volume, and thermal expansion coefficient at zero pressure need to be taken into account. Intrinsic anharmonicity is of great importance at construction of EoS at high temperatures and x=V/V0>1. Cross-comparison of the current equations of state with independent measurements shows that these EoS may be used as the internally consistent and independent pressure scales in a wide range of temperatures and pressures.
We have constructed semiempirical equations of state of Al, Au, Cu, Pt, Ta, and W, which within experimental error bars describe the available shock-wave, ultrasonic, x-ray, and thermochemical data in the temperature range from up to the melting temperature and to compression . The comparison of the calculated room-temperature isotherms for these metals with quasihydrostatic measurements supports recently proposed ruby pressure scales. We recommend a new ruby pressure scale in the form with parameters and . The cross check on independent data confirms the obtained PVT equations of state of Ag, Al, Au, Cu, Pt, Ta, W, , and diamond. The equations of state of these materials obtained here provide accurate and versatile means for calibrating pressure at all temperatures below the melting point. Furthermore, they can be used for accurate tabulation of thermodynamic properties (heat capacities, entropies) of these reference substances in a wide P-T range.
The equations of state for solid (with bcc, fcc, and hcp structures) and liquid phases of Fe were defined via simultaneous optimization of the heat capacity, bulk moduli, thermal expansion, and volume at room and higher temperatures. The calculated triple points at the phase diagram have the following parameters: bcc–fcc–hcp is located at 7.3 GPa and 820 K, bcc–fcc–liquid at 5.2 GPa and 1998 K, and fcc–hcp–liquid at 106.5 GPa and 3787 K. At conditions near the fcc–hcp–liquid triple point, the Clapeyron slope of the fcc–liquid curve is dT/dP = 12.8 K/GPa while the slope of the hcp–liquid curve is higher (dT/dP = 13.7 K/GPa). Therefore, the hcp–liquid curve overlaps the metastable fcc–liquid curve at pressures of about 160 GPa. At high-pressure conditions, the metastable bcc–hcp curve is located inside the fcc-Fe or liquid stability field. The density, adiabatic bulk modulus and P-wave velocity of liquid Fe calculated up to 328.9 GPa at adiabatic temperature conditions started from 5882 K (outer/inner core boundary) were compared to the PREM seismological model. We determined the density deficit of hcp-Fe at the inner core boundary (T = 5882 K and P = 328.9 GPa) to be 4.4%.