In High-Intensity Heavy Ion Accelerator Facility (HIAF), a high precision timing system is necessary because highly synchronous triggering of distributed power supply (PS) is essential for the facility operation. To obtain a cost-effective local area timing system, a nanosecond-accuracy private synchronization approach based on IEEE 1588 protocol is proposed. Instead of Ethernet protocol usually used, universal asynchronous transceiver protocol over dedicated optical fiber is applied in the method to avoid the uncertain delay in Ethernet architecture. Besides, the timing system simplifies the communication message formats and increases synchronization frequency to 1 kHz to reduce the timing deviation due to oscillator frequency deviation. The test results show that the implementation ensures a synchronization accuracy of better than ±10 ns with 2 ppm temperature-compensation crystal oscillator (TCXO) for dozens of distributed PS controllers.
14 August 2019 in IEEE Transactions on Industrial Electronics
This article introduces the analytic modeling optimal control method in details, aiming at solving special control problems of pulsed power supply for heavy-ion accelerator magnet. These problems include variable waveform, high speed, high precision, and wide dynamic range. To meet these requirements, this method has been proposed as a new choice. The mathematical model is analytic function, which is concerned with the continuous dynamics during topology switching period. Moreover, based on the analytic function, the optimal duty cycle can be calculated by high-performance controller. In simulations, compared with PID regulation, this method has a better ability to track a reference waveform which has a wide dynamic range. Meanwhile, we have made simulations with two magnets and four reference waveforms. The current can be controlled to the reference value at the end of each switching cycle. In experiments, the current of power supply can track above four reference waveforms and the maximum rate of current change is 8000 A/s. There is an excellent agreement between the results of experiments and simulations. Therefore, this control method has been verified.
9 January 2015 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
We describe a new modular cascaded H-bridge high power accelerator dipole magnet pulse power supply for the HIRFL-CSRm (Heavy Ion Research Facility in Lanzhou-Cooler-Storage-Ring main ring). The power supply consists of two branches connected in parallel, each of which consists of four 360V/1800A power units connected in series. Each power unit utilizes modular high power density voltage sources in parallel for AC/DC converter and cascaded H-bridges for DC/DC converter. In addition, digital control strategies are implemented. The voltage source modules adopt voltage and current dual closed-loop control, and the cascaded H-bridges employ current dual closed-loop control with frequency doubling modulation and cascaded multilevel control. The effectiveness of the proposed topology scheme and control strategies is confirmed through experiments, and the thermal stability of the power supply is verified through 72-hour continuous output experiments.
The contribution of this paper is putting forward a kind of ion accelerator magnet excitation power supply with bidirectional reduced matrix converter (BRMC) as well as a coordination control strategy with bipolar current space vector modulation strategy, which is utilized to realize bidirectional power flow for a BRMC system to solve problems such as low input power factor, large input current harmonics and no bidirectional energy in the conventional ion accelerator magnet excitation power supply. Meanwhile, a hybrid commutation strategy combining the simplified three-step commutation with zero vector commutation was proposed to solve the commutation problem for a matrix-type first stage in BRMC. The feasibility and effectiveness of the proposed strategy, which can achieve bidirectional energy flow and safer commutation, have been verified by the experimental results.