This paper compared three types of draft gears with different damping mechanisms: friction, polymer and friction–polymer. Impact characteristics, frequency responses, in-train characteristics and fatigue damage for these draft gears were compared. Wagon impact simulations show that the friction draft gear, polymer draft gear and the friction–polymer draft gear can withstand impact speeds of 9, 12 and 11 km/h, respectively. Comparisons of frequency responses show that the friction draft gear has higher stiffness at lower working velocities, while the polymer draft gear has lower stiffness at lower working velocities. The response of the friction–polymer draft gear is less sensitive to the working velocities as it blends the friction and polymer damping mechanisms and offsets their influences on draft gear forces. Train dynamics simulations show that the in-train characteristics of friction draft gears and polymer draft gears are similar to their static characteristics and very different from their impact characteristics. The in-train characteristics of the polymer draft gears have lower stiffness and lower damping abilities than the other two types of draft gears. The friction–polymer draft gears achieved better vehicle acceleration performance than the friction draft gears. The polymer draft gears achieved similar maximum accelerations throughout the train and the maximum accelerations were significantly lower than that of the other two types of draft gears. The polymer draft gears achieved 23.4% less fatigue damage than the friction draft gears; the fatigue damage of the friction–polymer case is only half that of the friction case.
6 April 2023 in Journal of Computational and Nonlinear Dynamics
In the research of rail vehicles, mechanism of curve passing is one of the hot spots, which essentially elucidates the conditions of vehicle curve passing and points out the direction for improving vehicle curve passing ability. As one of the new members of rail transportation, the curve passing capability of medium-low speed maglev directly affects its application and promotion in the field of rail transportation. In order to reveal the mechanism of curve passing for medium-low speed maglev, this paper first studies the necessary conditions for the conventional wheelset curve passing based on the mechanism of curve passing for the conventional wheelset. Second, on the basis of comparing the structure and motion relationship of the conventional wheelset, the independent wheelset and the magnetic wheelset (bogie of medium-low speed maglev), the theoretical derivation of the magnetic wheelset curve passing conditions are carried out to obtain its theoretical solution based on the curve passing conditions of the conventional wheelset. Finally, the conditions of curve passing for the magnetic wheelset are verified by dynamic simulation, and the mechanism of curve passing for the medium-low speed maglev bogie is revealed. Through the research, it can be found that: (1) The mechanism of curve passing for the magnetic wheelset is different from that of the traditional wheelset and the independent wheelset. The speed variance and regulating torque are the composite functions of running speed, curve radius, track gauge, superelevation, guiding stiffness and yaw angle of the magnetic wheelset. (2) When the magnetic wheelset passes through the curve, its motion posture switches between “” and “,” while the unilateral magnetic wheel shows a motion which is similar to “hunting.” (3) Ignoring the factors such as structure and irregularity, it can conduct that the curve capacity of the magnetic wheelset could be improved by increasing the curve radius, reducing the speed, curve superelevation and gauge to a certain extent. This study theoretically reveals the mechanism of curve passing for the medium-low speed maglev bogie, which provides a certain reference for the subsequent design of the medium-low speed maglev and the improvement of the medium-low speed maglev curve capacity.