Weihua Ma

Weihua Ma

Auto-generated profile, based on publicly available information

Weihua Ma

State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2017 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
KWKeren Wang
Keren Wang
SLShihui Luo
Shihui Luo
WMWeihua Ma
Weihua Ma
XCXiaohao Chen
Xiaohao Chen
A new type of walking mechanism for middle- and low-speed maglev vehicle, including a single anti-roll beam placed at the middle of each suspension frame, a big air spring placed at the middle of each longitudinal beam of each suspension module, and a forced steering mechanism canceled, was proposed to improve the comprehensive competitiveness of the middle- and low-speed maglev vehicle in the field of urban rail transit. The dynamic characteristics of a new-type maglev vehicle were investigated by dynamics simulation analysis. The following conclusions are drawn based on the obtained results: the new-type maglev vehicle meets the operational requirements at the running speed of 160 km/h on the straight line and at the running speed of 30 km/h on the curved track of radius 75 m.

30 January 2015 in Vehicle System Dynamics
Verified
Journal Article
Closed access
WLWei Liu
Wei Liu
WMWeihua Ma
Weihua Ma
SLShihui Luo
Shihui Luo
SZShengyang Zhu
Shengyang Zhu
Chongfeng WeiChongfeng Wei
Chongfeng Wei
This study mainly focuses on the mechanism of wheel tread spalling through wheelset longitudinal vibration that has been often neglected. Analysis of two actual cases of the wheel tread spalling problem leads to the conclusion that the wheel tread spalling is closely related to the wheelset longitudinal vibration in some locomotives, and many of these problems can be reasonably explained if the wheelset longitudinal vibration is considered. For better understanding of some abnormal wheel spalling problems, the formations of the wheelset longitudinal vibration and the wheel/rail contact parameters were analysed in the initial wheel tread spalling. With the preliminary analytical results, the wheelset longitudinal dynamic behaviour, the characteristics of wheel/rail contact and the mechanics in the condition of the wheelset longitudinal vibration were further studied quantitatively. The results showed that the wheelset longitudinal vibration changed not only the limit of these parameters and the position of principal stress, but also the direction of the principal stress on the surface of wheel/rail contact patch. It is likely that the significant stress changes provoke too much stress on the surface of wheel/rail contact patch, cause fatigue in wheel/rail contact patch and eventually lead to wheel tread spalling. The results of these studies suggest that the suppression of the wheelset longitudinal vibration extends wheel/rail life and the addition of a vertical damper with an ahead angle provides a possible solution to the wheel spalling problem.

4 May 2018 in Australian Journal of Mechanical Engineering
Verified
Journal Article
Closed access
KWKeren Wang
Keren Wang
WMWeihua Ma
Weihua Ma
SLShihui Luo
Shihui Luo
RZRuiming Zou
Ruiming Zou
XLXin Liang
Xin Liang
In order to investigate the effect of inner loop current gain coefficient, time lag and levitation current perturbation on the static suspension stability for the maglev vehicle, a vertical vibration model of HSST-type maglev train with five suspension frames was established. The following conclusions are drawn based on the obtained results: for suppressing vehicle-guideway coupling vibration, the gain coefficient of the inner loop should take a large value in the double loop control, such as a value of 300. If one suspension controller has a large time constant delay, such as a value of 4 ms, and the suspension instability will occur for the vehicle. When the levitation current has a large range perturbation, such as a value of 50%, increasing the control frequency of the levitation controller can suppress the vehicle-guideway coupling vibration of the maglev system to a certain extent.

4 May 2018 in Australian Journal of Mechanical Engineering
Verified
Journal Article
Closed access
RZRuiming Zou
Ruiming Zou
WMWeihua Ma
Weihua Ma
SLShihui Luo
Shihui Luo
Railway vehicles will inevitably appear wheel diameter difference, which will result in an unsymmetrical contact of wheel and rail. Take the guide wheelset for example, analysed the influence of the wheel diameter difference on the wheelset loading state and movement patterns in detail. Based on it, the train model which make up of 2(B0–B0) axle type locomotives + C80 wagon were set up. The effect of wheel diameter difference on the dynamic wheel/rail contact relation under coasting condition as well as dynamic braking condition were analyzed. Simulation results show that the wheel diameter difference will change the wheel/rail dynamic contact relation and aggravate the wear of wheel/rail profile. The influence of wheel diameter difference in anti phase on the wheel/rail lateral force is bigger than that in same phase. Compare with coasting condition, the wheel/rail lateral force of smaller wheel will increase and the wheel/rail lateral force of bigger wheel will decrease under dynamic braking condition, the wheelset lateral force under dynamic braking condition is relatively smaller than coasting condition. Wheel diameter difference will cause the partial wear of wheelset under dynamic braking condition, and this will increase the wheel diameter difference further.

6 April 2023 in Journal of Computational and Nonlinear Dynamics
Verified
Journal Article
Closed access
PDF file
BWBo Wang
Bo Wang
SLShihui Luo
Shihui Luo
JLJing Liu
Jing Liu
WMWeihua Ma
Weihua Ma
JXJie Xu
Jie Xu
In the research of rail vehicles, mechanism of curve passing is one of the hot spots, which essentially elucidates the conditions of vehicle curve passing and points out the direction for improving vehicle curve passing ability. As one of the new members of rail transportation, the curve passing capability of medium-low speed maglev directly affects its application and promotion in the field of rail transportation. In order to reveal the mechanism of curve passing for medium-low speed maglev, this paper first studies the necessary conditions for the conventional wheelset curve passing based on the mechanism of curve passing for the conventional wheelset. Second, on the basis of comparing the structure and motion relationship of the conventional wheelset, the independent wheelset and the magnetic wheelset (bogie of medium-low speed maglev), the theoretical derivation of the magnetic wheelset curve passing conditions are carried out to obtain its theoretical solution based on the curve passing conditions of the conventional wheelset. Finally, the conditions of curve passing for the magnetic wheelset are verified by dynamic simulation, and the mechanism of curve passing for the medium-low speed maglev bogie is revealed. Through the research, it can be found that: (1) The mechanism of curve passing for the magnetic wheelset is different from that of the traditional wheelset and the independent wheelset. The speed variance and regulating torque are the composite functions of running speed, curve radius, track gauge, superelevation, guiding stiffness and yaw angle of the magnetic wheelset. (2) When the magnetic wheelset passes through the curve, its motion posture switches between “” and “,” while the unilateral magnetic wheel shows a motion which is similar to “hunting.” (3) Ignoring the factors such as structure and irregularity, it can conduct that the curve capacity of the magnetic wheelset could be improved by increasing the curve radius, reducing the speed, curve superelevation and gauge to a certain extent. This study theoretically reveals the mechanism of curve passing for the medium-low speed maglev bogie, which provides a certain reference for the subsequent design of the medium-low speed maglev and the improvement of the medium-low speed maglev curve capacity.

1 January 2017 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Verified
Journal Article
Closed access
SYShi Yan
Shi Yan
WMWeihua Ma
Weihua Ma
In this paper, the design concept of a new type of asymmetric forced-steering bogie has been proposed. This bogie is supposed to produce a better curving performance than the self-steering bogies and is well suited for mounting on locomotives that have limited bottom space. Schemes A and B, the only feasible schemes for vehicles with two bogies, were adopted and compared with the self-steering bogies. SIMPACK,the dynamics simulation software, was used to establish the dynamics models of the locomotives. The lead wheel angle of attack, lead wheel lateral force, lead wheel wear power, and the total vehicle wear power were compared and analyzed when the three different bogies negotiate the curves. The results showed that the performance of the locomotives is closely related to the layout of the front and rear asymmetric forced-steering bogies; in scheme A, where the front and rear bogies are antisymmetrically placed, curve negotiation performance was excellent and notably superior to the self-steering bogies – especially on curves that have small and medium radius. Under the traction condition, the total vehicle wear power in scheme A can be reduced by up to 24.6% compared to the locomotives of the self-steering bogies. An experiment on an S-shaped curve has proved that the angle of attack and total vehicle wear power of all the three schemes retained the symmetrical dynamics performance.