The extensive use of electrical equipment and portable electronics has aroused major concerns about electromagnetic pollution. Carbon-based polymer composites are widely used in the electromagnetic interference (EMI) shielding field, motivated by their excellent performance. However, the dispersibility between carbon materials and polymers is poor. A large number of researchers used interface design to solve this problem. This article reviews the research on the interface design of carbon filler/polymer composites to enhance EMI shielding performance, and the interface design methods are systematically summarized. After a brief introduction, in Section 1, the EMI shielding mechanism will be briefly discussed in Section 2 to lay the foundation for designing a high-efficiency carbon filler/polymer composite interface. These interface design methods and mechanisms will be discussed in detail in the next section, including interface layer introduction, surface modification of fillers, and in situ polymerization. On the topic of Section 4, the current research on the interface design of carbon filler/polymer composites will be discussed to improve EMI shielding performance of the materials. In the final section, recommendations for further research are put forward, emphasizing that the carbon filler/polymer composites require specific investigations to evaluate interface properties.
This study aims to explore the role of graphene in enhancing the radiation resistance of epoxy resin (EP) composites. Through the resin transfer molding process, we prepared 0.3 wt% graphene oxide (GO) and Hummer’s method reduced graphene oxide (Hh-RGO) reinforced EP composites, respectively. By comparing the microstructure, free radical content, thermal stability, and mechanical properties of EP, GO/EP, and Hh-RGO/EP composites before and after γ-ray irradiation, we found that GO and Hh-RGO can effectively reduce the generation of free radicals in EP during irradiation, thereby reducing chemical bond breakage and enhancing its radiation resistance. Particularly, GO demonstrated stronger radiation damage resistance. The results showed that after γ-ray irradiation, the glass transition temperature, nano-indentation depth, and hardness of GO/EP composites decreased by 20.32%, 416.3 nm, and 16.00%, respectively, whereas EP decreased by 30.34%, 502.1 nm, and 41.82% respectively. This is mainly attributed to the fact that the addition of graphene nanoparticles as a reinforcement reduces the free radical content in EP and reduces the damage of free radicals to the EP crosslinked network during irradiation, thereby improving the thermal stability and mechanical properties of the composites. In addition, the Π electrons formed by the hexagonal honeycomb structure of GO and the Π-Π stacking effect formed with free radicals can slow down the aging of epoxy resin in a high-energy radiation environment, thereby prolonging its service life. This study provides important references for further optimization and application of graphene-modified epoxy resin.
Amidst the escalating demand for high-precision structural health monitoring in large-scale engineering applications, carbon fiber-reinforced polymer fiber Bragg grating (CFRP-FBG) sensors have emerged as a pivotal technology for fatigue life evaluation, owing to their exceptional sensitivity and intrinsic immunity to electromagnetic interference. A time-series predictive architecture based on long short-term memory (LSTM) networks is developed in this work to facilitate intelligent fatigue life assessment of structures subjected to complex cyclic loading by capturing and modeling critical spectral characteristics of CFRP-FBG sensors, specifically the side-mode suppression ratio and main-lobe peak-to-valley ratio. To enhance model robustness and generalization, Principal Component Analysis (PCA) was employed to isolate the most salient spectral features, followed by data preprocessing via normalization and model optimization through the integration of the Adam optimizer and Dropout regularization strategy. Relative to conventional Backpropagation (BP) neural networks, the LSTM model demonstrated a substantial improvement in predicting the side-mode suppression ratio, achieving a 61.62% reduction in mean squared error (MSE) and a 34.99% decrease in root mean squared error (RMSE), thereby markedly enhancing robustness to outliers and ensuring greater overall prediction stability. In predicting the peak-to-valley ratio, the model attained a notable 24.9% decrease in mean absolute error (MAE) and a 21.2% reduction in root mean squared error (RMSE), thereby substantially curtailing localized inaccuracies. The forecasted confidence intervals were correspondingly narrower and exhibited diminished fluctuation, highlighting the LSTM architecture’s enhanced proficiency in capturing nonlinear dynamics and modeling temporal dependencies. The proposed method manifests considerable practical engineering relevance and delivers resilient intelligent assistance for the seamless implementation of CFRP-FBG sensor technology in structural health monitoring and fatigue life prognostics.