To characterize the interfacial microstructure and interaction at a nanoscale has a significant meaning for the interface improvement of the nanocomposites. In this study, the interfacial microstructure and features of aligned multiwalled carbon nanotube (MWNT) and conjugated polymer polyimide (PI) with three molecular structures were investigated using small-angle X-ray scattering (SAXS), wide-angle X-ray diffraction (WAXD), and fluorescence emission spectroscopy. It was found that aligned MWNT/PI nanocomposites had a nonideal two-phase system with the interfaces belonging to long period stacking ordered structure. Attributed to the π–π stacking effect, MWNT/BTDA-MPD presented the most regular arrangement verified by fractal dimension. By adopting a one-dimension correlation function, each phase dimension in aligned MWNT/PI nanocomposites was calculated and verified by high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The π–π stacking was demonstrated to be an important interaction between MWNT and PI via WAXD and fluorescence emission spectroscopy, and it was influenced by the linkage bond between benzene rings in PIs. This work is of significance to reveal the interfacial features between conjugated polymer and carbon nanotubes (CNTs), which is favorable for the interface design of CNT-based high performance nanocomposites.

With molecular dynamics simulations, nanocomposites were characterized that are comprised of a polyimide (PI) polymer and carbon nanotubes (CNTs) with the same outer diameter but with one, two, or three walls. The simulations indicate that the PI/CNT interaction is strong, regardless of the number of CNT walls, and that there is some degree of alignment of the PI chains near the CNT interface. As the number of CNT walls increased, the density of PI chains near the CNT interface also increased and the average radius of gyration of the PI chains decreased, and these observations were attributed to changes due to the intertube van der Waals interactions. From simulations of the constant force pullout process of the CNT from the PI matrix, the limiting pullout force was calculated to be higher for the triple-walled CNT than for the single-walled one. The interfacial shear strength of the nanocomposites was also calculated from the pullout energy, and the results indicate that increasing the number of walls is a critical factor for enhancing the interfacial stress transfer during tension.

Poly (vinylidene fluoride) (PVdF) ultrafine porous fiber membranes with a three-dimensional network structure, high porosity and electrolyte uptake are prepared via a blend electrospinning and phase separation process under ultrasonic-assisted vibration. The structure and morphology of PVdF fiber membranes are investigated by the scanning electron microscope and porous structure parameter analyzer. The electrochemical performances of supercapacitor constructed with PVdF ultrafine porous fiber membrane as separator-cum-electrolyte are investigated. PVdF ultrafine porous fiber membranes possess high electrolyte uptake (360 wt%) and wide electrochemical stability windows (0.0 to 3.3 V). The activated electrode supercapacitor constructed by PVdF ultrafine porous fiber separator-cum-electrolyte exhibits superior specific capacity (39.5 F·g⁻¹) even under high current density (100 mA·g⁻¹).