Increasing year-by-year vehicle production is related to the expanding volume of used tires; therefore, exploring waste management strategies is strongly recommended. The global tire market reached 2.27 billion units in 2021 and is expected to reach 2.67 billion units by 2027. Dumping tires in landfills can cause significant environmental impacts, so waste tire utilisation plays an important role. Predominantly, the following three directions are employed for waste tire disposal: retreading, energy recovery and material recovery. The review shows that used tires can remove environmental pollution from both aqueous solutions containing heavy metal ions, dyes, pharmaceutical compounds, and benzene, toluene, ethylbenzene and xylene (BTEX). Particularly high efficiency was achieved in the removal of dyes (72%), taking into account the high initial concentration of impurities. The adsorption process depends on multiple factors, including, in particular, the following: pH, initial concentration of pollution, contact time and the properties of the sorbent used. The optimal pH range was identified to be between 6 and 7. Considering the principles of circular economy as well as based on the current state of knowledge, it can be concluded that the solid fraction obtained from the combustion of waste tires can be practically utilised for various environmental purposes.
1 September 2017 in International Journal of Mineral Processing
The fly ashes (Class F and C) have been successfully used as the main substrates in the hydrothermal syntheses of Na-A, Na-P1, Na-X and sodalite zeolites. Both ashes and their derivatives after milling with magnetic field grinder were used. The paper investigates the effect of fly ash fraction size on the syntheses efficiency and physicochemical properties of the obtained zeolites. The starting material and obtained zeolites were subjected to physicochemical characteristics using X-ray diffraction, X-ray fluorescence, particle size analysis, and scanning electron microscopy methods. The paper showed a significant effect of the used fly ash fractions on the quantity, purity, quality and level of crystallinity of the zeolites phase obtained. The application of the grinding process prior to the syntheses of zeolites, with a relatively small financial outlay, significantly increases their application potential. Obtained zeolites are a promising material in the context of their use, inter alia, in environmental protection. Graphic
Coal combustion product in the form of fly ash has been sieved and successfully utilised as a main substrate and a carrier of silicon and aluminium in a set of hydrothermal syntheses of zeolites. The final product was abundant in zeolite X phase (Faujasite framework). Raw fly ash as well as its derivatives, after being sieved (fractions: ≤ 63, 63–125, 125–180 and ≥ 180 µm), and the obtained zeolite materials were subjected to mineralogical characterisation using powder X-ray diffraction, energy-dispersive X-ray fluorescence, laser diffraction-based particle size analysis and scanning electron microscopy. The influence of fraction separation on the zeolitization process under hydrothermal synthesis was investigated. Analyses performed on the derived zeolite X samples revealed a meaningful impact of the given fly ash fraction on synthesis efficiency, chemistry, quality as well as physicochemical properties, while favouring a given morphological form of zeolite crystals. The obtained zeolites possess great potential for use in many areas of industry and environmental protection or engineering.