The research reports the development of geometrical models of woven fabric structures and evaluation of fabric thermal properties by using finite element method. A mesoscopic scale modelling approach was used to investigate the effective thermal conductivity and thermal resistance of woven textile structures. Various techniques, including scanning electron microscopy and experimental methods, have been adopted to obtain the actual three-dimensional parameters of the fabrics for finite element analysis. The research revealed that the thermal anisotropy of fibres, fibres material orientation and temperature-dependent thermal conductivity of fibre has a significant impact on the effective thermal conductivity of fabrics because experimental and simulated results were highly correlated with the consideration of above-mentioned factors.
10 April 2018 in Clothing and Textiles Research Journal
The thermophysical properties of textile materials are very important in helping to understand the thermal comfort of fabrics for clothing and technical textiles. An experimental setup for the measurement of the thermal conductivity of fabrics was developed based on the heat flow meter principle. The setup was considered highly accurate and reliable based on the low absolute error, high correlation coefficient, and the coefficient of determination between the results from the setup and commercially available devices. The setup is easy to use for testing any textile-based materials and their composites.
Nonwoven fabric can be produced for thermal insulation. It has low fibre volume fraction. Thermal insulation property of fibrous materials depends on not only the thermal conductivity of fibre but also the entrapped static air. If fibre volume fraction is low in fibrous assembly it means that more air in the volume, therefore, the insulation property of the fabric increases, or vice versa. In this research thermal bonded nonwoven fabrics were used to analyse the heat transfer phenomena and predict the effective thermal conductivity and thermal resistance by using finite element method. Finite element models of nonwoven fabrics were created by two techniques: 3D reconstruction and solid modelling. For validation purpose, the effective thermal conductivity results obtained from an in-house developed instrument were compared with predicted results from the developed finite element models. Furthermore, this research work also contains an investigation of the effect of fibre volume fraction and thermal conductivity of fibre on the overall heat transfer of nonwoven structures.
Air permeability is one of the very important factors which need to be considered at the development stage of textile fabrics because it affects the comfort of the clothing. During normal and extreme environmental conditions human body releases heat and the heat can be controlled by the air exchange between the body and clothing microclimate and the external environment; the exchange phenomena depends on the air permeability of the fabric. The air permeability of fabric can be evaluated by both the experimental and computational methods. In this work, a computational method is used for the prediction of air permeability of fabrics. The geometrical model of weft knitted structures was generated by using the actual dimensional parameters of the fabric and was further analysed by applying appropriate boundary conditions. The simulated results obtained from computational analysis were compared to the experimental results. Furthermore, the validated models were further used to predict and analyse the effect of stitch length, stitch density and fibre volume fraction on the air permeability of the fabric.
18 February 2017 in Journal of Thermal Analysis and Calorimetry
The effective thermal conductivity and air permeability of a multifilament polyester yarn used in sports T-shirts was investigated by computer modeling using finite element analysis. It has been shown that the number of fibers, the porosity of the yarn and the proportion of fibers in the volume fraction of the yarn have a direct effect on the effective thermal conductivity and air permeability of the multifilament yarn. It was found that with the increase in the number of fibers, the porosity of the yarn decreases linearly, while the volume fraction of the fibers increases, and thus the effective thermal conductivity increases. In addition, air permeability decreases exponentially.