Air pollution is one of the biggest health and environmental problems in the world and a huge threat to human health on a global scale. Due to the great impact of respiratory viral infections, chronic obstructive pulmonary disease, lung cancer, asthma, bronchitis, emphysema, lung disease, and heart disease, respiratory allergies are increasing significantly every year. Because of the special properties of electrospun nanofiber mats, e.g., large surface-to-volume ratio and low basis weight, uniform size, and nanoporous structure, nanofiber mats are the preferred choice for use in large-scale air filtration applications. In this review, we summarize the significant studies on electrospun nanofiber mats for filtration applications, present the electrospinning technology, show the structure and mechanism of air filtration. In addition, an overview of current air filtration materials derived from bio- and synthetic polymers and blends is provided. Apart from this, the use of biopolymers in filtration applications is still relatively new and this field is still under-researched. The application areas of air filtration materials are discussed here and future prospects are summarized in conclusion. In order to develop new effective filtration materials, it is necessary to understand the interaction between technology, materials, and filtration mechanisms, and this study was intended to contribute to this effort.

The exchange bias (EB) is an effect occurring in coupled ferromagnetic/antiferromagnetic materials of diverse shapes, from core–shell nanoparticles to stacked nanostructures and thin films. The interface coupling typically results in a horizontal—often also vertical—shift of the hysteresis loop, combined with an increased coercivity, as compared to the pure ferromagnet, and the possibility of asymmetric hysteresis loops. Several models have been developed since its discovery in 1956 which still have some drawbacks and some unexplained points, while exchange bias systems are at the same time being used in hard drive read heads and are part of highly important elements for spintronics applications. Here, we give an update of new theoretical models and experimental findings regarding exchange bias phenomena in thin films during the last years, including new material combinations in which an exchange bias was found.

Microelectromechanical systems (MEMS) are of high interest for recent electronic applications. Their applications range from medicine to measurement technology, from microfluidics to the Internet of Things (IoT). In many cases, MEMS elements serve as sensors or actuators, e.g., in recent mobile phones, but also in future autonomously driving cars. Most MEMS elements are based on silicon, which is not deformed plastically under a load, as opposed to metals. While highly sophisticated solutions were already found for diverse MEMS sensors, actuators, and other elements, MEMS fabrication is less standardized than pure microelectronics, which sometimes blocks new ideas. One of the possibilities to overcome this problem may be the 3D printing approach. While most 3D printing technologies do not offer sufficient resolution for MEMS production, and many of the common 3D printing materials cannot be used for this application, there are still niches in which the 3D printing of MEMS enables producing new structures and thus creating elements for new applications, or the faster and less expensive production of common systems. Here, we give an overview of the most recent developments and applications in 3D printing of MEMS.

Biosignals often have to be detected in sports or for medical reasons. Typical biosignals are pulse and ECG (electrocardiogram), breathing, blood pressure, skin temperature, oxygen saturation, bioimpedance, etc. Typically, scientists attempt to measure these biosignals noninvasively, i.e., with electrodes or other sensors, detecting electric signals, measuring optical or chemical information. While short-time measurements or monitoring of patients in a hospital can be performed by systems based on common rigid electrodes, usually containing a large amount of wiring, long-term measurements on mobile patients or athletes necessitate other equipment. Here, textile-based sensors and textile-integrated data connections are preferred to avoid skin irritations and other unnecessary limitations of the monitored person. In this review, we give an overview of recent progress in textile-based electrodes for electrical measurements and new developments in textile-based chemical and other sensors for detection and monitoring of biosignals.

Conductive nanofiber mats can be used in a broad variety of applications, such as electromagnetic shielding, sensors, multifunctional textile surfaces, organic photovoltaics, or biomedicine. While nanofibers or nanofiber from pure or blended polymers can in many cases unambiguously be prepared by electrospinning, creating conductive nanofibers is often more challenging. Integration of conductive nano-fillers often needs a calcination step to evaporate the non-conductive polymer matrix which is necessary for the electrospinning process, while conductive polymers have often relatively low molecular weights and are hard to dissolve in common solvents, both factors impeding spinning them solely and making a spinning agent necessary. On the other hand, conductive coatings may disturb the desired porous structure and possibly cause problems with biocompatibility or other necessary properties of the original nanofiber mats. Here we give an overview of the most recent developments in the growing field of conductive electrospun nanofiber mats, based on electrospinning blends of spinning agents with conductive polymers or nanoparticles, alternatively applying conductive coatings, and the possible applications of such conductive electrospun nanofiber mats.

Electrospun nanofiber mats may serve as new hardware for neuromorphic computing. To enable data storage and transfer in them, they should be magnetic, possibly electrically conductive and able to respond to further external impulses. Here we report on creating magnetic nanofiber mats, consisting of magnetically doped polymer nanofibers for data transfer and polymer beads containing larger amounts of magnetic nanoparticles for storage purposes. Using magnetite and iron nickel oxide nanoparticles, a broad range of doping ratios could be electrospun with a needleless technique, resulting in magnetic nanofiber mats with varying morphologies and different amounts of magnetically doped beads.