This paper proposes a Barker coded excitation for defect detection using infrared non-destructive testing. Capability of the proposed excitation scheme is highlighted with recently introduced correlation based post processing approach and compared with the existing phase based analysis by taking the signal to noise ratio into consideration. Applicability of the proposed scheme has been experimentally validated on a carbon fiber reinforced plastic specimen containing flat bottom holes located at different depths.
This letter proposes an optimal nondestructive subsurface defect detection method to investigate the capabilities of the infrared thermography through a finite-element analysis-based model. A finite-element analysis (FEA) software was used to generate models and analysis was carried out using MATLAB software. Pulse compression approach has been introduced for subsurface defect detection and its advantages and limitations are compared with existing phase approach-based thermography. Investigations has been carried out on a simulated plain carbon steel specimen with a flat bottom hole defects at various depths of different diameters is introduced. Comparison has been made with the conventional phase-based techniques.
9 September 2011 in Measurement Science and Technology
Active thermal non-destructive testing (TNDT) methods utilise the acquired surface temperature profile over an object and subsequently process the obtained temperature data to detect surface or subsurface features of the object. This process, however, demands novel processing and excitation approaches to enhance the defect detectability with depth analysis. This contribution is intended to exhibit the detection capability of the recently introduced Barker coded excitation for infrared imaging for characterisation of carbon fibre-reinforced plastic material. Experiments have been carried out for the proposed excitation scheme to study its defect detection capabilities.