A novel electrochemical sensor based on electropolymerized ion imprinted poly (o-phenylenediamine) PoPD/electrochemical reduced graphene (ERGO) composite on glass carbon electrode (GCE) was fabricated for selective and sensitive determination of trace Cd(II) in water. ERGO was first deposited on the surface of GCE by electrochemical cyclic voltammetry (CV) scanning to enhance the electron transport activity at electrode surface. The ion imprinted polymer (IIP) of imprinted PoPD was then in situ electropolymerized on ERGO via CV scanning with oPD as functional monomer and Cd(II) ions as template, following removal of the template using electrochemical peroxidation method. The obtained imprinted PoPD/RERGO composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray energy spectroscopy (EDS) for the observation of their morphologies and components. The electrochemical behavior of the imprinted PoPD/ERGO/GCE was performed by CV and SWASV. The fabricated sensor of the imprinted PoPD/ERGO/GCE showed a good selectivity toward target Cd(II) ions in the presence of other heavy metal ions. Under the optimized experimental conditions, the sensor exhibited a good linear relationship between SWASV stripping peak values and Cd(II) concentration in the range of 1 to 50 ng/mL, with the limit of detection as 0.13 ng/mL (S/N = 3). The proposed electrochemical sensor of imprinted PoPD/ERGO/GCE was successfully applied for trace Cd(II) determination in real water samples.
Three-dimensional (3D) porous graphene-based materials have displayed attractive electrochemical catalysis and sensing performances, benefiting from their high porosity, large surface area, and excellent electrical conductivity. In this work, a novel electrochemical sensor based on 3D porous reduced graphene (3DPrGO) and ion-imprinted polymer (IIP) was developed for trace cadmium ion (Cd(II)) detection in water. The 3DPrGO was synthesized in situ at a glassy carbon electrode (GCE) surface using a polystyrene (PS) colloidal crystal template and the electrodeposition method. Then, IIP film was further modified on the 3DPrGO by electropolymerization to make it suitable for detecting Cd(II). Attributable to the abundant nanopores and good electron transport of the 3DPrGO, as well as the specific recognition for Cd(II) of IIP, a sensitive determination of trace Cd(II) at PoPD-IIP/3DPrGO/GCE was achieved. The proposed sensor exhibited comprehensive linear Cd(II) responses ranging from 1 to 100 μg/L (R2 = 99.7%). The limit of detection (LOD) was 0.11 μg/L, about 30 times lower than the drinking water standard set by the World Health Organization (WHO). Moreover, PoPD-IIP/3DPrGO/GCE was applied for the detection of Cd(II) in actual water samples. The satisfying recoveries (97–99.6%) and relative standard deviations (RSD, 3.5–5.7%) make the proposed sensor a promising candidate for rapid and on-site water monitoring.