Lamellar double hydroxides (LDH) with double divalent cations were synthesized by the co-precipitation method and studied in the multicomponent synthesis of 4H-pyrans. The solids obtained were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), N2 adsorption isotherms, and thermogravimetric analysis (TGA). The XRD patterns confirmed the formation of LDHs in which the incorporation of Ni2+ or Co2+ improves their crystalline and textural properties. The results of catalytic activity showed that the synthesis of 4H-pyrans is favored in solvent-free conditions with the LDH–Ni catalyst, avoiding calcination processes. In addition, it was found that hydrotalcite with double divalent cations can conduct this reaction through multicomponent synthesis or by the Michael addition reaction, which can be performed by different types of basicity that depend on the composition of another divalent cation in the brucite layer or a calcination process.
This work reports the influence of cationic charge on the magnetic response of hydrotalcites combined with magnetite nanoparticles. Fe 3 O 4 particles were synthesized by the co-precipitation method, and the resulting magnetic particles were dispersed. A mixture of Mg, Me (Ni, Co, Sr), and Al nitrates with stoichiometric Me 2+ /Me 3+ molar ratios of 2 and 3 was added. X-ray diffraction patterns revealed the presence of Fe 3 O 4 and hydrotalcite main phases and some secondary phases in the Sr 2+ -modified sample. The FTIR spectra provided information on the chemical structure of the materials and confirmed the presence of representative vibrational bands for the composite structure. N 2 adsorption–desorption isotherms analyzed by the BET method indicated remarkable porous properties for the synthesized samples, and higher surface areas of 160 and 145 m 2 /g were obtained for Fe 3 O 4 MgCoAl x = 3 and Fe 3 O 4 MgNiAl x = 3, respectively, with an increasing modifying cation ratio. The morphological characterization through SEM showed that a higher content of divalent cations favors the formation of larger particles, reaching a particle size of 786 nm for the sample with Ni 2+ addition. The magnetic measurements showed marked ferromagnetic behavior with variations in saturation and remanent magnetizations due to the influence of modifying cations. The analysis revealed a correlation between the cationic charge and the magnetic and structural properties of the hydrotalcites, suggesting effective control over the magnetic properties by manipulating the cationic charge in these composite materials.
The catalytic hydrogenation of furfural is a key reaction to valorize lignocellulosic biomass into value-added chemicals. In this work, the influence of different hydrogen donors on furfural hydrogenation under continuous-flow conditions was evaluated using a 10% Pd/C catalyst in a Phoenix Flow Reactor. Molecular hydrogen (H2), 2-propanol (transfer hydrogenation), and sodium borohydride (NaBH4) were tested under identical conditions (150 °C, 20 bar, 0.1 mL·min1). Each hydrogen source led to distinct reaction pathways and product distributions. H2 promoted selective formation of furfuryl alcohol (FA) via a Langmuir–Hinshelwood mechanism, with transient formation of tetrahydrofurfuryl alcohol (THFA). 2-propanol favored carbonyl reduction while enabling gradual formation of 2-methylfuran (2-MF) at longer reaction times. NaBH4 yielded FA exclusively through direct hydride transfer but showed operational limitations due to precipitation under flow conditions. Catalyst deactivation was observed in all systems, mainly associated with carbonaceous deposition. While H2 and 2-propanol showed comparable catalytic efficiency, NaBH4 exhibited lower efficiency and limited scalability. These results highlight the critical role of hydrogen donor selection in controlling reaction pathways, selectivity, and process feasibility in continuous-flow biomass valorization.