The microstructural evolution of an AZ31 rolled sheet during dynamic deformation at strain rates of ∼103 s−1 has been investigated by electron backscatter diffraction, X-ray and neutron diffraction. The influence of orientation on the predominant deformation mechanisms and on the recovery processes taking place during deformation has been systematically examined. The results have been compared with those corresponding to the same alloy tested quasi-statically under equivalent conditions. It has been found that strain rate enhances the activation of extension twinning dramatically, while contraction and secondary twinning are not significantly influenced. The polarity of extension twinning is even reversed in some grains under selected testing conditions. Significant grain subdivision by the formation of geometrically necessary boundaries (GNBs) takes place during both quasi-static and dynamic deformation of this AZ31 alloy. It is remarkable that GNBs of high misorientations form even at the highest strain rates. The phenomenon of recovery has been found to be orientation dependen

In this paper the effect of tool geometry and welding parameters on friction stir welded lap joints with AA2099-T83 and AA2060-T8E30 aluminium alloys has been investigated through the study of the material flow and weld formation along with the reaction forces during friction stir welding (FSW) for various sets of welding parameters and two FSW tools with different geometrical features. The results showed that welding parameters and tool probe geometry strongly affect the characteristics of the typical defect features (hook and cold lap defects) of the friction stir welded lap joints. From the relationship established between the welding parameters, tool probe geometry and the hook and cold lap defect formation, some guidelines are concluded with the objective of guaranteeing appropriate FSW lap joint properties.