We describe the detection characteristics of a device the Resonant Coil Magnetometer (RCM) to quantify paramagnetic particles (PMPs) in immunochromatographic (lateral flow) assays. Lateral flow assays were developed using PMPs for the measurement of total prostate specific antigen (PSA) in serum samples. A detection limit of 0.8 ng/mL was achieved for total PSA using the RCM and is at clinically significant concentrations. Comparison of data obtained in a pilot study from the analysis of serum samples with commercially available immunoassays shows good agreement. The development of a quantitative magneto-immunoassay in lateral flow format for total PSA suggests the potential of the RCM to operate with many immunoassay formats. The RCM has the potential to be modified to quantify multiple analytes in this format. This research shows promise for the development of an inexpensive device capable of quantifying multiple analytes at the point-of-care using a magneto-immunoassay in lateral flow format.

The present study assessed the effect of pig genotype (fattyv.lean) and dietary protein and lysine (Lys) levels (normalv.reduced) on intramuscular fat (IMF) content, subcutaneous adipose tissue (SAT) deposition, fatty acid composition and mRNA levels of genes controlling lipid metabolism. The experiment was conducted on sixty intact male pigs (thirty Alentejana purebred and thirty Large White × Landrace × Pietrain crossbred), from 60 to 93 kg of live weight. Animals were divided into three groups fed with the following diets: control diet equilibrated for Lys (17·5 % crude protein (CP) and 0·7 % Lys), reduced protein diet (RPD) equilibrated for Lys (13·2 % CP and 0·6 % Lys) and RPD not equilibrated for Lys (13·1 % CP and 0·4 % Lys). It was shown that the RPD increased fat deposition in the longissimus lumborum muscle in the lean but not in the fatty pig genotype. It is strongly suggested that the effect of RPD on the longissimus lumborum muscle of crossbred pigs is mediated via Lys restriction. The increase in IMF content under the RPD was accompanied by increased stearoyl-CoA desaturase (SCD) andPPARGmRNA levels. RPD did not alter backfat thickness, but increased the total fatty acid content in both lean and fatty pig genotype. The higher amount of SAT in fatty pigs, when compared with the lean ones, was associated with the higher expression levels ofACACA,CEBPA,FASNandSCDgenes. Taken together, the data indicate that the mechanisms regulating fat deposition in pigs are genotype and tissue specific, and are associated with the expression regulation of the key lipogenic genes.

In this study, a screen-printed electrode (SPE) modified with gold-nanoparticle-decorated reduced graphene oxide–carbon nanotubes (rGO-AuNPs/CNT/SPE) was used for the determination of estradiol (E2). The AuNPs were produced through an eco-friendly method utilising plant extract, eliminating the need for severe chemicals, and remove the requirements of sophisticated fabrication methods and tedious procedures. In addition, rGO-AuNP serves as a dispersant for the CNT to improve the dispersion stability of CNTs. The composite material, rGO-AuNPs/CNT, underwent characterisation through scanning electron microscopy (SEM), ultraviolet–visible absorption spectroscopy (UV–vis), Fourier-transform infrared (FTIR) spectroscopy, and atomic force microscopy (AFM). The electrochemical performance of the modified SPE for estradiol oxidation was characterised using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The rGO-AuNPs/CNT/SPE exhibited a notable improvement compared to bare/SPE and GO-CNT/SPE, as evidenced by the relative peak currents. Additionally, we employed a baseline correction algorithm to accurately adjust the sensor response while eliminating extraneous background components that are typically present in voltammetric experiments. The optimised estradiol sensor offers linear sensitivity from 0.05–1.00 µM, with a detection limit of 3 nM based on three times the standard deviation (3δ). Notably, this sensing approach yields stable, repeatable, and reproducible outcomes. Assessment of drinking water samples indicated an average recovery rate of 97.5% for samples enriched with E2 at concentrations as low as 0.5 µM%, accompanied by only a modest coefficient of variation (%CV) value of 2.7%.