Acoustic emission (AE) monitoring has become an optional technology to quantify slope deformation. However, there are still challenges in developing generic AE interpretation strategies. Dynamics and kinematics models are two physical methods for analysing slope stability, which appear to improve the interpretability of AE monitoring data. The aim of this study is to explore the change patterns and interrelations of dynamics, kinematics, and AE measurements using a model test and physical analysis, to further understand the development process of a progressive landslide. A model test is designed based on the kinematics model of landslide three-stage deformation. An equation between factor of safety (FoS) and thrust is proposed based on the mechanical model of a landslide test. There is a clear correspondence between the displacement and inverse velocity during the deformation-controlled process. Relationships are uncovered between the thrust and FoS as well as the thrust and acceleration. As a characteristic parameter of AE, ring down count (RDC) is able to quantify the deformation process of the soil slope. Moreover, acceleration and RDC can reflect the sudden change of the slope state and, hence, can be effective indicators for the early warning in a progressive landslide.
This paper is concerned with imaging techniques for mapping and locating underground pipeline leakage. Ground surface vibrations induced by the propagating axisymmetric wave can be measured by an array of acoustic/vibration sensors, with the extraction of magnitude information used to determine the position of leak source. A method of connected graph traversal is incorporated into the vibroacoustic technique to obtain the spatial image with better accuracy compared to the conventional magnitude contour plot. Measurements are made on a dedicated cast iron water pipe by an array of seven triaxial geophones. The spectral characteristics of the propagation of leak noise signals from underground water pipes to the ground surface are reported. Furthermore, it is demonstrated that suspicious leakage areas can be readily identified by extracting and fusing the feature patterns at low frequencies where leak noise dominates. The results agree well with the real leakage position in the underground pipeline.